maemo.org - Talk - [Announce] Sony Playstation 1 Emulators

Page 100 of 119

« First

< Prev

100

Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)

- Games (https://talk.maemo.org/forumdisplay.php?f=12)

- - [Announce] Sony Playstation 1 Emulators (https://talk.maemo.org/showthread.php?t=68770)

Mitrigol

2012-05-16 11:15

Re: [Announce] Sony Playstation 1 Emulators

Hey there, i upgraded to the new version.

But it seems i am missing somethign about the GUNCON.

If i understand properly, we can now use the gun controller, so fire by touching the screen? If yes, that's really great.

Back to my problem, i try a a game i used to play with gun controller: Die Hard Trilogy.
My problem is that when i select the GUNCON in pcsx settings, i can't do any actions, no move no start, no select no nothing.

So i followed your advice about chmod the event3 file.
But this did not resolve the problem.
Even 777 does not work... i don't understand what i am missing there. Something to configure?

Also, if i chmod the file, start the emulator and (try to) play, the event 3 file go back to its previous scurity attributes after i close the emulator.

Any advice would be appreciated.

Also can you tell me from which game you took the screenshot in your comment about GUNCON working with some tweaks above?

Best regards

EDIT: Just to tell that i tried to chmod as root or as user with the sudo chmod command

sakya

2012-05-16 11:49

Re: [Announce] Sony Playstation 1 Emulators

Quote:

Originally Posted by Mitrigol (Post 1207325)

If i understand properly, we can now use the gun controller, so fire by touching the screen? If yes, that's really great.

Yes.

Quote:

Back to my problem, i try a a game i used to play with gun controller: Die Hard Trilogy.

Wikipedia lists "Die Hard Trilogy 2: Viva Las Vegas" as compatible with the guncon:
http://en.wikipedia.org/wiki/GunCon#...mpatible_games

Quote:

Also, if i chmod the file, start the emulator and (try to) play, the event 3 file go back to its previous scurity attributes after i close the emulator.

It's normal: the gui changes the permission on the file and reset to the "default" on emulator exit (so if it works on exit you don't need to change any permisison manually).
Also: if you run the gui from terminal and the touchscreen is correctly initialized you'll see in the output a message like:

Code:

Touchscreen configured, device=/dev/input/ts

...

Controller set to GUNCON (SLPH-00034)

Quote:

Also can you tell me from which game you took the screenshot in your comment about GUNCON working with some tweaks above?

Time Crisis (no tweaks needed, just configure the game to use the guncon and start it from the the gui)

EDIT: It seems that "Die Hard Trilogy" is not compatible with the guncon but with the "Konami Justifier" (unsupported by pcsxrearmed)
http://en.wikipedia.org/wiki/Konami_Justifier

Acidspunk

2012-05-16 12:48

Re: [Announce] Sony Playstation 1 Emulators

Sakya Guncon games were crashing when I tried to start them so I tried running from terminal to see the output.

Code:

~ $ psx4m-gui

Reading roms from "/home/user/MyDocs/psx/" 

  Rom: "Crash Team Racing [SCUS-94426].bin" 

  Rom: "mtgp.bin" 

  Rom: "Pandemonium! 2 [U] [SLUS-00578].img" 

  Rom: "Pandemonium.bin" 

  Rom: "Point Blank.bin" 

  Rom: "pr-lssc1.bin" 

  Rom: "pr-lssc2.bin" 

  Rom: "Rage Racer.bin" 

  Rom: "RayCrisis [SLUS-01217].bin" 

  Rom: "Ridge Racer.iso" 

  Rom: "SCPH1001.BIN" 

  Rom: "Tomba! [U] [SCUS-94236].img" 

  Rom: "wip3outsp.iso" 

  Rom: "Wipeout XL [U] [SCUS-94351].img" 

Password:

It seems to ask for a password when I try to run a guncon game. if I start the game and just go to terminal and press enter at the password prompt the game runs but the keys won't work. Am I doing something wrong? The game I tried was point blank btw.

sakya

2012-05-16 12:52

Re: [Announce] Sony Playstation 1 Emulators

Quote:

Originally Posted by Acidspunk (Post 1207371)

It seems to ask for a password when I try to run a guncon game.

Probably it's the command

Code:

sudo chmod 666 /dev/input/event3

that asks for password.

I don't have this problem, but I have rootsh installed, maybe this is the difference?

What happens if you try that command from the terminal?

Acidspunk

2012-05-16 13:15

Re: [Announce] Sony Playstation 1 Emulators

I installed sudser and that took care of the password problem. Still, can't get the guncon to work on either Time Crisis or Point Blank. I also don't seem to get this message when running the emulator:

Code:

Touchscreen configured, device=/dev/input/ts

...

Controller set to GUNCON (SLPH-00034)

Mitrigol

2012-05-16 13:22

Re: [Announce] Sony Playstation 1 Emulators

So i did try time crisis as well and got same behaviour, no aciton possible while GUNCON selected in pcsx settings.

Also, as acidpunk said, i got no message about the touchscreen configured properly when running from terminal.

Will continue to try and follow this tread ;)

sakya

2012-05-16 13:30

Re: [Announce] Sony Playstation 1 Emulators

Quote:

Originally Posted by Mitrigol (Post 1207383)

Also, as acidpunk said, i got no message about the touchscreen configured properly when running from terminal.

Then you should have an error message, post the output.
The error message is after the "Loading memory card" message.
Example (permission problem, that should not be your case)

Code:

Loading memory card ./.pcsx/memcards/card1.mcd

Loading memory card ./.pcsx/memcards/card2.mcd

Failed pts_open, check permission on /dev/input/ts

Could not open touchscreen

@Acidspunk: Thanks the package needed to use the guncon is sudser ;)

Mitrigol

2012-05-16 14:08

Re: [Announce] Sony Playstation 1 Emulators

here is what i get when loading from terminal:

Code:

BusyBox v1.10.2 (Debian 3:1.10.2.legal-1osso30+0m5) built-in shell (ash)

Enter 'help' for a list of built-in commands.



~ $ psx4m-gui

Reading roms from "/media/mmc1/N900GameAndFiles/Emulation/PS1/" 

  Rom: "die_hard_trilogy_(v1.1).bin" 

  Rom: "FF Tactics.img" 

  Rom: "Heart of Darkness Disc One.BIN" 

  Rom: "Kula World.img" 

  Rom: "Time Crisis (E) (Track 01) [SCES-00657].bin" 

  Rom: "Vandal Hearts.img" 

  Rom: "WIPEOUT.img" 

  Rom: "WIPEOUT2.img" 

  Rom: "WO3.img" 

Saving cfg to "/home/user/.config/Team16/psx4m/Time Crisis (E) (Track 01) [SCES-00657].bin" 

/opt/maemo/usr/games/pcsx -nosound -mcd1 /home/user/.pcsx/memcards/card1.mcd -mcd2 /home/user/.pcsx/memcards/card2.mcd -keys /home/user/.config/Team16/keys/keys -guncon -frameskip 0 -spu_interpolation 0 -region -1 -cdfile /media/mmc1/N900GameAndFiles/Emulation/PS1/Time Crisis (E) (Track 01) [SCES-00657].bin

sakya

2012-05-16 14:10

Re: [Announce] Sony Playstation 1 Emulators

Quote:

Originally Posted by Mitrigol (Post 1207409)

here is what i get when loading from terminal:

Ops, sorry my fault the output I posted is the one from the emulator, not the gui (I think I'll modify the gui to output at least the stderr).

Please, run this command in the terminal and post the output:

Code:

/opt/maemo/usr/games/pcsx -nosound -mcd1 /home/user/.pcsx/memcards/card1.mcd -mcd2 /home/user/.pcsx/memcards/card2.mcd -keys /home/user/.config/Team16/keys/keys -guncon -frameskip 0 -spu_interpolation 0 -region -1 -cdfile /media/mmc1/N900GameAndFiles/Emulation/PS1/Time Crisis (E) (Track 01) [SCES-00657].bin

Mitrigol

2012-05-16 14:23

Re: [Announce] Sony Playstation 1 Emulators

there it is, note that i had to rename my game file.

Code:

BusyBox v1.10.2 (Debian 3:1.10.2.legal-1osso30+0m5) built-in shell (ash)

Enter 'help' for a list of built-in commands.



~ $ /opt/maemo/usr/games/pcsx -nosound -mcd1 /home/user/.pcsx/memcards/card1.mcd -mcd2 /home/user/.pcsx/memcards/card2.mcd -keys /home/user/.config/Team16/keys/keys -guncon -frameskip 0 -spu_interpolation 0 -region -1 -cdfile /media/mmc1/N900GameAndFiles/Emulation/PS1/TimeCrisis.bin     Running PCSX Version 1.9 (May 16 2012).

Init new dynarec

Loading memory card /home/user/.pcsx/memcards/card1.mcd

Loading memory card /home/user/.pcsx/memcards/card2.mcd

/lib/libts-0.0.so.0: cannot open shared object file: No such file or directory

Could not open touchscreen

plugin: /opt/maemo/usr/games/plugins/builtin_gpu

plugin: /opt/maemo/usr/games/plugins/spunull.so

plugin: /opt/maemo/usr/games/plugins/builtin_pad

plugin: /opt/maemo/usr/games/plugins/builtin_pad

Plugins loaded.

Loaded CD Image: /media/mmc1/N900GameAndFiles/Emulation/PS1/TimeCrisis.bin.

CD-ROM Label: TIMECRISIS                      

CD-ROM ID: SCES00657

ari64_reset

Keys config read from /home/user/.config/Team16/keys/keys

Controller set to GUNCON (SLPH-00034)

Note: running without BIOS, expect compatibility problems

What's this libts thing i seem to miss?

EDIT: Yey 1000th post!

All times are GMT. The time now is 23:12.

Page 100 of 119

100

Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8