Re: [Announce] Pierogi - a universal infrared remote control app
 

I have to admit, projector support in Pierogi is pretty limited right now. I really do need to create a set of panels specifically for projector controls, as well as add a lot more config files. BTW, can you tell me anything about the projector you wanted to control (brand, model number, etc.)? Thanks!

Ah, well, I think Pierogi only has two car stereo keysets at the moment. :) I'll try to throw a few more in. (Again, can you tell me a little about the brand of the stereo? Thanks!)

EDIT: Whoops, I missed that you already specified "Dell". :) I see a config file for a Dell 1800MP, I'll see if I can add it in...

Re: [Announce] Pierogi - a universal infrared remote control app
 

well i ll throw in more details after inspecting them :)
thanx

Re: [Announce] Pierogi - a universal infrared remote control app
 

Alright, another update of Pierogi is now on its way to Extras-Devel. In this one, I've added the HDMI "Consumer Electronics Control", which may be called SimpLink, Anynet+, Bravia Link, and so on depending on the TV manufacturer. (This function allows you to control external devices connected to the TV using the TV's remote.)

I've also gone ahead and added in the "Energy Savings" key found on several models of TV.

In order to add these keys into Pierogi, I've once again fiddled with the panels. Rather than try to squeeze yet more buttons into the TV Menu panel, I've taken xes' advice and moved "guide" over to the Utility panel. This provided space for the new "CEC" button. (I've also tried to rearrange the buttons a bit, to push the more esoteric ones to the left side of the panel. Dunno if that helps or not.)

And, I've gone ahead and squeezed another row of buttons onto the poor Utility panel. This has allowed me to add "Guide" and "Zoom", along with the new "Energy" button (for Energy Savings). I've also added "Favorite" to this panel, in the hope that it fits here.

I've attached some screenshots of the two new panel layouts below.

I've got the CEC key available for some LG, Sony, and Samsung keysets, and the energy savings key for some LG and Samsung TVs. I'll hopefully be able to get support to more keysets soon.

Also in this update, I've added a couple of Sony car stereo keysets, and a Dell projector.

Last but not least, please do be wary of bugs with this update. (In particular, I don't have access to a TV with CEC or energy saver controls, nor a car stereo that can be controlled by remote, nor a projector of any sort. So yeah, I pretty much lack the ability to test any of this. :) ) Thanks!

Re: [Announce] Pierogi - a universal infrared remote control app
 

Any option for donate you for this wonderfull project?

Re: [Announce] Pierogi - a universal infrared remote control app
 

Why, thank you for asking! :) If folks are interested in donating (and, in so doing, giving me yet another push to get more work done), I do in fact have a Paypal account set up for Pierogi donations:

https://www.paypal.com/cgi-bin/websc...=K697WUWYDLNJA

All funds received through this link are dedicated towards further development of the Pierogi app. (Or, to be honest, right now they'd be used for covering past investments; the cost of the N900 I bought for development work a while back was greater than the sum of all the donations I've received so far... :) ) Thanks!

Re: [Announce] Pierogi - a universal infrared remote control app
 

the projector in question is dell 1210s
thanx for the superfast update
i am yet to check new version
thanx

Re: [Announce] Pierogi - a universal infrared remote control app
 

Hi Copernicus do you think it would be possible to add to Pierogi the codes for Fujitsu air conditioners?

Re: [Announce] Pierogi - a universal infrared remote control app
 

Well, hmm. As normal, my usual sources are pretty scant on A/C remote protocols. However, I see that there is a new kid on the block! There is a product called AnalysIR, which people have apparently been using recently to do more advanced reverse-engineering of IR signals, including A/C signals. One user has already analyzed the Panasonic A/C signal; I'll see if I can dig through their forum a bit and find if a Fujitsu has been analyzed yet...

Re: [Announce] Pierogi - a universal infrared remote control app
 

Thanks! I've found these links, perhaps this info could be useful?

http://files.remotecentral.com/libra...tsu/index.html

https://www.remotecentral.com/cgi-bi...hread.cgi?4894

Re: [Announce] Pierogi - a universal infrared remote control app
 

Egads! I've been kind of down on the RemoteCentral site for years now, as I never seem to find any good config file info there (or, at least, nothing that hasn't already been posted elsewhere). But yeah, there's an absolutely beautiful description of the Fujitsu protocol under one of the links you gave me:

http://old.ercoupe.com/audio/FujitsuIR.pdf

Someone put some real effort into that, and quite a long time ago, too. I guess I should try to mine that site a little harder. :) Let me see how much effort it would take to get this into Pierogi; it'll need to use a stateful UI, so it may take me a little time to get it up and running...

Thanks!