Re: N900 Not Booting & Problems
 

done
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved

C:\Users\GOD>cd "C:\Program Files (x86)\maemo\flasher-3.5"
The system cannot find the path specified.

C:\Users\GOD>cd "C:\Program Files\maemo\flasher-3.5"

C:\Program Files\maemo\flasher-3.5>

Re: N900 Not Booting & Problems
 

and if you load flasher-3.5.exe?

Re: N900 Not Booting & Problems
 

C:\Users\GOD>cd "C:\Program Files\maemo\flasher-3.5"

C:\Program Files\maemo\flasher-3.5> flasher-3.5.exe

C:\Program Files\maemo\flasher-3.5>

nothing....another terminal blinked and gone...

Re: N900 Not Booting & Problems
 

i am out of idea. you have to make your flash work, maybe you have to disable UAC in windows or start cmd.exe as admin.

Re: N900 Not Booting & Problems
 

you said it.......:D:D:D:D:D:D:D:D

run as admin
worked
C:\Program Files\maemo\flasher-3.5> flasher-3.5.exe
flasher v2.5.2 (Sep 24 2009)

Nothing to do!
Usage: flasher [OPTIONS]
Options:
-F, --fiasco=ARG Location of a FIASCO image
-k, --kernel=ARG Location of kernel image
-n, --initfs=ARG Location of initfs image
-r, --rootfs=ARG Location of root JFFS2 image
--cmt-2nd=ARG Location of CMT FIASCO 2nd image
--cmt-algo=ARG Location of CMT FIASCO algorithm image
--cmt-mcusw=ARG Location of CMT FIASCO MCUSW image
--cmt-no-verify Disable verification of CMT programming
-x, --xloader=ARG Location of X-Loader image
-s, --secondary=ARG Location of NOLO secondary bootloader image
-2, --2nd=ARG Location of NOLO cold flasher ("2nd") image
-u, --unpack[=ARG] Unpack a FIASCO image
-f, --flash Load and flash all supplied images
-l, --load Only load all supplied images
-b, --boot[=ARG] Boot the kernel with optional cmdline
-R, --reboot Reboot the board (e.g. after flashing NOLO)
-i, --read-device-id Print out the device type
-S, --serial-port=ARG Serial port used for cold flashing or "usb"
-I, --init-port Only initialize the serial port
-c, --cold-flash "Cold flash" the device
-h, --hw-revision=ARG Specify product code and HW revision
--enable-rd-mode Enable R&D mode on the device
--disable-rd-mode Disable R&D mode on the device
--set-rd-flags[=ARG] Set R&D mode flags on the device
--clear-rd-flags[=ARG] Clear R&D mode flags on the device
--query-rd-mode Query the device R&D mode status and flags
--set-hw-revision[=ARG] Set HW revision override on device
--flash-only=ARG Flash only certain components
-U, --usb-device=ARG Specify USB device to use (bus:device address)

C:\Program Files\maemo\flasher-3.5>

Re: N900 Not Booting & Problems
 

finally!

now try the normal flash command first

Re: N900 Not Booting & Problems
 

:(
C:\Program Files\maemo\flasher-3.5>flasher-3.5.exe -F emmc.bin -f
flasher v2.5.2 (Sep 24 2009)

Image 'mmc', size 255947 kB
Version RX-51_2009SE_10.2010.13-2.VANILLA
Suitable USB device not found, waiting.
USB device found found at bus bus-0, device address \\.\libusb0-0001--0x0421-0x0
105.
Found device RX-51, hardware revision 2204
NOLO version 1.4.14
Version of 'sw-release': RX-51_2009SE_21.2011.38-1_PR_MR0
Booting device into flash mode.
Suitable USB device not found, waiting.
USB device found found at bus bus-0, device address \\.\libusb0-0001--0x0421-0x0
1c8.
Raw data transfer EP found at EP2.
[init 20 % 27648 / 255947 kB 10098 kB/s]
C:\Program Files\maemo\flasher-3.5>

BTW ..phone is not normal....I mean...it shows nokia with settings icon...product description in green etc...hope you remember

Re: N900 Not Booting & Problems
 

okay, now try the rescue os one

Re: N900 Not Booting & Problems
 

C:\Program Files\maemo\flasher-3.5> flasher-3.5 -k 2.6.37 -n rescueOS-initrd-0.5
.4.img -l -b"rootdelay root=/dev/ram0"
flasher v2.5.2 (Sep 24 2009)

rescueOS-initrd-0.5.4.img: No such file or directory

C:\Program Files\maemo\flasher-3.5>

both files 2.6.37 and rescueOS-initrd-0.5.4.img.sig in C:\Program Files\maemo\flasher-3.5

Re: N900 Not Booting & Problems
 

yesm this is because you enabled R&D mode earlier