maemo.org - Talk
Page 14 of 19 « First 41213 14 1516 Last »
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   Applications (https://talk.maemo.org/forumdisplay.php?f=41)
-   -   Pybattery - battery statusbar applet with candies (https://talk.maemo.org/showthread.php?t=24905)

DaSilva 2010-08-21 15:56
Re: Pybattery - battery statusbar applet with candies
 
I can translate it to German.
Are you using Transifex? Transifex mobile is very convenient on the N900 ;)

extendedping 2010-08-21 16:00
Re: Pybattery - battery statusbar applet with candies
 
Without reading all 400 posts...before I install...

1) this will replace the green bar in the upper left correct?

2) it will have a more accurate reading of the battery life (the default seems kind of clueless). I do have battery graph installed, will it pull its info from that source?

3) is there any way for it to display the percent as well as the candle in the upper left? or will I have to click on the icon to see that...

thanks.

412b 2010-08-22 14:04
Re: Pybattery - battery statusbar applet with candies
 
Quote:
Originally Posted by extendedping (Post 794092)
Without reading all 400 posts...before I install...

1) this will replace the green bar in the upper left correct?

2) it will have a more accurate reading of the battery life (the default seems kind of clueless). I do have battery graph installed, will it pull its info from that source?

3) is there any way for it to display the percent as well as the candle in the upper left? or will I have to click on the icon to see that...

thanks.
1) yes
2) no, there is no sense in using it.
3) no at the moment, so you'll have ti click.

412b 2010-08-22 14:06
Re: Pybattery - battery statusbar applet with candies
 
Quote:
Originally Posted by DaSilva (Post 794088)
I can translate it to German.
Are you using Transifex? Transifex mobile is very convenient on the N900 ;)
Just l10n :)
All you need is to handle with .po files.

extendedping 2010-08-23 05:25
Re: Pybattery - battery statusbar applet with candies
 
Quote:
Originally Posted by 412b (Post 794958)
1) yes
2) no, there is no sense in using it.
3) no at the moment, so you'll have ti click.
as to point 2 I did install the app and it seems in sync with the battery graph readings. so it seems to me the default nokia candle was pretty out of touch and both battery graph and this app are much better. my question is, is it ok for me to remove battery graph and use this app alone instead? or will removing battery graph make pybattery give unrelyable readings?

412b 2010-08-23 06:47
Re: Pybattery - battery statusbar applet with candies
 
Quote:
Originally Posted by extendedping (Post 795461)
as to point 2 I did install the app and it seems in sync with the battery graph readings. so it seems to me the default nokia candle was pretty out of touch and both battery graph and this app are much better. my question is, is it ok for me to remove battery graph and use this app alone instead? or will removing battery graph make pybattery give unrelyable readings?
It's ok and removing won't change anything for AP.

CasTTeLLo 2010-08-23 07:08
Re: Pybattery - battery statusbar applet with candies
 
i think u should edit the thread title...coz it's a little bit confuse....thanks anyway...

412b 2010-08-23 09:23
Re: Pybattery - battery statusbar applet with candies
 
Quote:
Originally Posted by CasTTeLLo (Post 795521)
i think u should edit the thread title...coz it's a little bit confuse....thanks anyway...
if nothing changed, still only moders can do that.

412b 2010-08-23 16:01
Re: Pybattery - battery statusbar applet with candies
 
Latest builds of AP, APM and Advanced Power Common promoted to testing.

DaSilva 2010-08-23 17:12
Re: Pybattery - battery statusbar applet with candies
 
Quote:
Originally Posted by 412b (Post 794962)
Just l10n :)
All you need is to handle with .po files.
Where can I get an English .po file to translate it?

412b 2010-08-24 13:43
Re: Pybattery - battery statusbar applet with candies
 
Quote:
Originally Posted by DaSilva (Post 796057)
Where can I get an English .po file to translate it?
I will attach it this evening to the thread's first post.

412b 2010-08-24 22:38
Re: Pybattery - battery statusbar applet with candies
 
Added advanced-power.po file to the first post.

snookh 2010-08-25 00:05
Re: Pybattery - battery statusbar applet with candies
 
1 Attachment(s)
Here's my contribution in swedish.
I hope you don't mind me posting it here but there is no option to attach files in pm:s..

412b 2010-08-25 00:46
Re: Pybattery - battery statusbar applet with candies
 
forgot to mention: you don't need to replace the english strings, just fill in the gaps :)
and if desired add your credits.

CasTTeLLo 2010-08-25 00:55
Re: Pybattery - battery statusbar applet with candies
 
Quote:
Originally Posted by 412b (Post 795607)
if nothing changed, still only moders can do that.
then ask them to change....:D:D

snookh 2010-08-25 07:04
Re: Pybattery - battery statusbar applet with candies
 
Oups, guess I messed it up then and replaced the english text, maybe you still can use the info :o
To my defence it was about 3 AM at the time :rolleyes:

DaSilva 2010-08-25 07:23
Re: Pybattery - battery statusbar applet with candies
 
1 Attachment(s)
Here is the German translation.
i hope that everything is okay.

fw190 2010-08-25 07:55
Re: Pybattery - battery statusbar applet with candies
 
I ca translate it into Polish but I don't know how to do it.

WhiteWolf 2010-08-25 11:26
Re: Pybattery - battery statusbar applet with candies
 
1 Attachment(s)
Here is the Spanish translation.

WhiteWolf 2010-08-25 11:30
Re: Pybattery - battery statusbar applet with candies
 
He shows abnormal values

Time left: 4:0 / 163:00

163:00?

haj 2010-08-25 11:43
Re: Pybattery - battery statusbar applet with candies
 
1 Attachment(s)
Danish translation..

I'm not quite sure this is UTF-8... Actually I'm quite sure it's ISO-8859-1..

412b 2010-08-25 12:46
Re: Pybattery - battery statusbar applet with candies
 
Quote:
Originally Posted by WhiteWolf (Post 797755)
He shows abnormal values

Time left: 4:0 / 163:00

163:00?
There should be 4:00...
First value is time left active, second - time left idle. Perhaps, I should change "/" to "," to avoid confusion.

zimon 2010-08-25 12:50
Re: Pybattery - battery statusbar applet with candies
 
The first post could have screenshots what it looks like having APM.

I installed (advanced-power-monitor) to N900, rebooted, but cannot see any difference. BatteryGraph is working normally and I have kernel-power.
(I've read only the first post and couple of the last pages.)

412b 2010-08-25 12:51
Re: Pybattery - battery statusbar applet with candies
 
Quote:
Originally Posted by zimon (Post 797847)
The first post could have screenshots what it looks like having APM.

I installed (advanced-power-monitor) to N900, rebooted, but cannot see any difference. BatteryGraph is working normally and I have kernel-power.
(I've read only the first post and couple of the last pages.)
Install advanced-power. There are screenshots some pages before...

412b 2010-08-25 13:21
Re: Pybattery - battery statusbar applet with candies
 
Quote:
Originally Posted by haj (Post 797771)
Danish translation..

I'm not quite sure this is UTF-8... Actually I'm quite sure it's ISO-8859-1..
Unfortunatelly, I can't get some symbols ((( Please try to edit it in utf-8.

Spanish locale is to move to autobuilder.

WhiteWolf 2010-08-25 14:13
Re: Pybattery - battery statusbar applet with candies
 
Quote:
Originally Posted by 412b (Post 797840)
There should be 4:00...
First value is time left active, second - time left idle. Perhaps, I should change "/" to "," to avoid confusion.
The confusion is mine, not that meant was 163:00.

I think it's better "/" to "."

Thank you all for enhancing the experience with the N900

snookh 2010-08-25 20:18
Re: Pybattery - battery statusbar applet with candies
 
1 Attachment(s)
Uploaded a new translation file, this one in UTF-8 format for all the special chars, hope it works better.

412b 2010-08-26 10:45
Re: Pybattery - battery statusbar applet with candies
 
Quote:
Originally Posted by snookh (Post 798297)
Uploaded a new translation file, this one in UTF-8 format for all the special chars, hope it works better.
What was with the previous?

snookh 2010-08-27 21:35
Re: Pybattery - battery statusbar applet with candies
 
Quote:
Originally Posted by 412b (Post 798908)
What was with the previous?
It was ISO-8859-1 and I thought u might not see all the special chars as with the danish one.

Dr.MZ 2010-08-28 19:25
Re: Pybattery - battery statusbar applet with candies
 
I would prefer an individual adjustment possibility. For example, I would be interested only display a percentage next to the graphical battery indicator. So I would like to display the time left for active and idle time left off.

I also think it would be even if the display has the background like the normal display. (As well as the volume indicator)

Is it possible to create?

Fencer Darkwind 2010-08-28 21:27
Re: Pybattery - battery statusbar applet with candies
 
Is this stable enough for Fremantle?

tho 2010-08-30 17:28
Re: Pybattery - battery statusbar applet with candies
 
Quote:
Originally Posted by Fencer Darkwind (Post 800977)
Is this stable enough for Fremantle?
I installed APM a couple of days ago on my N900, so far there have not been any ill-effects.

bitrocky 2010-09-02 16:55
Re: Pybattery - battery statusbar applet with candies
 
hi 412b,

how about adding the temperture of the batterie after the percent?

like this f.e. Akku: 26.9% (31°C)

koivjann 2010-09-02 17:42
Re: Pybattery - battery statusbar applet with candies
 
1 Attachment(s)
Here is finnish translation, if you haven't it yet

Now in UTF-8

412b 2010-09-03 09:16
Re: Pybattery - battery statusbar applet with candies
 
Quote:
Originally Posted by bitrocky (Post 805428)
hi 412b,

how about adding the temperture of the batterie after the percent?

like this f.e. Akku: 26.9% (31°C)
Unfortunatelly, there is no info about battery temperature available or I missed it.

Bringing functionality from OS2008 to Maemo5 version is next step, the main thing to consider is representation of info, getting it is already done.

zimon 2010-09-05 18:03
Re: Pybattery - battery statusbar applet with candies
 
This may have been asked before, but not going to read 56 pages.

Is it possible to get pybattery to show voltage instead of capacity?

With Mugen 2400 mAh battery, the charge-levels are always wrong, but the voltage meter works (for example with BatteryGraph).
It would be usefull, if pybattery would show 100% and "4.2V", and linearly 0% at "3.6V".

So the pybattery optionally would show Battery chargelevel as:
(VOLTAGE - 3.6V) / (4.2V - 3.6V) * 100%
[Maybe min level 3.6 could be configurable.]

412b 2010-09-05 19:25
Re: Pybattery - battery statusbar applet with candies
 
Quote:
Originally Posted by zimon (Post 808015)
This may have been asked before, but not going to read 56 pages.

Is it possible to get pybattery to show voltage instead of capacity?

With Mugen 2400 mAh battery, the charge-levels are always wrong, but the voltage meter works (for example with BatteryGraph).
It would be usefull, if pybattery would show 100% and "4.2V", and linearly 0% at "3.6V".

So the pybattery optionally would show Battery chargelevel as:
(VOLTAGE - 3.6V) / (4.2V - 3.6V) * 100%
[Maybe min level 3.6 could be configurable.]
I'll take a look, what could be done.

nerfiaux 2010-09-06 14:19
Re: Pybattery - battery statusbar applet with candies
 
I also have mugen Battery, and I would really like to have a correct power status.
Please, make it available and if you need tester feel free to ask.

Thanks.

James_Littler 2010-09-16 20:59
Re: Pybattery - battery statusbar applet with candies
 
Is there any way to remove the bg from the status menu item?

Currently it looks like a button but pressing it does nothing but exit the status menu (gracefully).

It would be great if it could have the same bg (ie no bg) same as the standard one (especially seeing as it's next to the volume control which doesn't have this button appearance).

Cheers

412b 2010-09-17 11:25
Re: Pybattery - battery statusbar applet with candies
 
Quote:
Originally Posted by James_Littler (Post 818320)
Is there any way to remove the bg from the status menu item?

Currently it looks like a button but pressing it does nothing but exit the status menu (gracefully).

It would be great if it could have the same bg (ie no bg) same as the standard one (especially seeing as it's next to the volume control which doesn't have this button appearance).

Cheers
Settings are not in the main tree, so, as soon as it will be stable enough, button will lead you to Settings dialog.


All times are GMT. The time now is 20:52.
Page 14 of 19 « First 41213 14 1516 Last »
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8