maemo.org - Talk - overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.7]

Page 14 of 33

« First

< Prev

Next >

Last »

Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)

- Nokia N9 / N950 (https://talk.maemo.org/forumdisplay.php?f=51)

- - overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.7] (https://talk.maemo.org/showthread.php?t=83357)

Dragoss91

2012-05-01 19:54

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.2] [ui v1.0]

Quote:

Originally Posted by Arie (Post 1200071)

I keep sr on. At the voltage you are at and the mhz, the only problem I encountered was the N9 heated up too quickly. I wasn't comfortable with melting my chipset, so I brought the clock down to 1100mhz at stock voltage and things worked out.

How long have you been using that match up?

Around 2 weeks so far , still using .

Arie	2012-05-01 19:59

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.2] [ui v1.0]

Quote:

Originally Posted by Dragoss91 (Post 1200397)

Around 2 weeks so far , still using .

What is battery life like?

eerde

2012-05-01 20:50

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.2] [ui v1.0]

Great app, nice functional GUI !
I am running it @1200MHz and 1375000. Works for me :) THX

OK I'd like to donate/pay Creamy Goodness & Co. for the app, but what is "Bon-ton" $ 2, 3, 5 ... Wow maybe even real money like in Euro's ? ;)

Timpaxi

2012-05-01 21:23

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.2] [ui v1.0]

[QUOTE=Arie;1200040]
I don't see above 28 degrees ever. Even when I was overclocked over 1300mhz.[/QUOTE

Well, what am i doing wrong then..?? Mine's going with 1200mhz and 1275000. Too low voltage?

Arie	2012-05-01 23:08

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.2] [ui v1.0]

[QUOTE=Timpaxi;1200457]

Quote:

Originally Posted by Arie (Post 1200040)

I don't see above 28 degrees ever. Even when I was overclocked over 1300mhz.[/QUOTE

Well, what am i doing wrong then..?? Mine's going with 1200mhz and 1275000. Too low voltage?

Nothing at all, depends on your chipset.

JjyKs

2012-05-01 23:21

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.2] [ui v1.0]

I have been running 1350Mhz without any voltage tweaks for 1week.
I used your old version which required opensh etc. Now i downloaded your GUI version and it's very nice. However now i realized that my phone can go up to 1400mhz with little added voltage, and it's completely stable atleast in PS1 emulation with Emumaster.

However i still can't run some games at stable 60fps (bouncing at 50-57), so can you please add ability to overclock further than 1400mhz, or tell me the commands again to do it from opensh :p

Rogatti

2012-05-02 00:11

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.2] [ui v1.0]

Quote:

Originally Posted by JjyKs (Post 1200515)

50-57), so can you please add ability to overclock further than 1400mhz, or tell me the commands again to do it from opensh :p

-
-
opensh
/usr/sbin/aegisctl -k
/sbin/insmod /lib/modules/2.6.32.48-dfl61-20115101/symsearch.ko
/sbin/insmod /lib/modules/2.6.32.48-dfl61-20115101/opptimizer.ko
echo 0 > /sys/power/sr_vdd1_autocomp
echo 0 > /sys/power/sr_vdd2_autocomp
echo 1450000000 1387500 > /proc/opptimizer
echo 75 > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold

Rogatti

2012-05-02 00:21

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.2] [ui v1.0]

I am running (heavy) .. 1.3GHz /1350000 and using FasterN9 ( http://talk.maemo.org/showthread.php?t=83940 ) ... Low battery consumption.. Great !!:D

itsnotabigtruck

2012-05-02 01:26

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.2] [ui v1.0]

Quote:

Originally Posted by Rogatti (Post 1200528)

FYI, the first 4 steps can be replaced with:

devel-su
/opt/opptimizer/bin/oppldr

The second command is a utility I wrote to automatically load the OPPtimizer modules, taking care of Aegis (this is what the GUI uses)

Makeclick

2012-05-02 08:48

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.2] [ui v1.0]

So.. Is there different at the 16GB or 64GB version?
My 64 working very good and not warming at all in 1300MHz/1337500 voltage. I use Faster N9 too. It is awesome! I don't even wait PR1.3 anymore :D

Rogatti

2012-05-02 16:25

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.2] [ui v1.0]

My n9 at 1.3GHz / 1350000, restarted .. had several windows open FireFox ... increased the voltage to 1375000 ... testing.

Fluca

2012-05-02 16:33

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.2] [ui v1.0]

Thanks for this app.

It has made my phone respond sensibly faster and crispier to commands.

Also, it has been working flawlessly for 4 days now (at 1160 MHz/1250000). Would've liked to reach 1200 MHz, but the phone reboots instantly, be it at 1250000 be it at max voltage :(

Just donated (hugg) what I have judged a fair amount taking into consideration the work done and your willingness to share it's source.

Keep at it!

Timpaxi

2012-05-02 21:11

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.2] [ui v1.0]

[QUOTE=Arie;1200503]

Quote:

Originally Posted by Timpaxi (Post 1200457)

Nothing at all, depends on your chipset.

Well, in what temperature i should be worried? Over 35?

Creamy Goodness

2012-05-02 21:45

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.2] [ui v1.0]

you guys are looking at the battery temperature, it barely matters.

Dragoss91

2012-05-02 21:52

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.2] [ui v1.0]

Quote:

Originally Posted by Rogatti (Post 1200528)

lol , do your device reach 1.45ghz with 1387500 microvolts ? some people are lucky , more potent devices .

Rogatti

2012-05-02 23:23

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.2] [ui v1.0]

Quote:

Originally Posted by Dragoss91 (Post 1201022)

lol , do your device reach 1.45ghz with 1387500 microvolts ? some people are lucky , more potent devices .

-
-
got it .. now is the fear of the next day he refuses to "wake up" ... lol..
-
now running 1.25GHz /1300000... I and my battery happy ....running CAS wxMaxima :D
-
ps... I think high voltage for long time...very bad.

jleholeho

2012-05-03 01:12

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.2] [ui v1.0]

my N9 working flawlessly at 1325 MHz, voltage 1375000 so far...no reboots or anything...
though I can't say it's a super-boost change, I'm definitely seeing some improvement (the phone was pretty fast before, too)
scrolling in feeds and opening some apps is obviously faster...
THX Creamy Goodness

Timpaxi

2012-05-03 07:20

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.2] [ui v1.0]

Quote:

Originally Posted by Creamy Goodness (Post 1201019)

you guys are looking at the battery temperature, it barely matters.

Ok, how do i know then when this goes too warm? Ai mean prosessor. Phones back is little warm when using contiously..
And my phone smells a bit from 3.5mm blughole. Well, it has always smelled but still.. :)

ibrakalifa

2012-05-03 07:32

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.0.1]

1,375 now, seems stable

ADRENALINE

2012-05-03 08:01

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.0.1]

when installing new version we can we upgrade or its mandatory to remove previous versions ??

Timpaxi

2012-05-03 08:04

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.2] [ui v1.0]

Quote:

Originally Posted by Creamy Goodness (Post 1199253)

conky, there is a link in my signature

There is something wrong with my conky.. Not showing whole screen and background. i tried that fastern9 mod and after that conky went bad. I unistalled fastern9 and reinstalled conky but no effect.

ibrakalifa

2012-05-03 08:11

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.0.1]

Quote:

Originally Posted by ADRENALINE (Post 1201168)

when installing new version we can we upgrade or its mandatory to remove previous versions ??

upgrade it, doesnt need to remove previous version

jleholeho

2012-05-03 08:53

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.0.1]

Quote:

Originally Posted by ibrakalifa (Post 1201156)

1,375 now, seems stable

what voltage?

ssjmec

2012-05-03 10:09

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.0.1]

I have a question, when I am not using the UI opptimizer, I can get up to 1.3Ghz with no provided voltage (thus, as I remember, will automatically voltage up to 13750000? correct me if im wrong) nonetheless, without touching voltage and sr before I do not get instant reboot. But with the UI, setting it to 1.3Ghz and not touching voltage and sr instantly freezes my phone plus a reboot. Why?

ibrakalifa

2012-05-03 10:11

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.0.1]

Quote:

Originally Posted by jleholeho (Post 1201187)

what voltage?

still 1375000 sir

Creamy Goodness

2012-05-03 17:39

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.0.1]

Quote:

Originally Posted by ssjmec (Post 1201216)

??? Enter the voltage you want in the UI. It's not going to guess for you.

Quote:

Originally Posted by Timpaxi (Post 1201169)

There is something wrong with my conky.. Not showing whole screen and background. i tried that fastern9 mod and after that conky went bad. I unistalled fastern9 and reinstalled conky but no effect.

swipe it away and then go back to it. works now?

Timpaxi

2012-05-03 21:13

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.2] [ui v1.0]

Quote:

Originally Posted by Timpaxi (Post 1201150)

Well? What should be prosessors temp, and when it's too warm..

Timpaxi

2012-05-03 21:14

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.0.1]

Quote:

Originally Posted by Creamy Goodness (Post 1201452)

??? Enter the voltage you want in the UI. It's not going to guess for you.

swipe it away and then go back to it. works now?

Yeah, got it working earlier. :)

Creamy Goodness

2012-05-03 21:34

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.2] [ui v1.0]

Quote:

Originally Posted by Timpaxi (Post 1201560)

Well? What should be prosessors temp, and when it's too warm..

We can't measure the processor's temperature, and we don't know what the thermal budget is for the processor, so there is no way to answer that question.

Arie	2012-05-03 22:14

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.0.1]

Quote:

Originally Posted by Creamy Goodness (Post 1201452)

??? Enter the voltage you want in the UI. It's not going to guess for you.

Whaaaaaaaaaat?!?!?!?!? It's not gonna guess for me? I want my money back, not coool. Creamy Goodness, I feel cheated out of my free app purchase.

Creamy Goodness

2012-05-03 22:39

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.0.1]

I'm sorry you feel that way Arie. I have processed your $0.00 refund, but there is a refund fee of 50 cents so now you owe me 50 cents.
I figured out how to read the temperature from the CPU directly, it's not exactly easy. Maybe I can do it but no guarantees. It looks like the max temperature is over 100 degrees (celsius), somewhere in the 125 - 160 degree range.

Quote:

13.4.6.2 Temperature Sensor
The temperature sensor feature is used to convert the temperature of the device into a decimal value
coded on 7 bits. An internal ADC (realized with a resistor array) is used for conversion. The recommended
operating temperatures must be from –40 to 125°C for standard conversion, and can go up to 160°C
when using the thermal shutdown comparator output (TSHUT signal). This signal indicates a too high
temperature of the device. This signal is internally connected to a general purpose input/output (GPIO)
pin. See Chapter 25, General-Purpose Interface, for more information.
The temperature sensor offers two operating modes: a single conversion mode and a continuous
conversion mode.

That's the non-technical part.

Quote:

13.4.6.2.1 Single Conversion Mode (CONTCONV = 0)
When the ADC is idle (EOCZ = 0), it is possible to ask for a single temperature conversion. To initiate a
new conversion, the start of conversion (SOC) signal must be asserted and maintained high until the end
of conversion (EOCZ) signal goes high, after which the SOC must be made low by writing 0 to the
CONTROL.CONTROL_TEMP_SENSOR[9] SOC bit. Conversion completion is indicated by a negative
edge on EOCZ (CONTROL.CONTROL_TEMP_SENSOR[8] EOCZ bit).

There's a nice diagram showing how many cycles to wait...
Problem is I don't have the correct documentation for our OMAP 3630 so I am not sure if the memory address of the temp sensor in our kernel is correct. Worth a shot, I guess.

itsnotabigtruck

2012-05-03 23:05

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.0.1]

Quote:

Originally Posted by ssjmec (Post 1201216)

The GUI doesn't automatically boost the voltage (and I'm not sure the current version of the modules does either) - dial it into the voltage you want and set it to that.

Note that you should make sure to set the voltage to the absolute lowest stable value for the clock speed you want. High voltages cause electromigration in the chip (= shorter device lifetime), high heat output (= overly toasty phone), and high power consumption (= low battery life). You'll need to incrementally lower the voltage and run a stress test until it starts crashing, at which point it should be raised to the last stable value.

asianmoomoo

2012-05-04 03:15

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.0.1]

noob question:

I installed inception. I activated inception. I download both the kernel and the 2nd link for the overclocking.

My question is: how do I use inception to allow me to use the overclocking? I opened the overclocking app and when i check to show raw output, it shows no file or direction. what to do?

i am so close i can almost taste it...

Creamy Goodness

2012-05-04 03:18

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.0.1]

haha your name is interesting...
if you installed inception properly, you ran the pasiv command already
now install those .deb files properly like it says in the first post.
Install in this order!
(change to the directory you saved the files)
/usr/sbin/incept opptimizer_1.5.3_armel.deb
/usr/sbin/incept opptimizer-ui_1.0.1_armel.deb

what's the problem?

Creamy Goodness

2012-05-04 03:20

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.0.1]

btw, check this out, the thing to read the temperature from the cpu is already on the phone:
opensh
modprobe omap34xx_temp
cat /sys/devices/platform/omap34xx_temp/temp1_input
Doesn't work very good though. It seems to stop working after a few times for me.

asianmoomoo

2012-05-04 03:41

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.0.1]

hey Creamy Goodness,

Couple of questions:

1. I believe I did the pasiv command already..do i need to run this everytime i need to incept something or restart the phone?

2. I think the issue is i do not know where I download the the 2 overclocking files to. Is there a way to find out? I use filebox and when i go to the usr -> sbin, i do not see the 2 files.

Thanks!

Creamy Goodness

2012-05-04 03:44

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.0.1]

1) no, some people forget that and it won't work for them, I am just making sure you didn't forget
2) i suggest copy the files to /home/user/MyDocs, this is the folder that becomes mounted if you connect the computer to your phone with usb mass storage. That way you don't have to use the phone to download them.
Whatever folder doesn't matter, just change to the folder before trying to run the next commands. /usr/sbin/incept is the command you are running, the name of the debian file is telling it what to install.

asianmoomoo

2012-05-04 04:22

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.0.1]

i copied both files to the documents folder. i tried to copy the folder into the "bin" folder and the phone said i do not have permission to proceed. (all within filebox app).

this is what i have on my phone and the steps im doing it:

1. I already got my phone activated for inception
2. I have both overlock file and the UI file in "My documents" folder within my phone
3. I cannot copy the files to anywhere else within the phone
4. When I open terminal to type command, I type, /usr/sbin/incept
5. Then it asks me what file to incept
6. I then type, opptimizer_1.5.2_armel.deb
7. Then it says not Not Found

what might be the issue?

asianmoomoo

2012-05-04 04:27

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.0.1]

*btw, i know im a total noob and i apologize in advance for asking probably the dumbest question. And thanks for your time

Creamy Goodness

2012-05-04 04:29

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.0.1]

type cd /home/user/MyDocs first
then /usr/sbin/incept filename.deb all on one line

All times are GMT. The time now is 18:23.

Page 14 of 33

Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8