maemo.org - Talk - Cannot install SiB (mPlayer) on n900

maemo.org - Talk (https://talk.maemo.org/index.php)

- Applications (https://talk.maemo.org/forumdisplay.php?f=41)

- - Cannot install SiB (mPlayer) on n900 (https://talk.maemo.org/showthread.php?t=45360)

Re: Cannot install SiB (mPlayer) on n900

Maybe you can try:
in KMPLAYER, select Player, choose Mplayer.
and i think it works qiuet well

Re: Cannot install SiB (mPlayer) on n900

I have been trying to watch a .mkv file in mplayer using sib and kmplayer to load the file. The sound works great, however the video renders slowly. Is there a way to configure mplayer to render the video more quickly?

Re: Cannot install SiB (mPlayer) on n900

try to double click D when you are watching

Re: Cannot install SiB (mPlayer) on n900

Thanks for the reply. That speeds it up a little bit, but not enough. Anything else?

Re: Cannot install SiB (mPlayer) on n900

Quote:

Originally Posted by wakkamis (Post 545866)

Thanks for the reply. That speeds it up a little bit, but not enough. Anything else?

and again:

mkv is only the container... what's more important is the content:
1. video-codec, resolution, fps, bitrate
2. audio-codec, sample-rate, bitrate

what are those values in your case?

Re: Cannot install SiB (mPlayer) on n900

I understand that mkv is a container file. the fact that it plays at all leads me to believe it is at least partially supported.

I downloaded some MediaInfo program to figure out that these mkv's are made up of.

Heres what I get for video:

Quote:

ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : Main@L3.0
Format settings, CABAC : Yes
Format settings, ReFrames : 2 frames
Muxing mode : Container profile=Unknown@3.0
Codec ID : V_MPEG4/ISO/AVC
Duration : 24mn 31s
Bit rate : 650 Kbps
Nominal bit rate : 763 Kbps
Width : 720 pixels
Height : 480 pixels
Display aspect ratio : 4:3
Frame rate : 29.970 fps
Standard : NTSC
Resolution : 8 bits
Colorimetry : 4:2:0
Scan type : Progressive
Bits/(Pixel*Frame) : 0.063
Stream size : 114 MiB (45%)
Writing library : x264 core 65
Encoding settings : cabac=1 / ref=2 / deblock=1:0:0 / analyse=0x1:0x111 / me=umh / subme=6 / psy_rd=1.0:0.0 / mixed_ref=0 / me_range=16 / chroma_me=1 / trellis=0 / 8x8dct=0 / cqm=0 / deadzone=21,11 / chroma_qp_offset=-2 / threads=3 / nr=0 / decimate=1 / mbaff=0 / bframes=2 / b_pyramid=0 / b_adapt=1 / b_bias=0 / direct=1 / wpredb=0 / keyint=300 / keyint_min=30 / scenecut=40(pre) / rc=2pass / bitrate=763 / ratetol=1.0 / qcomp=0.60 / qpmin=10 / qpmax=51 / qpstep=4 / cplxblur=20.0 / qblur=0.5 / ip_ratio=1.40 / pb_ratio=1.30 / aq=1:1.00
Color primaries : BT.601-6 525, BT.1358 525, BT.1700 NTSC, SMPTE 170M
Transfer characteristics : BT.709-5, BT.1361
Matrix coefficients : BT.601-6 525, BT.1358 525, BT.1700 NTSC, SMPTE 170M

And for Audio:

Quote:

ID : 5
Format : AC-3
Format/Info : Audio Coding 3
Codec ID : A_AC3
Duration : 24mn 33s
Bit rate mode : Constant
Bit rate : 192 Kbps
Channel(s) : 2 channels
Channel positions : L R
Sampling rate : 48.0 KHz
Stream size : 33.7 MiB (13%)
Language : English

None of that means too much to me however. Any ideas?

Thanks much!

Re: Cannot install SiB (mPlayer) on n900

how about trying to play file from shell with mplayer to see error log?
also you can probably make some files play better with

Code:

lavdopts=skiploopfilter=nonref

in mplayer config or setting it from command line