maemo.org - Talk - Putting an Oyster card inside your N900.

maemo.org - Talk (https://talk.maemo.org/index.php)

- Nokia N900 (https://talk.maemo.org/forumdisplay.php?f=44)

- - Putting an Oyster card inside your N900. (https://talk.maemo.org/showthread.php?t=55182)

Re: Putting an Oyster card inside your N900.

I'm not sure if it will work, the antenna is quite strange placed in your phone and the amount of "turns" inside the case should be the same. Else it may sends on a wrong frequency. We will see, chances are ... 50:50?

Re: Putting an Oyster card inside your N900.

I'd be worried about some git nabbing me phone...

Re: Putting an Oyster card inside your N900.

this must be the most practical & interesting homebrew I've seen in a while.

Re: Putting an Oyster card inside your N900.

The Oyster cards use RFID technology, so the scanning antenna (the place where cards are swiped) actually provides power to the RFID chip: radio waves are induced through the red wire antenna to power the chip's transponder and transceiver. Therefore the red wire antenna will need to be kept exactly as it is found in the card to work, otherwise the power will simply be wrong and most likely burn out the chip.

Time to get the tracing paper out xD

Re: Putting an Oyster card inside your N900.

Quote:

Originally Posted by barrieluv (Post 701111)

Well, I got to the tube station and it drew a blank. Nothing happened. I took the back off my phone and tried it face down against the reader, but no joy. I removed it from the phone and tried it "naked". Still nothing. And then I noticed that the aerial had come away from one side of the chip! Damn and blast it's fragility!
So, I'll pick up another one (I've got lots of nail varnish remover left) and give it another go.
I found this video, so I know it can be done. It looks like I may have to run the aerial all the way round the case back to get it to work properly, though.
Results to follow...

How thick and flexible is what is left in your sixth photo? Would it fit between the battery cover and the battery? If so, why not trim the edges and cut a hole out for the lens cover assembly? This would maintain the coil's shape and stop it disconnecting from the chip. This is being posted from an N900 with this Oyster card-sized piece of paper inserted. The right hand edge would need to be trimmed to ensure the loop fitted within the thin strip remaining on the right hand side of the lens cover cutout.

Re: Putting an Oyster card inside your N900.

Quote:

Originally Posted by TomJ (Post 701218)

This is something I've already thought of and will give it a go before I go ahead and strip the chip/aerial out.

Re: Putting an Oyster card inside your N900.

Quote:

Originally Posted by barrieluv (Post 701229)

This is something I've already thought of and will give it a go before I go ahead and strip the chip/aerial out.

Great minds... 8-)

Re: Putting an Oyster card inside your N900.

Aaargh! It would be easier if I could test whether or not this is working at home...
http://barrieluv.blogspot.com/2010/0...empt-fail.html