maemo.org - Talk
Page 13 of 33 « First 31112 13 141523 Last »
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   Nokia N9 / N950 (https://talk.maemo.org/forumdisplay.php?f=51)
-   -   overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.7] (https://talk.maemo.org/showthread.php?t=83357)

Makeclick 2012-04-30 14:24
Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.2] [ui v1.0]
 
Quote:
Originally Posted by Dared (Post 1199496)
Phone still reboots at 1300mhz even after updating to the latest modules. Looks like my silicone isn't as good :(
don't forget enable custom voltage and set it 133-135. It will work. If you not enable custom voltage. It will use too low voltage. Hope this will help you.

masndriza 2012-04-30 14:46
Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.2] [ui v1.0]
 
1 Attachment(s)
Quote:
Originally Posted by bnwg (Post 1199491)
It was denied when you tried to install opptimizer_1.5.2. Therefore you don't have the modules installed.

Try to delete signature.local which should be located same as your opptimizer file and give it a kick again. It should work.

If not, uninstall opptimizer_1.5.1, delete signature.local, reboot (?) and then install opptimizer_1.5.2 then opptimizer-ui.

The method above works for me. But there may be some better ways from others to solve this.
I followed your instructions.
modules are installed. but does not work

I solved. Sorry for the questions.
I had forgotten to enable inception.

Sniper_swe 2012-04-30 17:45
Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.2] [ui v1.0]
 
1.375v 1375mhz works well. 1400 mhz device got sluggish after opening conky. (strange) Not rebooting just get sluggish:P
Tryinge higher voltage now.

Creamy Goodness 2012-04-30 18:02
Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.2] [ui v1.0]
 
I told you guys many times if it's sluggish it's overheating, don't bump the voltage more.

Arie 2012-04-30 18:12
Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.2] [ui v1.0]
 
Quote:
Originally Posted by Creamy Goodness (Post 1199605)
I told you guys many times if it's sluggish it's overheating, don't bump the voltage more.
They won't listen... Save your breath.

Creamy Goodness 2012-04-30 18:26
Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.2] [ui v1.0]
 
I wouldn't listen either :P

Timpaxi 2012-04-30 18:48
Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.2] [ui v1.0]
 
So, does opptimizer work only when app is on/background?

Arie 2012-04-30 18:59
Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.2] [ui v1.0]
 
Quote:
Originally Posted by Timpaxi (Post 1199629)
So, does opptimizer work only when app is on/background?
Like the Ronco Roaster tag line: You set it and forget it!

Timpaxi 2012-04-30 19:10
Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.2] [ui v1.0]
 
Quote:
Originally Posted by Arie (Post 1199637)
Like the Ronco Roaster tag line: You set it and forget it!
Nice, thanks.

Timpaxi 2012-04-30 20:15
Re: overclocking kernel modules for PR1.2
 
Quote:
Originally Posted by Timpaxi (Post 1199252)
what is this app. And can i get it somewhere.
Why i have D50% and that pic has C25%.... Conky i mean..

Sniper_swe 2012-04-30 20:57
Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.2] [ui v1.0]
 
Quote:
Originally Posted by Creamy Goodness (Post 1199605)
I told you guys many times if it's sluggish it's overheating, don't bump the voltage more.
Sorry. Have missed alot in this thread
Lately. :p

Makeclick 2012-04-30 21:00
Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.2] [ui v1.0]
 
Does someone have this http://talk.maemo.org/showthread.php...ight=sociality with opptimizer? Does your normal facebook working?

If you want to test to install the Sociality and maybe broke your normal facebook. Install Sociality and install the opptimizer kernel module again, does your normal facebook still working :)? My facebook is still broken and nobody will not help :(. How i can delete facebook configs or reinstall and reset it?

baem90 2012-04-30 23:26
Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.2] [ui v1.0]
 
maybe this is a stupid question, but i really want to know,
does charging the phone get affected while opptimizing the Mhz/Voltage?

HanzBlix 2012-05-01 00:20
Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.2] [ui v1.0]
 
Quote:
Originally Posted by Makeclick (Post 1199703)
Does someone have this http://talk.maemo.org/showthread.php...ight=sociality with opptimizer? Does your normal facebook working?

If you want to test to install the Sociality and maybe broke your normal facebook. Install Sociality and install the opptimizer kernel module again, does your normal facebook still working :)? My facebook is still broken and nobody will not help :(. How i can delete facebook configs or reinstall and reset it?
I seriously doubt opptimizer has anything to do with facebook playing up, especially with the sociality page saying that it's a pre release version that you installed, I wonder where the bugs are more likely to have come from..... you're on a witch hunt asking facebook questions in this thread, you already linked probably the best thread to look and ask questions about that, also search and if they cant answer there, well try to give them time to answer first then new relevant thread.
Edit: in fact this should probably be a bug report in the sociality thread.

HanzBlix 2012-05-01 00:26
Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.2] [ui v1.0]
 
Quote:
Originally Posted by baem90 (Post 1199759)
maybe this is a stupid question, but i really want to know,
does charging the phone get affected while opptimizing the Mhz/Voltage?
I've done that before and noticed nothing unusual at least, but that reminds me..... Not long before I tried the UI, I found out that if you reboot your phone while on the charger, your overclock remains..... Not sure if it's still the case with UI installed.
Edit: Ok it's still the case, and by reboot I meant turn the phone off and on again not a crash reboot, I'm not testing that on purpose.

HanzBlix 2012-05-01 00:42
Re: overclocking kernel modules for PR1.2
 
Quote:
Originally Posted by Timpaxi (Post 1199684)
Why i have D50% and that pic has C25%.... Conky i mean..
C for charge and D for drain if I'm not mistaken, it changes if it's plugged in or not plugged in.

Timpaxi 2012-05-01 09:28
Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.2] [ui v1.0]
 
Quote:
Originally Posted by Makeclick (Post 1199703)
Does someone have this http://talk.maemo.org/showthread.php...ight=sociality with opptimizer? Does your normal facebook working?

If you want to test to install the Sociality and maybe broke your normal facebook. Install Sociality and install the opptimizer kernel module again, does your normal facebook still working :)? My facebook is still broken and nobody will not help :(. How i can delete facebook configs or reinstall and reset it?
Maybe flash your phone..

Timpaxi 2012-05-01 09:29
Re: overclocking kernel modules for PR1.2
 
Quote:
Originally Posted by HanzBlix (Post 1199786)
C for charge and D for drain if I'm not mistaken, it changes if it's plugged in or not plugged in.
Yeah, that's it.. Thanks. :)

F2thaK 2012-05-01 11:00
Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.2] [ui v1.0]
 
How are peoples N9's going charging overnight face-down?

My device passed the OppUI 1400MHz Test yesterday, worked fine until this morning the screen wouldnt come on again.

It was on wall charger and screen was facing down.

Makeclick 2012-05-01 11:00
Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.2] [ui v1.0]
 
@HanzBlix
@Timpaxi

That is why i ask IF someone has Sociality and Opptimizer to make sure.

Yep! I already reflash it! and when i get all my settings back.. facebook fail again :/ and i haven't even installed sociality anymore and it's fail when i installed opptimizer.. So.. Something with my old settings and opptimizer kills it. And the Ovistore 5x download limit is sooooo fu*** stupid!

F2thaK 2012-05-01 11:01
Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.2] [ui v1.0]
 
Ive found using backup can stuff your device sometimes, especially after big changes, IE overclocking

drvar 2012-05-01 11:16
Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.2] [ui v1.0]
 
I've got black screen after trying 1.4 GHz. What's the point if having 3.5% lower frequency is doing good enough and no problems with black screens and reboots.
It would make sense if it would be possible to overclock to 1.5 or higher, otherwise not.

Makeclick 2012-05-01 11:17
Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.2] [ui v1.0]
 
Quote:
Originally Posted by F2thaK (Post 1199970)
Ive found using backup can stuff your device sometimes, especially after big changes, IE overclocking
YEP! I thinking, that N9 backup make more bad than good.. it restore your problem always :D, but not your apps or nothing important.

Someone tallented guy could make some working backup app for N9.

F2thaK 2012-05-01 11:28
Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.2] [ui v1.0]
 
Quote:
Originally Posted by Makeclick (Post 1199986)
YEP! I thinking, that N9 backup make more bad than good.. it restore your problem always :D, but not your apps or nothing important.

Someone tallented guy could make some working backup app for N9.
BackupMenu would be ideal to port to N9...... I LOVED that app for the N900.

Makeclick 2012-05-01 11:32
Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.2] [ui v1.0]
 
Hmm.. this is odd http://talk.maemo.org/showpost.php?p...9&postcount=25
So it is not the Sociality and this problem is somehow linked at the Opptimizer..

F2thaK 2012-05-01 11:34
Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.2] [ui v1.0]
 
Reflash. Do not Restore Backup. Install Opptimizer. Should be fixed.

Timpaxi 2012-05-01 13:25
Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.2] [ui v1.0]
 
In what temperatures are your phones? And what is too high temp.? Mine is between 29-34 degrees.. A bit warm from behind when using little harder.

Arie 2012-05-01 13:28
Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.2] [ui v1.0]
 
Quote:
Originally Posted by Makeclick (Post 1199997)
Hmm.. this is odd http://talk.maemo.org/showpost.php?p...9&postcount=25
So it is not the Sociality and this problem is somehow linked at the Opptimizer..
Never faced that with the opptimizer and I've had the very early version. Honestly, the more time I spend using it the more I am certain that 1100mhz is the safest number to leave my N9 at with stock voltage. But hey to each their own.

Quote:
Originally Posted by Timpaxi (Post 1200038)
In what temperatures are your phones? And what is too high temp.? Mine is between 29-34 degrees.. A bit warm from behind when using little harder.
I don't see above 28 degrees ever. Even when I was overclocked over 1300mhz.

Dragoss91 2012-05-01 13:55
Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.2] [ui v1.0]
 
mine is running so far 1.35ghz with 1.375v sr off , still testing

Arie 2012-05-01 13:57
Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.2] [ui v1.0]
 
Quote:
Originally Posted by Dragoss91 (Post 1200069)
mine is running so far 1.3ghz with 1.375v sr off , still testing
I keep sr on. At the voltage you are at and the mhz, the only problem I encountered was the N9 heated up too quickly. I wasn't comfortable with melting my chipset, so I brought the clock down to 1100mhz at stock voltage and things worked out.

How long have you been using that match up?

zapotek 2012-05-01 14:35
Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.2] [ui v1.0]
 
1 Attachment(s)
finally :D :D thanks everyone

Viny 2012-05-01 15:29
Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.2] [ui v1.0]
 
Can someone help me with step by step install?

Creamy Goodness 2012-05-01 15:30
Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.2] [ui v1.0]
 
Quote:
Originally Posted by Makeclick (Post 1199969)
@HanzBlix
@Timpaxi

That is why i ask IF someone has Sociality and Opptimizer to make sure.

Yep! I already reflash it! and when i get all my settings back.. facebook fail again :/ and i haven't even installed sociality anymore and it's fail when i installed opptimizer.. So.. Something with my old settings and opptimizer kills it. And the Ovistore 5x download limit is sooooo fu*** stupid!
Here's the list of things Opptimizer does that would affect facebook:

Dared 2012-05-01 15:38
Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.2] [ui v1.0]
 
1250 MHz with 1.375 voltage and Sr on is working for me.....

drvar 2012-05-01 19:03
Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.2] [ui v1.0]
 
I'm still runing on 1375 without any sign of problems for couple of days.

smph 2012-05-01 19:06
Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.2] [ui v1.0]
 
Humdum, just got a crash after more than five days of stable usage, looks like it's quite hard to verify that the settings are completely stable.

ibrakalifa 2012-05-01 19:22
Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.2] [ui v1.0]
 
1,35ghz for a week, and sooo stable

Arie 2012-05-01 19:41
Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.2] [ui v1.0]
 
Quote:
Originally Posted by ibrakalifa (Post 1200358)
1,35ghz for a week, and sooo stable
What voltage?

ibrakalifa 2012-05-01 19:46
Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.2] [ui v1.0]
 
1375000 sir

Arie 2012-05-01 19:51
Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.2] [ui v1.0]
 
Quote:
Originally Posted by ibrakalifa (Post 1200388)
1375000 sir
Yup, that should be stable.


All times are GMT. The time now is 13:06.
Page 13 of 33 « First 31112 13 141523 Last »
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8