Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE and Titan power44!
 

Which one is going to be more annoying or more prone to breakage, getting you SD card in and out vs making a choice on a bootup menu?

Have you ever taking the sd card out from N900? It is like doing surgery!

bun

Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE and Titan power44!
 

Hey bun i have followed post #1 step by step but when i reboot and try to enter the power-kernel (option 2) from the multiboot menu then it freezes at the white "NOKIA" screen and shuts down after about 10 seconds. now if i switch it on the white light stays on and the screen is stuck at white "NOKIA" screen again..

I did a reflash of the kernel and it worked normally again but once i try to go into the power-kernel it does the same again!

Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE and Titan power44!
 

Just tried NITdroid today and love it. I know it has been mentioned that it eat battery life, any tips on how I can save battery life while using it?

I used "ideal" presets on the enhanced kernel, is there anything special I need to do to get similar underclocking while using NITdroid. I am really loving Android Marketplace lol

Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE and Titan power44!
 

sir, i think its about time to make a new threat since power v45 is out, nitdroid *multiboot* isnt supported with titan's kernel and how much **** can u combine in one thread?

Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE and Titan power44!
 

Multiboot works with Titan power45 kernel.

I can multiboot PR1.3, power45, Nitdroid and backupmenu and they all work.

Thanks to nitroid / multiboot team developers, Titan and RobbieThe1st.

Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE and Titan power44!
 

BOOOYA niftyyy stuff :D finally
looking forward for phone and gps and im off maemo...

Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE and Titan power45!
 

guys i booted into nitdroid and i was able to send/receive phone calls and sms and plane mode wass off i didnt do anything it just worked by itself...
is it weird or its normal?

Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE and Titan power44!
 

I have power45 installed, but have never installed Nitdroid. can I just use the autoinstaller and things will work out?

The note in the first post doesn't make much sense to me and at any rate seems oriented to people upgrading to power45 from nitdroid and not the other way around.

Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE and Titan power45!
 

it's normal

Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE and Titan power44!
 

I'm also interested for such tutorial (u-boot & power45 + Nitdroid + MeeGo).

Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE and Titan power44!
 

I also did install multiboot / Nitdroid when i had the stock PR1.2 installed.
The magic of multiboot is that i can return to the stock kernel by just rebooting with the keybord open and pressing B key.
Some days ago i had PR1.2 / Nitroid 0.0.8 and power 40 installed.
As i wanted to upgrade to PR1.3 and just to be on the safe side i installed backupmenu as a multiboot item and made a complete system backup.
After, to upgrade to PR1.3, i just booted to PR1.2 and made an OTA upgrade with no problems. Multiboot nitroid backupmenu and all my other apps were still there and working. At last i replaced the old power40 boot image and modules with version 45.

I think you can install multiboot / nitdroid with power45 installed but then if you reboot with B key you will not return to stock kernel but to power45.

Take a look at the following links that have all the info you may need:

Multiboot/Nitdroid-Autoinstaller

nitdroid forum

Install backupmenu as a multiboot item

My gratitude and credits to multiboot / nitroid developer team, Titan, RobbieThe1st, Rob1n and maemo community.

Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE and Titan power45!
 

how can i boot from stock maemo kernel? (i have 3 choice on multiboot -power45 and nitdroid work fine but i cant boot from stock maemo kernel.

Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE and Titan power45!
 

If you installed multiboot / nitdroid over stock kernel press B key or 0 (number zero) key when booting.

Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE and Titan power45!
 

i did but it says something is missed (in a red box)

Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE and Titan power45!
 

Guys I need some info. If I understand right, multiboot reflashes kernel each time we switch the OS (Maemo <--> NITdroid)? With u-boot we avoid this?

Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE and Titan power45!
 

badly need your help guys.. I have uninstalled nitroid using the nitroid-uninstaller and I am stock now on multiboot menu.. what will I do?

Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE and Titan power45!
 

Check if you have these files:

/etc/multiboot.d/00-Maemo-2.6.28-omap1.item

/boot/multiboot/vmlinuz-2.6.28-omap1

and this dir:

/lib/modules/2.6.28-omap1

Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE and Titan power45!
 

First of all thank you for your reply
i can find
/etc/multiboot.d/00-Maemo-2.6.28-omap1.item
and /lib/modules/2.6.28-omap1 but /boot/multiboot/vmlinuz-2.6.28-omap1 doesnt exist .how can i create it ?

Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE and Titan power44!
 

thanks for the info and the links, but my big concern is how the multiboot that is set up by the nitdroid autoinstaller interacts with the uboot that power45 installed. has anyone tried installing in this order (first uboot (independently or via power kernel), then multiboot via nitdroid)?

Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE and Titan power45!
 

You have to install multiboot-kernel-maemo_0.3-1_armel from:

http://repository.maemo.org/extras-d....3-1_armel.deb

It will create the maemo kernel - missing vmlinuz-2.6.28-omap1 file.

That was made for PR1.2.
It seams it still works with PR1.3 but it is not the PR1.3 kernel.

If you have PR1.3 installed you may extract the PR1.3 kernel from the bin file (credits to OptX).

Download RX-51_2009SE_20.2010.36-2_PR_COMBINED_MR0_ARM.bin
from
http://tablets-dev.nokia.com/nokia_N900.php

Download and install the latest version of the Flasher for your PC
http://tablets-dev.nokia.com/maemo-d...-downloads.php

Execute in your PC:

Rename the resulting zImage file to vmlinuz-2.6.28-omap1 and copy it to /boot/multiboot/ directory in your N900.

Good luck :)

Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE and Titan power45!
 

Hi guys. I'd just like to show my appreciation and say thank you to all who have helped on this project and to the main developers. To see what stage NITDroid it at now from the very begining you have worked very har. I'm trying to get my head around Linux atm I've always been a windows boy. Now I have Zorin on my machine I'm trying to get a bit more techy with the whole Ubuntu/Maemo. If you need anything testing with a UK phone UK PR 1.3 UK sim etc. Then let me know, thank's for the hard work.

Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE and Titan power45!
 

can any one help me???
i have installed nitdroid on n900 but its initing for about 3 hours and i didnt see the android yet its is writing to me on screen alot of thing :: like::
97884654684 request_suspend_state: wake_up at ..... blah bla h
and alot of numbers but until now i am not seeing the android from inside??
can any one tell what these numbers says
???/ please

Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE and Titan power45!
 

hello fellas.
i'm just jumping in to ask how the nitdroid process looks like?
is 0.9 coming?
any link for me?
regards

Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE and Titan power45!
 

can you help just look at the post before yours
???
pleaseeeeeeee????????

Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE and Titan power45!
 

did you use the installer?multiboot?u-boot?which kernel?overclocked?how many space on card?
more infos please

Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE and Titan power45!
 

i am using multiboot and nitdroid is on memory card when chosed nitdroid and it started to run but instead of getting in the android it is doing alot of numbers and for more than 3 hours i said lets see maybe it will stop and get into the android!! but it didnt and it still doing numbers ????? and yes i used auto installer

Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE and Titan power45!
 

guys any one can help here i will be grateful

Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE and Titan power45!
 

hmm i would try to reinstall it.check the first post for that.sry i have to go to sleep.ts near 12pm here and tomorrow is school :(

Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE and Titan power45!
 

I suspect something went wrong with Nitroid installation in your SD card as it hangs at boot.
What SD card and size do you have? I remember there are problems with some Sandisk types.
See this guide and try to reinstall.

Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE and Titan power45!
 

Sorry, but the project is still alive?

Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE and Titan power45!
 

nitdroid does not have multitasking right? or am i missing something?

soft camera key - back
hard camera key - home
lockslide - options

when i launch an app, how do i keep it running? whenever i press the home button it just exits it.

Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE and Titan power45!
 

no multitasking.
and android doesn't closes apps.
if you exit it its still running

Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE and Titan power45!
 

ohh okay thanks for clarifying that! just wondering though, our we going to see multitasking in the upcoming nitdroid? or is it impossible to implement that feature?

Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE and Titan power45!
 

Nitroid is just Android for the N900. If it isn't a feature of Android, it likely won't be possible in Nitdroid. You'd be better off asking questions like that in an Android forum.

Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE and Titan power45!
 

isn't it a feature in Android phones?

Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE and Titan power45!
 

nitdroid 0.0.9 is taking too much time. I am begining to lose hope about it or should I wait??

Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE and Titan power45!
 

there are some apps which emulate multitasking in the android market but there is nothing that is anywhere near maemo multitasking. It's the most frustrating part of android.iphone is the same.just can't do it. it's the software.

Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE and Titan power45!
 

Really quickly if any of you are having problems with to many open apps go on to the market place and download Advanced Task Killer that'll help you out with the proccesses.

Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE and Titan power45!
 

They're still miles ahead of the iCrap port. Theres still activity on the nitdroid forums, its not dead just yet.

http://www.idroidproject.org/wiki/Status

Re: Nitdroid today, auto-installer and 1st impression and 0.0.8 installation AND PR 1.3 UPGRADE and Titan power45!
 

is the nitdroid website down? It keeps giving FastGCI Error.