maemo.org - Talk
Page 14 of 19 « First 41213 14 1516 Last »
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   Applications (https://talk.maemo.org/forumdisplay.php?f=41)
-   -   [SFOS] [Announcement] Native call recorder available now (https://talk.maemo.org/showthread.php?t=94089)

coderus 2016-10-05 12:51
Re: [Announcement] Native call recorder available now
 
harbour-callrecorder-0.7.1-3.armv7hl compiled for 2.0.4: https://coderus.openrepos.net/jolla/...-3.armv7hl.rpm

TMavica 2016-10-05 13:26
Re: [Announcement] Native call recorder available now
 
brillant!！！！

pichlo 2016-10-05 13:39
Re: [Announcement] Native call recorder available now
 
Is Call Recorder supposed to not work? I have updated SFOS to 2.0.4 and Call Recorder continues working without me doing anything else.

TMavica 2016-10-05 13:54
Re: [Announcement] Native call recorder available now
 
Quote:
Originally Posted by pichlo (Post 1516174)
Is Call Recorder supposed to not work? I have updated SFOS to 2.0.4 and Call Recorder continues working without me doing anything else.
If you installed 0.713 before update, after update it will gone

pichlo 2016-10-05 14:11
Re: [Announcement] Native call recorder available now
 
I have 0.6.2.

Schturman 2016-10-14 18:14
Re: [Announcement] Native call recorder available now
 
Quote:
Originally Posted by coderus (Post 1516162)
harbour-callrecorder-0.7.1-3.armv7hl compiled for 2.0.4: https://coderus.openrepos.net/jolla/...-3.armv7hl.rpm
Hi, Coderus.
I have a problem with this version. The harbour-callrecorderd.service always crash when I press on "End Call" and of course it not show me message about save or not (Jolla C v2.0.4.13):
Code:
[root@Jolla_C ~]# systemctl-user status harbour-callrecorderd
harbour-callrecorderd.service - Call Recorder Daemon
  Loaded: loaded (/usr/lib/systemd/user/harbour-callrecorderd.service; enabled)
  Active: activating (auto-restart) (Result: signal) since Fri 2016-10-14 21:05                                                            :04 IDT; 10s ago
  Process: 22590 ExecStart=/usr/bin/harbour-callrecorderd (code=killed, signal=S                                                            EGV)
  Process: 22586 ExecStartPre=/usr/bin/harbour-callrecorderd-pre.sh (code=exited                                                            , status=0/SUCCESS)
 Main PID: 22590 (code=killed, signal=SEGV)

[root@Jolla_C ~]#
It possible to fix ? For now going back to 0.6.2...

coderus 2016-10-14 18:27
Re: [Announcement] Native call recorder available now
 
address your issue please to dpurgin

Schturman 2016-10-14 22:41
Re: [Announcement] Native call recorder available now
 
Quote:
Originally Posted by coderus (Post 1516739)
address your issue please to dpurgin
Thanks, I sent him email.

stefanmohl 2016-10-25 13:30
Re: [Announcement] Native call recorder available now
 
I discovered an interesting detail on my Fairphone2. When using call recorder, my own voice is recorded load and clear, but the remote partner has very low recording level. However, if I place the call on hold, then unhold the call, both our volume levels are great!

juiceme 2016-10-25 16:30
Re: [Announcement] Native call recorder available now
 
Quote:
Originally Posted by stefanmohl (Post 1517381)
I discovered an interesting detail on my Fairphone2. When using call recorder, my own voice is recorded load and clear, but the remote partner has very low recording level. However, if I place the call on hold, then unhold the call, both our volume levels are great!
Most probably some glitch in pulseaudio. It seems PA is not that easy thing to get right in the ported devices, I myself had issues on Hammerhead; otherwice normally working calls but recording (which works by adding a voicecall-record profile to PA) caused PA to crash and burn.


All times are GMT. The time now is 16:23.
Page 14 of 19 « First 41213 14 1516 Last »
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8