Re: Handtec sourced N9 crashes thread
 

Both the first and second handsets report the same firmware version in the handsets: 10.2011.34-1_PR_001, so they should be the same.

Thanks

Re: Handtec sourced N9 crashes thread
 

@People with randomly rebooting devices and developer mode enabled - could you send me a dmesg output right after a reboot ?

Re: Handtec sourced N9 crashes thread
 

This is the error from dmesg just before a reboot and the dmesg after the reboot:

http://paste.mononoke.nl/paste/view/11262597

Looks like the dmesg after reboot is just a clean startup from linux. (no data left in the buffer with the crash just before reboot.)

Re: Handtec sourced N9 crashes thread
 

I just shipped my phone back to handtec today. My phone started to reboot and freeze a lot since yesterday, at one point it deleted all of SMS, e-mails and contacts.

I'm so fed up with the issue, so I requested a refund instead of a replacement. I just can't imagine how can a product with full of bugs being released to the public. Bad NOKIA!!!!

Re: Handtec sourced N9 crashes thread
 

Here you go!

http://chris.intrepid.cx/n900/meego9-dmesg.txt

Re: Handtec sourced N9 crashes thread
 

I don't wish to muddy the water, but i noticed that there is an option to update/reload the phone software in PC Suite. File > Update phone software.

Is this not an easier option than flashing?

Re: Handtec sourced N9 crashes thread
 

This looks to be a hardware issue. It happens. Seems like the guys in Finland can't get a break. The phones from China don't seem to be having the reboot / crashing problems.

Re: Handtec sourced N9 crashes thread
 

A sad day :( About to box my N9 up to send back to Handtec... I love the OS and the blackness of the amoled, but the crashes were getting too much. I will think about whether to spend my £575 elsewhere or save it into my 'N9' pot...

I disliked muchly the VKBD though...

Re: Handtec sourced N9 crashes thread
 

I'm also affected by recurring crashes, handset UI hangs and application
aborts. My N9 is a black 64 GB model bought in Germany, product code
seems 059J1V4 (taken from /home/user/MyDocs/capability.xml).

Nothing obvious in the syslog. In dmesg i've seen a number of SGX crashes but these do not necessarily correlate with hangs or reboots.

However, i've seen some ECC error messages in dmsg and i've been
wondering if other see the same:

[ 0.138793] onenand_wait: ECC error = 0x8888, addr1 0x52, addr8 0x80
[ 0.138824] mtdoops: read failure at 458752 (8 of 8 read), err -74
[ 0.139068] onenand_wait: ECC error = 0x8888, addr1 0x55, addr8 0x80
[ 0.139099] mtdoops: read failure at 851968 (8 of 8 read), err -74
[ 0.139190] mtdoops: ready 0, 30 (no erase)
[ 0.139221] mtdoops: Attached to MTD device 3

Previous dmesg output had less ECC errors and/or different addresses.
I've also seen other dmesg that has no ECC errors reported.

So i'm wondering if this ECC error indicates a hardware failure.
Does anyone affected by frequent crashes see ECC error messages
as well?

Re: Handtec sourced N9 crashes thread
 

I got my N9 from Handtec on Monday two weeks ago. Mine is working fine ... I haven't got dev mode enabled though.