maemo.org - Talk - overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.7]

Page 18 of 33

« First

< Prev

Next >

Last »

Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)

- Nokia N9 / N950 (https://talk.maemo.org/forumdisplay.php?f=51)

- - overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.7] (https://talk.maemo.org/showthread.php?t=83357)

Creamy Goodness

2012-05-09 08:23

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.0.1]

okay i'm sending the beta, i am sick of fixing bugs and testing. i hope it's okay :)

ADRENALINE

2012-05-09 08:26

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.0.1]

Quote:

Originally Posted by ADRENALINE (Post 1203872)

so far so good gonna go the same freequency you have with the same voltage and will feedback
wish me luck;)

testing 1375Mhz 1375000v @ 3000 still going on for more than 2 mins
>>survived UI testing now will try it myself

ibrakalifa

2012-05-09 08:30

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.0.1]

mine last for more than a week with that settings

ADRENALINE

2012-05-09 08:33

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.0.1]

Quote:

Originally Posted by ibrakalifa (Post 1203877)

mine last for more than a week with that settings

it freezed for a min or two then it went dead i had to restart the phone myself(press the ppower for 8sec)

gues now i will go step by step shortest freq to test not less than 12hours
currently going 1250Mhz 1.3v

ibrakalifa

2012-05-09 08:36

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.0.1]

Quote:

Originally Posted by Creamy Goodness (Post 1203873)

okay i'm sending the beta, i am sick of fixing bugs and testing. i hope it's okay :)

testing right now, thx, wish me luck, :)

ps work nicely, the only one causing reboot is when revert back to the stock clock when disable custom voltage

praveenchand

2012-05-09 09:13

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.0.1]

where i can find the beta?

ibrakalifa

2012-05-09 09:23

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.0.1]

pm mr.creamy, thats it

jleholeho

2012-05-09 09:28

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.0.1]

I´ve been alright for a few days now with 1300MHz, 1362500v, SR on, seems super stable...
just wondering if upcoming PR1.3 will bring some CPU optimization itself, maybe we won´t even need this then...
honestly, there is some definite improvement in acceleration with 1300MHz, but nothing super-spectacular...
I can imagine replacing the A7 chip with some 1.4 GHz dual-core Qualcomm SnapDragon, indeed:D

ADRENALINE

2012-05-09 09:42

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.0.1]

Quote:

Originally Posted by jleholeho (Post 1203904)

this i think the new tizen samsumg will offer for us a quad core cpu with a 2000ma battery on a 4.7inch screen

besttt

2012-05-09 09:46

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.0.1]

it failed to charge profile at start up even all test were good

ibrakalifa

2012-05-09 09:58

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.0.1]

No, we use TIomap, a9 dualcore like on nexus will be so damn cool on n9

Timpaxi

2012-05-09 10:56

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.0.1]

That download link is not working, kernel modules 1.5.3 i mean.

besttt

2012-05-09 11:25

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.0.1]

1 Attachment(s)

Quote:

Originally Posted by Timpaxi (Post 1203944)

That download link is not working, kernel modules 1.5.3 i mean.

try this to download

Timpaxi

2012-05-09 11:29

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.0.1]

Quote:

Originally Posted by besttt (Post 1203953)

try this to download

Thanks! :)

Maybe you can send me that UI 1.0.1 file too.?

praveenchand

2012-05-09 11:44

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.0.1]

mine is 64gb black , 1350 Mhz & 1.375V now running peacefully for almost 2 hrs

besttt

2012-05-09 11:58

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.0.1]

1 Attachment(s)

Quote:

Originally Posted by Timpaxi (Post 1203955)

Thanks! :)

Maybe you can send me that UI 1.0.1 file too.?

take it my friend

Timpaxi

2012-05-09 13:15

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.0.1]

Quote:

Originally Posted by besttt (Post 1203977)

take it my friend

Thank you again. :)

besttt

2012-05-09 13:16

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.0.1]

the beta version now works perfect it loads any profile pass the test 2 times after 2 minutes maximum after restart

ADRENALINE

2012-05-09 13:18

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.0.1]

Quote:

Originally Posted by besttt (Post 1204020)

the beta version now works perfect it loads any profile pass the test 2 times after 2 minutes maximum after restart

thats great news hope it will be available for all of us soon....

Timpaxi

2012-05-09 13:20

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.0.1]

Quote:

Originally Posted by besttt (Post 1204020)

the beta version now works perfect it loads any profile pass the test 2 times after 2 minutes maximum after restart

So it's quite stable,right? Maybe i will install that too. Been thinking that i'll wait but... I can't! :D

besttt

2012-05-09 13:21

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.0.1]

its not something magick if you dont have good results with old version you dont have and with this but its more stable and safer and you have the load at start up

besttt

2012-05-09 13:24

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.0.1]

Quote:

Originally Posted by Timpaxi (Post 1204023)

So it's quite stable,right? Maybe i will install that too. Been thinking that i'll wait but... I can't! :D

work at this to download take your good result and the new is only to load at start your choice nothing else and you dont have to optimize again and again you just choose a profile and when you restart it loads if it pass the test 2 times

ADRENALINE

2012-05-09 13:24

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.0.1]

Quote:

Originally Posted by besttt (Post 1204024)

its not something magick if you dont have good results with old version you dont have and with this but its more stable and safer and you have the load at start up

so thats bad news for me since all my try outs ended by crashing and reboots i think i'll reflash my device and start with a new and clean installation for these testings

besttt

2012-05-09 13:26

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.0.1]

Quote:

Originally Posted by ADRENALINE (Post 1204027)

so thats bad news for me since all my try outs ended by crashing and reboots i think i'll reflash my device and start with a new and clean installation for these testings

try 1350mghz and 1375000 volts sr first on
and then off

ADRENALINE

2012-05-09 13:27

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.0.1]

Quote:

Originally Posted by besttt (Post 1204029)

try 1350mghz and 1375000 volts

going for it stay tuned ...>>>crashed

besttt

2012-05-09 13:29

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.0.1]

Quote:

Originally Posted by ADRENALINE (Post 1204031)

going for it stay tuned ...>>>crashed

sr on? or off?

ADRENALINE

2012-05-09 13:31

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.0.1]

Quote:

Originally Posted by besttt (Post 1204032)

sr on? or off?

sr on going for sr off right now

besttt

2012-05-09 13:32

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.0.1]

then try 1300 mhz with 1375000 volts sr on ant then off

ADRENALINE

2012-05-09 13:34

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.0.1]

Quote:

Originally Posted by besttt (Post 1204035)

then try 1300 mhz with 1375000 volts sr on ant then off

got it to pass the testing then it rebooted with sr off
going for 1300 mhz with 1375000 v sr on

besttt

2012-05-09 13:34

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.0.1]

did you install 1.5.3 armel deb and ui 1.0.1 armel.deb? or older versions?pr 1.2?or pr 1.1?at your mobile?

ADRENALINE

2012-05-09 13:36

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.0.1]

Quote:

Originally Posted by besttt (Post 1204038)

did you install 1.5.3 armel deb and ui 1.0.1 armel.de? or older versions?

i have the new versions 1.5.3 and 1.0.1

besttt

2012-05-09 13:37

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.0.1]

if your batery is empty you dont pass any test put the charger usb

besttt

2012-05-09 13:38

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.0.1]

Quote:

Originally Posted by ADRENALINE (Post 1204040)

i have the new versions 1.5.3 and 1.0.1

whats programe hardware?1.2?or 1.1?

Timpaxi

2012-05-09 13:38

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.0.1]

Well, i haven't had single reboot, only few times some app has crashed. So maybe i'll go that new beta version.

ADRENALINE

2012-05-09 13:39

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.0.1]

Quote:

Originally Posted by besttt (Post 1204042)

if your batery is empty you dont pass any test put the charger usb

batt is 80% but i think i screwd my device after installing Nitdroid and i don't use it that much so i think i will reflash my device

besttt

2012-05-09 13:40

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.0.1]

Quote:

Originally Posted by ADRENALINE (Post 1204045)

batt is 80% but i think i screwd my device after installing Nitdroid and i don't use it that much so i think i will reflash my device

pr 1.2 hartmatan?

ADRENALINE

2012-05-09 13:40

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.0.1]

Quote:

Originally Posted by besttt (Post 1204047)

pr 1.2 hartmatan?

yep i'm all upto-date:confused:

besttt

2012-05-09 13:42

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.0.1]

Quote:

Originally Posted by ADRENALINE (Post 1204050)

yep i'm all upto-date:confused:

reflash only one os

bnwg	2012-05-09 14:23

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.0.1]

1 Attachment(s)

This is my setting

Has been stable for more than 2 weeks

Tried 1300MHz with 1330000 volt SR on and stable for 1 week when using first version of ko but revised down to 1200MHz for safe sake.

TMavica

2012-05-09 14:26

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.0.1]

Quote:

Originally Posted by bnwg (Post 1204089)

This is my setting

Has been stable for more than 2 weeks

Tried 1300MHz with 1330000 volt SR on and stable for 1 week when using first version of ko but revised down to 1200MHz for safe sake.

I set this, then instant reboot
LOL

All times are GMT. The time now is 05:57.

Page 18 of 33

Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8