maemo.org - Talk - SailfishOS 2.0 Nexus 5 CM12.1 Alpha1

Well done! I am happy for your progress. :)

For me it is interesting because all (kernel, hybris-hal, packaging, build) finished without error but my image (3rd one) still stuck on the logo. (I just installed and checked with trying to start the phone but haven't got the chance to check whether I can telnet into the last one because I fell asleep.)
Probably there was(were) problem(s) otherwise it would start normally, but I expect the image to boot up if all steps in hadk completes without error. Well, as somebody said to me, porting isn't an easy task. :)

edp17

2019-12-11 11:43

Re: SailfishOS 2.0 Nexus 5 CM12.1 Alpha1 | Sfdroid Pre-Alpha/Early Preview

Quote:

Originally Posted by mautz (Post 1562991)

@edp17

If you could uüpload a few files from your buil, i'd like to setup a test repo in my OBS account to check if the OTA bug is also gone.

If everything is fine, we'll ask for your own OBS account.

@mautz
I know you are busy with your cm14.1 port but I appreciated if you could let me know when your are going to set the mentioned test repo up in your OBS. And what files you need from me. Thank you.
(Don't want to urge you at all, I just asked.)

mautz

2019-12-13 08:34

Re: SailfishOS 2.0 Nexus 5 CM12.1 Alpha1 | Sfdroid Pre-Alpha/Early Preview

@edp17

These are the files i need, i hope i didn't forgot anything.

Code:

audioflingerglue-xxxx.armv7hl.rpm        

audioflingerglue-devel-xxxx.noarch.rpm                

droid-hal-hammerhead-xxxx.armv7hl.rpm

droid-hal-hammerhead-devel-xxxx.armv7hl.rpm        

droid-hal-hammerhead-img-boot-xxxx.armv7hl.rpm        

droid-hal-hammerhead-img-recovery-xxxx.armv7hl.rpm        

droid-hal-hammerhead-kernel-xxxx.armv7hl.rpm        7.34 MB        

droid-hal-hammerhead-kernel-modules-xxxx.armv7hl.rpm        

droid-hal-hammerhead-kernel-modules-xxxx.armv7hl.rpm        

droid-hal-hammerhead-tools-xxxx.armv7hl.rpm

droidmedia-xxxx.armv7hl.rpm        

droidmedia-devel-xxxx.noarch.rpm

edp17

2019-12-15 02:19

Re: SailfishOS 2.0 Nexus 5 CM12.1 Alpha1 | Sfdroid Pre-Alpha/Early Preview

Quote:

Originally Posted by mautz (Post 1563253)

@edp17

These are the files i need, i hope i didn't forgot anything.
...

I have sent a PM. Thank you for trying this for me.

mautz

2019-12-15 16:54

Re: SailfishOS 2.0 Nexus 5 CM12.1 Alpha1 | Sfdroid Pre-Alpha/Early Preview

Quote:

Originally Posted by edp17 (Post 1563303)

I have sent a PM. Thank you for trying this for me.

Thanks!

Do you have a package called droid-hal-hammerhead-users on your system? Should be in your local repo folder. Could you upload it please?

edp17

2019-12-15 17:48

Re: SailfishOS 2.0 Nexus 5 CM12.1 Alpha1 | Sfdroid Pre-Alpha/Early Preview

Quote:

Originally Posted by mautz (Post 1563310)

Thanks!

Do you have a package called droid-hal-hammerhead-users on your system? Should be in your local repo folder. Could you upload it please?

Sorry, I was away on a family event. PM has sent.

mautz

2019-12-15 18:42

Re: SailfishOS 2.0 Nexus 5 CM12.1 Alpha1 | Sfdroid Pre-Alpha/Early Preview

Thank you very much!

https://s19.directupload.net/images/...p/2dxxioae.png

If you want to test, here are the repos:

Code:

adaptation-community-common 

http://repo.merproject.org/obs/nemo:/devel:/hw:/common/sailfish_latest_armv7hl/



adaptation-community-hammerhead

http://repo.merproject.org/obs/home:/mautz:/cm12.1/sailfish_latest_armv7hl/

matemana

2019-12-16 08:42

Re: SailfishOS 2.0 Nexus 5 CM12.1 Alpha1 | Sfdroid Pre-Alpha/Early Preview

Quote:

Originally Posted by edp17 (Post 1563178)

I am sure you can install a mainline kernel on the Nexus 5. Maybe that is challenging maybe not but is possible.
But if we don't use android base, Sailfish cannot communicate with the hardware.
However writing drivers are possible too, but you need to write every single one of them and there are no documentation because those are proprietary.
The guys at Replicant are rewriting android drivers but they do support only a handful of devices and not all drivers they were able to reverse engineer. Plus, I use that Replicant 6 (Android 6 equivalent) on my Galaxy S2-i9100 but there are lots of 'the app stopped' error and some apps doesn't start or immediately ends. In my personal opinion the OS is usable, but Sailfish is better. (I hope soon can start working on this port too :).)

Here this project is using latest linux kernel on Nexus 5.X It does not use any android parts of the system. It's an amzing project but it does not work well enough for daily driver YET. That's real desktop linux for phone. https://wiki.postmarketos.org/wiki/G...(lg-hammerhead)

edp17

2019-12-16 09:20

Re: SailfishOS 2.0 Nexus 5 CM12.1 Alpha1 | Sfdroid Pre-Alpha/Early Preview

Quote:

Originally Posted by matemana (Post 1563317)

Hi matemana, good to see you here again. From my other account I sent you a pm on xda about a month ago. I am not sure you have seen that. :)

Unfortunately the PMOS doesn't work with multirom. (I have tried to extract the kernel, rootfs and other stuff then extract the rootfs. At the end it didn't boot and I just messed up my Sailfish rom that I used for this experiment. :rolleyes:)
Then I have tried PMOS (xfce4) on my S2 (i9100) but didn't really work too much in there. Probably the Nexus 5 development is more advanced but as it doesn't work with multirom...

Edit: The link is broken in your post. (The closure ) is missing.) Here is the good one: PMOS for hammerhead

edp17

2019-12-16 13:03

Re: SailfishOS 2.0 Nexus 5 CM12.1 Alpha1 | Sfdroid Pre-Alpha/Early Preview

Quote:

Originally Posted by mautz (Post 1563314)

Thank you very much!

https://s19.directupload.net/images/...p/2dxxioae.png

If you want to test, here are the repos:

Code:

adaptation-community-common 

...

Are you sure this adaptation-community-common shouldn't be adaptation-community-common-hammerhead?

(Previously we have added two repos: adaptation-community-hammerhead and adaptation-community-common-hammerhead)
Thanks.

All times are GMT. The time now is 09:06.

Page 104 of 125

104

Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8