Re: Palm Contacts, Memos & Apps fully Syncronised between PC & N800
 

Not at Home tonight so unable to confirm the exact steps on and between PC and N800 running Garnet VM however, from memory :-

Right click on the palm hotsync icon on right hand side of Windows toolbar and select custom hotsync. Make sure that the options for transferring the Address book, Notes data etc, are set "PC to Palm" (This ensures that data goes one way only, to get it onto N800 etc)

I set all the other options under hotsync to "do nothing" to ensure only data of interest was transferred during that specific hotsync. (The very first run I tried was set to defaults, where it appeared that only apps were transferred and not the data for Address Book and notes etc, failed to complete sync with errors in log)

Make sure that the "Network" option is selected as a Hotsync option on PC to allow network and wireless connection.

I then wirelessly connected my N800 to my network and then within Garnet VM, I set the IP of my desktop PC. (Which allows the N800/Garnet VM to communicate and palm hotsync software running on desktop)

I did notice issues surrounding how to synchronise data that was originally held on the Palm devices SD card, prior to first synchronising with the desktop and second the N800/Garnet VM. The data that was originally on SD card did not seem to know where to be put within the Garnet VM environment (i.e. it did have a Palm SD = N800 ?? relationship setting) I have not resolved this yet.

My advice would be to also read Palm’s FAQ on how to re-synchronise palm data on the desktop, with a palm that has been reset; as this is essentially what we are doing to have data from one Palm added to another and in this case Garnet VM :) :)

Hope this information is helpful.

Re: Palm Contacts, Memos & Apps fully Syncronised between PC & N800
 

Does the latest palm desktop work in sync with outlook exchange?

Re: Palm Contacts, Memos & Apps fully Syncronised between PC & N800
 

How long does it take for an N800 on standby (low power or off?) to turn on, open the Garnet emulator, and view addresses or calendar entries in the PIM?

Can the Garnet emu be left running for quicker access without eating the battery?

Thank you.

Re: Palm Contacts, Memos & Apps fully Syncronised between PC & N800
 

RE: SlingPlayer on GVM: I got to the same point as you. I turned my cable box on manually, because everytime I tried to issue a remote control command, SlingPlayer crashed. Even with the SlingPlayer logged in and a video signal on, I still did not have anything displayed on SlingPlayer. It stayed on for a few seconds before it crashed also. If you have any further luck, please let me know.

Thanks!

Re: Palm Contacts, Memos & Apps fully Syncronised between PC & N800
 

@Grench: You can leave the Garmnet emu running. Then it takes a couple of seconds to launch the applications, i.e. not instantly as on a real Palm.
To quit the full-screen PalmOS programs hit escape (the hardware button with the curved arrow). To leave it running, hit the 'home' hardware button. Then you can switch to Hildon, and/or later switch between running PalmOS applications (i.e. pretty much instantly), the emulator itself, and native Hildon apps.

Re: Palm Contacts, Memos & Apps fully Syncronised between PC & N800
 

I think the installed files are hidden inside that virtual Palm storage areas it creates.

.prc and .pdb files can be installed with 'install' from the emulator. Haven't found a method of getting them out from there yet, but maybe I'll try installing FileZ..

Some apps I installed by sending them via BT to the N800, let the N800 store it as a file, then install the .prc or .pdb from GVM.

Re: Palm Contacts, Memos & Apps fully Syncronised between PC & N800
 

Were you able to sync the Date Book? Not having any luck here.

Re: Palm Contacts, Memos & Apps fully Syncronised between PC & N800
 

Hi,

I've been unable to hot sync my Palm data to my N800 because after entering the IP address of my computer, and tapping sync, I get an error message saying IP address not recognized. I have tried this with 3 different computers running a desktop software. I've set the hotsync setting to network. I've been able to install Palm apps by using the USB cable to load them into my Nokia's card from my computer, and then tapping INSTALL and installing from the Nokia's card. But this will not work for entering Palm datebook and addressbook data. Any help would be greatly appreciated.

Thanks.

Re: Palm Contacts, Memos & Apps fully Syncronised between PC & N800
 

Due to security restrictions I cannot get my N800 on the same network as my work computer, therefore the hotsync is not working. Assuming there is no way to get this to sync via the cable, can I copy certain palm files from my PC to my SD card or the the N800? If so what and how? Thank you!

Re: Palm Contacts, Memos & Apps fully Syncronised between PC & N800
 

I haven't used hotsync (from Palmdesktop) in years, but are those 'certain files' on the PC .pdb files? If they are, you can just copy them over to the N800 and install them with the 'install' option in gvm launcher. (I do this all the time but then I get the files directly from my Palm T3, either with FileZ or from the backup I hotsynched to my Linux PC with the pilot-link tools.)