![]() |
Re: Your N900 Maximum Overclock
The whole settings reset after reboot is just to protect your N900 from bad overclocks, so you don't need to reflash everytime your overclock fails, anyway check this post http://talk.maemo.org/showpost.php?p...&postcount=774 go to the bottom of it and you will find how to make custom widgets to apply overclocks on the fly, cheers.
edit: or just do what gtessier00 said if you are sure your overclock is all stable and good. |
Re: Your N900 Maximum Overclock
Quote:
|
Re: Your N900 Maximum Overclock
Quote:
It is very handy for me. |
Re: Your N900 Maximum Overclock
Oh damn I voted before reading your post.
I voted for 900Mhz, but I never even tried over that. Sorry :c EDIT: OK I'm at 1000Mhz now.. oddly warm this thing, I think I'll go back to 900MHz |
Re: Your N900 Maximum Overclock
my 24/7 is 1150mhz since overclocking was discovered
|
Re: Your N900 Maximum Overclock
I'm using Fecn's dbus scripts to automatically adjust the clock speed according to temperature:
http://wiki.maemo.org/Overclocking#U..._.28by_Fecn.29 Works great, and this way the CPU is never cooked... ;) |
Re: Your N900 Maximum Overclock
1150 works here using "ideal" profile.
Note: I did need to pump up the voltage a little for 850MHz and 950MHz speeds, but 1000, 1100 and 1150 voltage settings are same as "ideal". I'm likely to settle for 1000MHz as for 24/7 setting. |
Re: Your N900 Maximum Overclock
Mine won't quite make 1150, but runs 1100 stable at 72 voltage.
I usually run 1GHz @62 -- 60 wasn't stable, 61 seemed to be, so I gave it an extra kick to avoid surprises. |
Re: Your N900 Maximum Overclock
I'm at 1000 MHz @ 56 without apparent trouble.
|
Re: Your N900 Maximum Overclock
So I voted for 850, but I've never run at a higher rate. If you are thinking that everyone voting crashed at higher than the max they listed, I think several votes such as mine don't reflect that. I have a feeling that mine will do 1Gh with ideal, but don't intend to try.
|
All times are GMT. The time now is 08:05. |
vBulletin® Version 3.8.8