Re: Announce: USB Mode (easy switch to USB host mode)
 

Lithium tech batteries actualy are longest lived when kept(opinion varies on %) between 50% and 80% charging and discharging out of these bounds causes wear on the electrodes in the battery.
Even with the old nickel-cadmium and nickel-metal-hydride cells memory effect was more of an urban myth blame when encountering worn out cells for average users.
https://en.wikipedia.org/wiki/Memory_effect

Re: Announce: USB Mode (easy switch to USB host mode)
 

Actually, I wasn't speaking of the memory effect which is indeed controversal.

Just the fact it's not recommanded to let a Li-ion battery charging while it's already at 100% charge.

Re: Announce: USB Mode (easy switch to USB host mode)
 

Is CSSU indeed optional in version 1.0-3 as stated on the first page?

I installed power kernel, mceledpattern but no CSSU. Usbmode installed without problems but after trying switching the mode, it complains:

"You need to update your Maemo 5 system to last Community SSU version".

and

"Error: Setting USB mode is not supported".

I'd rather not install full CSSU with current problems with repositories. Is there a workaround?

I also tried h-e-n and it works but erratically. It recognizes only some devices and only after fresh reboot.

Re: Announce: USB Mode (easy switch to USB host mode)
 

@memorer: Now I updated 1.0-3 version. Update it from first post (same link) and try again.

Re: Announce: USB Mode (easy switch to USB host mode)
 

No change. The same error.

I've made a workaround myself, though, by commenting checking for ke-recv in usbmode.sh.

Now it works correctly but, similarly to h-e-n, only freshly after reboot. After changing to normal mode and trying to connect the USB device again, the USB mode can't settle for the mode and exits with an error. Rebooting the phone is very inconvenient but I'm happy it works at all.

Re: Announce: USB Mode (easy switch to USB host mode)
 

I forgot to remove ke-recv check in usbmode.sh. Now I updated deb package - it should be fixed now.

Re: Announce: USB Mode (easy switch to USB host mode)
 

I second this, although not for N900's battery life reasons. Being able to connect in peripherial without charging would aid *a lot*, when using N900 as 3G modem for notebook, via USB cable. Usually, batteries in laptops, while doing active networking, won't last even remotely as long, as N900 battery (especially, the dual one). Thus, in such situations, one doesn't want N900 to hijack power from notebook battery.

Phones able to provide network via USB cable without pulling power from same connection, are very appreciated. No reason, why we shouldn't have this possibility, if it's doable.

/Estel

Re: Announce: USB Mode (easy switch to USB host mode)
 

Yes. Fixed. Thanks.

Re: Announce: USB Mode (easy switch to USB host mode)
 

After update deb package ok installation. I have a read only flash-drive, but when I want a read a hard disk HD I get a "unable to connect:no filesystem available" ..... please I need help

Re: Announce: USB Mode (easy switch to USB host mode)
 

@emotion: do you have enought power for your HDD? Also try to use H-E-N (reboot before using) and wait more seconds between enumerate and vbus. Also not all USB devices working with n900...