maemo.org - Talk - Introducing ubiboot N9 (multiboot OS loader)

Code:
# Original version is based on the MOSLO kernel & boot OS.

#

G_UBIBOOT_VERSION="0.2.0"



# Enable timeout for the main boot menu. If this is set to 0 then we will wait forever

# for user interaction in the menu... propably not a wise selection.

# If timeout is specified and reached, the default OS & kernel are booted.

#

G_MENU_TIMEOUT=1



# Exported partitions if USB is connected.

# Even if you set this to (none), you can export these manually when you telnet to the device.

# Exporting them all is handy for backup purposes as you can then tar off everything on a partition

# to external computer. Note that windows computers cannot normally mount ext2 partitions...

# This could be thought as a minor security breach, but then again, same thing can always be accomplished

# using flasher and maintanace boot so I do not see this as an additional high risk...

#

G_EXPORTED_PARTITONS="/dev/mmcblk0"      # This exports all partitons of the device

#G_EXPORTED_PARTITONS="/dev/mmcblk0p1"    # this exports just the Mydocs partiton

#G_EXPORTED_PARTITONS="/dev/mmcblk0p2"    # this exports just the root partition

#G_EXPORTED_PARTITONS="/dev/mmcblk0p3"    # this exports just the home partiton                             

#G_EXPORTED_PARTITONS="/dev/mmcblk0p4"    # this exports just the nemo partition                                           

#G_EXPORTED_PARTITONS=""                  # this turns off partition exporting                             



# Start DHCP server on the USB, to give address for a host for telnet access.                      

# If this is set to 0, you must ifconfig the interface yourself to access the device.              

#                                                                                                  

G_START_DHCP_SERVER=1                                                                              



# Enable telnet server on the device.

# If the USB is connected when the device boots, no menu will be shown and instead you may login

# to the device for maintanance purposes.

# This could be thought as a minor security breach, since no password is required.

# However, same thing can always be accomplished using flasher and maintanace boot so I do not see

# this as an additional high risk...

#

G_START_TELNET_SERVER=1



# Enable SSH server on the device.

# If the USB is connected when the device boots, no menu will be shown and instead you may login                           

# to the device for maintanance purposes.                                                                                  

# This is better than telnet as you need to use the harmattan root password to login to the device.

# Hey, of course you have changed the default password from "rootme" to something else? What, not? hmmm...

# Unfortunately this is not ready yet... I need to rebuild the SSH server to not ***** about missing PAM's...

# ... hence not enabled :)

#

G_START_SSH_SERVER=0



# Now follow the bootable OS'es and kernels on the device, this is the structure of the 2nd level menu.

# Due to screen resolution issues, the maximum length of the kernel label is 30 characters.                  

# Each OS has 6 slots for kernels, but all need not be defined. The G_<osname>_NUM parameter defines

# the number of kernel lines shown on the 2nd level menu.



# Init scripts for different OS'es. Make sure that you have these in place, or else booting will fail.

# Note that you have to escape the forward slashes here as this is a substituting expression in sedscript...

G_HARMATTAN_INITSCRIPT="\/sbin\/preinit_harmattan"

G_NITDROID_INITSCRIPT="\/sbin\/preinit_nitdroid"

G_NEMO_INITSCRIPT="\/sbin\/init"



# Nitdroid kernels

G_NITDROID_NUM=1

G_NITDROID_1_LABEL="E-yes PR 1.3 kernel"

G_NITDROID_1_FILE="/boot/zImage.pr13"

G_NITDROID_2_LABEL=""

G_NITDROID_2_FILE=""

G_NITDROID_3_LABEL=""                                                                                   

G_NITDROID_3_FILE=""                                                                                    

G_NITDROID_4_LABEL=""                                                                                   

G_NITDROID_4_FILE=""                                                                                    

G_NITDROID_5_LABEL=""                                                                                   

G_NITDROID_5_FILE=""                                                                                    

G_NITDROID_6_LABEL=""                                                                                   

G_NITDROID_6_FILE=""                                                                                    



# Harmattan kernels

G_HARMATTAN_NUM=2

G_HARMATTAN_1_LABEL="E-yes PR 1.3 kernel"

G_HARMATTAN_1_FILE="/boot/zImage.pr13"

G_HARMATTAN_2_LABEL="Plain OpenMode kernel"

G_HARMATTAN_2_FILE="/boot/zImage-2.6.32.54-dfl61-20121301"

G_HARMATTAN_3_LABEL=""

G_HARMATTAN_3_FILE=""

G_HARMATTAN_4_LABEL=""                                                                                  

G_HARMATTAN_4_FILE=""                                                                                   

# G_HARMATTAN_5_LABEL="2.6.32.54-dfl61-oma"

# G_HARMATTAN_5_FILE="/boot/Harmattan/boot/zImage-2.6.32.54-dfl61-oma"

# G_HARMATTAN_6_LABEL="2.6.32.54 Nemo backport"

# G_HARMATTAN_6_FILE="/boot/Harmattan/boot/zImage-2.6.32.54-juice_backport"





# Nemo kernels

G_NEMO_NUM=2

G_NEMO_1_LABEL="Latest 2.6.32"

G_NEMO_1_FILE="/boot/Nemo/boot/bzImage"

G_NEMO_2_LABEL="Unstable 3.5.3 SabreTSq"

G_NEMO_2_FILE="/boot/Nemo/altboot/vmlinuz-3.5.3-juice"

G_NEMO_3_LABEL=""

G_NEMO_3_FILE=""

G_NEMO_4_LABEL=""                                                                                       

G_NEMO_4_FILE=""                                                                                        

G_NEMO_5_LABEL=""                                                                                       

G_NEMO_5_FILE=""                                                                                        

G_NEMO_6_LABEL=""                                                                                       

G_NEMO_6_FILE=""                                                                                        



# Default boot kernel

# If timeout is reached before user interaction this is booted

G_DEFAULT_OS="Harmattan"

G_DEFAULT_KERNEL="/boot/zImage-2.6.32.54-dfl61-20121301"