Re: QtIrreco for N900
 

I just Installed PR1.3 and QTirecco is not transmitting any signals. I had this on PR and it worked fine. Does this mean PR1.3 does not work with this app??

Re: QtIrreco for N900
 

Working fine here on PR 1.3.

Re: QtIrreco for N900
 

I've the Same issue :(

Re: QtIrreco for N900
 

Could this be because there was the same config file from previous install??

Re: QtIrreco for N900
 

Is there a way to retrieve a remote that I uploaded online? It gets stuck when I press one of the categories and won\t do anything. Was wondering what their site is where you can download the remotes.

Re: QtIrreco for N900
 

I'm still having the problem is it a PR 1.3 or wrong configuration

Re: QtIrreco for N900
 

I also do not have QTIrreco working anymore after upgrading to PR 1.3.

This is a major bug, in my opinion.

Re: QtIrreco for N900
 

I would try using the CT-90205 and CT-90275 if I were you. I also have a toshiba remote and my codes weren't uploaded by anyone so I tried one that was close in model number and it worked fine.

Re: QtIrreco for N900
 

I tried irreco a few months ago, it didn't work.. because i don't have too much time to fool around, i uninstalled it. Today i upgraded my firmware to PR1.3 after that i installed the QT Irreco ,and it worked fine for about 2 hours, then all of the sudden it stopped working.. I didn't install any other apps or did something weird with it.. anyone has same problems? and maybe a sollution?

Re: QtIrreco for N900
 

Same here :(

Has anyone found a work around to get it to work again? Both my TV and amp controllers have been lost and so it was an app I used all the time.

Re: QtIrreco for N900
 

hey guys i had the same problem you need to purge the programme and check mydocs that all qtirreco folders are gone then apt_get it in x terminal test it out if it still isnt working make sure youve started lirc. hope this helps :)

Re: QtIrreco for N900
 

Cheers mate, this worked for me.

Re: QtIrreco for N900
 

Hi there, I'm trying to create a new controller for a PC/USB ir controller, it's a cheap model but very useful for me. But this model it is not on the list (even because it has no brand anymore, I bought it from dealextreme)...
Is there some way to capture the IR signal send by the IR controller? (*I had an palm years ago with a IR program with that funcionality)

Re: QtIrreco for N900
 

not on the n900 itself but you can capture the signal on a pc with an IR receiver and transfer it to QtIrreco

Re: QtIrreco for N900
 

hi im new with this app, to make it work besides the brand should i look by my lcd model number or remote control number ?

thanks

Re: QtIrreco for N900
 

Remote?
Look up both, just in case.

Re: QtIrreco for N900
 

yes my control remote.

but when i get closer to find it, it freeze or i get an error after downloading like...
Error with button config
failed to load button config. using default button instead.
i hit done, but i keep getting the error over and over.

my lcd model is samsung lnt4065f and for my remote BN59-00599A.
can someone take a look maybe and help me out where to go.

theres too many paths like, abc tv samsung, lcd tv, samsung, samsuntv,televicion twice, televicion lcd,etc.
i think theres should be a search, too complicated, or they should narrow the options

Re: QtIrreco for N900
 

Here is direct link to need config file:

http://lirc.sourceforge.net/remotes/samsung/BN59-00599A

And, I strongly suppose that these remotes are uploaded by individuals, not a company, that's why sometimes there is a mess (thomson and thompson, for instance; but I don't see samsuntv,televicion, televicion lcd at all).

Where this conf file should be saved for program to see it, search in this thread.

Re: QtIrreco for N900
 

thank you for the link, and the samsuntv, televicion, televicion lcd, etc i found it when clicking in Download from DB, remote type, there.
theres too many options for samsung, and most of em, just freeze or dont give you what you really looking for

Re: QtIrreco for N900
 

Does anyone know what remote i download for this tv please?

http://www.argos.co.uk/static/Produc...SAMSUNG+37.htm

Thankyou

Re: QtIrreco for N900
 

vir3us, look closer your remote, its model number is usually written somewhere (left bottom corner, under battery cover, etc.)

Re: QtIrreco for N900
 

Yea i do see BN59-01014A but could'nt find it. Does it have to be exact or can i use a BN59 one? There are so many choices etc. Samsung, TV, television. Cheers

Re: QtIrreco for N900
 

No, you can try similar one. BN59-00940A or BN59-00937A are very similar to yours.

BN59-00940A

http://lirc.sourceforge.net/remotes/...N59-00940A.jpg

Re: QtIrreco for N900
 

Yh that looks pretty much the same as mine
http://www.4mysamsung.co.uk/cgi-bin/...&s=480&t=z&i=0

Sorry but i cant seem to find them ones either, maybe im going blind. do there come under television? it seems to only go upto BN59-008XXX

Re: QtIrreco for N900
 

Open QtIrreco -> select "Download Remote" -> go to letter "S" -> under Manufacturers find "samsung" -> under Remotes find "BN59-00940A"

Re: QtIrreco for N900
 

Sorry for being stupid, i was using irreco, downloaded Qtirreco now, will look. Cheers lol

Re: QtIrreco for N900
 

Thankyou for your help Kolos got it to work. This has just giving me an idea. Do you know if i can use this program to control my spot lights? as i have a ir remote for them so i can turn it on/off and dim them aswell. Would be amazing. I have this http://www.timeguard.com/products/li...remote-control

Re: QtIrreco for N900
 

Kolos maybe you can help me, this is my remote http://www.shopjimmy.com/samsung-bn5...te-control.htm
I do have Qtirreco, i went to Download Remote, and i found it there. but when i click it nothing happens, sames happen when i click in any model under samsung .

what could be wrong

Re: QtIrreco for N900
 

hey warren , I was just gonna post here, I have the same issue it seems after PR 1.3 Qtirreco is broken, can someone confirm?

Re: QtIrreco for N900
 

Hellflyer, for some really strange reason QtIrreco no longer works after a PR update. You may find that a purge with apt-get might help but if it doesn't there is only one other alternative that I know of and that is a drastic reflash including the eMMC. I have Qtirreco with PR1.3 working after that.

Re: QtIrreco for N900
 

sound too complicated, just for an app that im gonna try a couple of times..

Re: QtIrreco for N900
 

Thanks for the reply but I think the issue is with the app itself because I was using it before PR 1.3 and during update I did a full reflash including eMMC so it supposed to work properly , no?

Re: QtIrreco for N900
 

Yes the problem is with qtirreco but unfortunately I do not know what the update breaks. If you say you flashed the eMMC too then you should not be having this problem. try

apt-get remove --purge lirc qtirreco
rm -rf /home/user/MyDocs/qtirreco

and reinstall it

but if your problem is like mine it may not fix it. I had a similar problem with gnuplot where there was something still around after a purge which made it impossible to install again but I never found out what it was.

EDIT: Fixed path as pointed out by Kolos

Re: QtIrreco for N900
 

You're right unfortunately it didnt fix the problem when I tried to download a remote it just froze on the tab :(

ok what about irreco? will it work or after Qt version was out its no longer supported?

Re: QtIrreco for N900
 

If QtIrreco doesn't work after upgrade you try to uninstall app and delete map "qtirreco" from MyDocs, then install QtIrreco and download remotes again. This should resolve the problem.

Re: QtIrreco for N900
 

i havent done anything to it, but seems it working now, what happened is that the app is way too slowww. i click the remote and wait for a minute or more.

Re: QtIrreco for N900
 

Doesnt work for me :(

Re: QtIrreco for N900
 

i went to download remote, and manufactures and remote, when i click it, nothing happens, like its not working but it reacts in time, like 1 or 2 minutes after

Re: QtIrreco for N900
 

Try to remove application and install it again.

1. If you have already installed rootsh, open x-terminal and type next to remove QtIrreco:
2. Close x-terminal.

3. Open "File manager", tap on "N900", find folder "qtirreco" and delete it.

4. Open "App manager" and install QtIrreco.

5. Open QtIrreco and download remotes.

Re: QtIrreco for N900
 

seriously does anyone know how to get this working with a samsung virgin cable box? :(