Re: Overclock the N900?
 

@moerderameise the flasher on n900 is the same flasher that runs under windows. it will never finde the usb device, becouse it is it self :)

Re: Overclock the N900?
 

ok so when itself, how to flash directly on device? saw someone doing it, so i thought why not.

or how to flash in ubuntu? installed the 3.5 flasher but can't find him anywhere :D

Re: Overclock the N900?
 

I have the same problem.

I have this message (Suitable USB device not found, waiting) if i run flasher on Seven 64, Xp Mode or directly from my n900.

On windows I tried
flasher-3.5 -k kernel -f -R
flasher-3.5.exe -k kernel -f -R

And on n900
flasher -k kernel -f -R

Always the same message ^^

EDIT : Finally, work fine in XP mode. the driver was corrupted.

Thx for all ^^

Re: Overclock the N900?
 

Hey all!

Downloading the kernels is as easy as a few clicks away!!!

Go to http://www.farahfa.com/n900-custom-kernels/ to download the custom kernels!!!

Enjoy everyone!

Thanks to lehto for helping me out!

Also whenever there's a new update to those kernels they will be uploaded (by lehto) onto the same place.

Go ahead and check them out!

Re: Overclock the N900?
 

Here is zip file for:
-stock
-600mhz
-700mhz
-750mhz
-800mhz
-900mhz
-930mhz-500dsp

ONLY USE THESE IF YOU KNOW WHAT YOU R DOING AND UNDERSTAND THE RISK!!

www.saunalahti.fi/rauteemu/n900_overclock_v2.zip

Re: Overclock the N900?
 

To save everyone who is trying to flash a image with /usr/bin/flasher on their device from banging their head against a wall, can someone who has the SDK or still has PR1.0 on their device upload /sbin/fiasco-flasher somewhere? That way people can use the supplied kernel images to flash directly on their N900s.

Re: Overclock the N900?
 

Adding Teemu's kernels on my page so now there are more choices of OC's..

Tutorial page coming by tomorrow..

Re: Overclock the N900?
 

On Device Flashing.

Download one of the kernels below and place it on root of the mass memory, otherwise known as MyDocs.

700mhz

750mhz

800mhz

825mhz

900mhz

Run X Term and become root, then type fiasco-image-update /home/user/MyDocs/zImagexxx.fiasco

Replace the xxx with correct mhz number, e.g. if your flashing the 800mhz you need to type fiasco-image-update /home/user/MyDocs/zImage800.fiasco

Remember X Term is case sensitive.

Once done please reboot. ;)

This worked for me running PR1.1

If you want to return to the stock kernel then open X Terminal and become root, then use the following command apt-get --reinstall install kernel kernel-flasher and reboot.

Re: Overclock the N900?
 

are there different from the ones we are using now? or just renamed?

do the retain the firmware information?

do you have 900mhz?

cheers buddy

Re: Overclock the N900?
 

@biggzy

Don't remove programs or other things?