Re: USB-RS232 on Nokia N800
 

Are there specific USB/Serial chipsets that work with this setup?

gLobster:
What USB/serial adapter are you using?Is it GEMBird, from the screenshot?

Re: USB-RS232 on Nokia N800
 

Yes. I only replace connector to miniA-USB with shorted 4 and 5 pins.

Re: USB-RS232 on Nokia N800
 

I finally got around to testing this... some success but some wierdness. I think it is some kind of terminal setting or maybe because I am using "screen".

I have an N800 with OS2008.
I loaded the usbserial drivers and ftdi driver into the kernel with no problem.
I manually put the N800 into host mode with "echo host > /sys/devices/platform/musb_hdrc/mode"
I get the same error message above about missing file system but I ignore it.
I then connected the USB serial adapter to another computer that I know has a working serial port.
At the N800 terminal, I type "screen /dev/ttyUSB0 57600,cs8,-ixon,-ixo" to get a terminal session at 57600 8 data bits, 1 stop bit, no parity, no flow control.
Characters typed on the N800 are received on the other computer as extended ascii character garbage with umlauts, accents, and weird symbold. However characters typed on the other computer are received just fine and displayed on the N800.

1. What terminal program (besides screen) are you using to access the serial port? Where can I get it?
2. Is there some character set settings on the N800 terminal that maybe is telling it to use extended ascii?

David
Any ideas?

Re: USB-RS232 on Nokia N800
 

Although you may have done it, on the PC side is your baud rate setting right and N81 with no flow control?

I also have an FTDI chip, but I'm waiting on my cable.

Re: USB-RS232 on Nokia N800
 

Should have done some more testing.... My problem was using screen for my terminal program. I found the link to pyserial in another thread and got that working on my N800 (I really gotta learn python someday). With pyserial I can send and receive perfectly. Now I am going to try and compile minicom in scratchbox since nobody seems to have posted it.

By the way, I saw your website. If you like state machines, you really need to check out www.quantum-leaps.com. Very cool stuff.

Update:
Building minicom could not have been much easier in scratchbox and it works like a charm!!! No warranties / guarantees but if anyone wants the minicom deb, just let me know.

David

Re: USB-RS232 on Nokia N800
 

Thanks!

Awesome!!.. Many people needed minicom ported.
Please can you pm me the deb link.

The quantum-leaps site is pretty interesting.

Re: USB-RS232 on Nokia N800
 

Ok, the usual blather.. no warranties / no guarantees. If your handheld suddenly burst into flames its not my problem.

You can download the minicom deb file here:
http://home.comcast.net/~davidsmoot/....2-5_armel.deb

Re: USB-RS232 on Nokia N800
 

Please let me know if the minicom port works for you. Is there a bluetooth serial device in /dev for OS2008 that I could use for wireless serial?

David

Re: USB-RS232 on Nokia N800
 

/dev/rfcomm*

where * is 0,1,2...

Re: USB-RS232 on Nokia N800
 

Im getting an "incompatible application type " error, while installing.