maemo.org - Talk
Page 2 of 4 1 2 34
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   Nokia N900 (https://talk.maemo.org/forumdisplay.php?f=44)
-   -   N900 eMMC PR1.2 flash freezes (https://talk.maemo.org/showthread.php?t=57653)

jerryfreak 2010-07-04 12:48
Re: N900 eMMC PR1.2 flash freezes
 
bookmark for later

fahadj2003 2010-07-07 05:49
Re: N900 eMMC PR1.2 flash freezes
 
Quote:
Originally Posted by jaywhy13 (Post 740119)
Thanks fahad. That's the only thing that worked. Just for information purposes here's what I did. I used a netbook running Windows 7 (32 bit)
Flash the FIASCO image without the "-R"

Right after flashing is complete...

Flash with the eMMC image with the "-R"
LOL
no prob man
and on the whole forum, ure the only person who got my name right
other refer to me as fahadj
and j is the initial of my last name -__-

ScourgeV 2010-07-28 21:05
Re: N900 eMMC PR1.2 flash freezes
 
Hello, I'm having the same problem as jaywhy13. I've tried flashing the Fiasco image without "-R" and then flashing the eMMC afterwards with and without the "-R" and each time it still freezes on the second dot when loading.

DrWilken 2010-07-28 21:07
Re: N900 eMMC PR1.2 flash freezes
 
1 Attachment(s)
Quote:
Originally Posted by jerryfreak (Post 740326)
bookmark for later
You do know You can use "Thread Tools -> Subscribe to this Thread", right? :)

(and unsubscribe when You're already subscribed as below)

Attachment 12563

Patroclo 2010-07-28 21:22
Re: N900 eMMC PR1.2 flash freezes
 
So, why all these people have this kind of problems in flashing? Is the guide in the wiki correct or is there something wrong?

DrWilken 2010-07-28 21:25
Re: N900 eMMC PR1.2 flash freezes
 
I flashed my device (on Ubuntu 10.04 32-bit) with PR1.2 using the instructions in the Wiki so I don't think they're wrong.

Maybe the device(s) is(are) damaged (too much overclocking)...?

Why flash the device if something wasn't wrong to begin with? :)

ScourgeV 2010-07-28 21:47
Re: N900 eMMC PR1.2 flash freezes
 
I'm pretty sure the Wiki is correct but for some reason I can't get it to go past the second dot when flashing eMMC. I hade mobilehotspot installed which installed the Enhanced Linux Kernl for Power users. and when I tried to deinstall it my phone wouldn't boot anymore. So no overclocking done just kernel issues I suppose.

ScourgeV 2010-07-29 03:07
Re: N900 eMMC PR1.2 flash freezes
 
Just incase anyone needs help still got my eMMC flashed finally. I used Virtual PC(on my windows 7 64-bit) running Windows XP. Using the wiki for the commands I was able to flash the eMMC. I noticed that you have to move your mouse to the top of the screen and find the USB tab and select Attach Nokia in usb mode or whatever it says(cant remember) and it will load and then say "Booting device in flash mode then Suitable device not found, waitng" You have to go to the usb tab again and re-attach the nokia device again and if it doesnt load still go to the usb tab one more time and see if if theres another device name communication device and attach it as well. Then it should flash and work. If its confusing let me know but hopefully this helps!

telecomgeek79 2010-07-29 15:24
Re: N900 eMMC PR1.2 flash freezes
 
Quote:
Originally Posted by ScourgeV (Post 768631)
Just incase anyone needs help still got my eMMC flashed finally. I used Virtual PC(on my windows 7 64-bit) running Windows XP. Using the wiki for the commands I was able to flash the eMMC. I noticed that you have to move your mouse to the top of the screen and find the USB tab and select Attach Nokia in usb mode or whatever it says(cant remember) and it will load and then say "Booting device in flash mode then Suitable device not found, waitng" You have to go to the usb tab again and re-attach the nokia device again and if it doesnt load still go to the usb tab one more time and see if if theres another device name communication device and attach it as well. Then it should flash and work. If its confusing let me know but hopefully this helps!
Same thing happened for me with getting stuck @ the 2nd dot. Rebooted the Virtual PC. After it came up I attached the n900 (it showed PC Suite mode) then I ran the emmc flash command.
It found the device right away...wrote the emmc in 29.76 seconds and rebooted....waiting for it to come up now. :)

telecomgeek79 2010-07-31 00:40
Re: N900 eMMC PR1.2 flash freezes
 
Had to reset again as I screwed up the rootfs...I like to play around. :P
And it worked flawlessly.

Windows 7 64 Bit.
Windows Virtual PC - Windows XP SP3

Did the Following.

Hold down "U"

Plugged in N900

Ran command below ( I decided to do the Global instead of US )
Code:
C:\Program Files\maemo\flasher-3.5>flasher-3.5.exe -F RX-51_2009SE_10.2010.19-1_
PR_COMBINED_MR0_ARM.BIN -f
flasher v2.5.2 (Sep 24 2009)

SW version in image: RX-51_2009SE_10.2010.19-1_PR_MR0
Image 'kernel', size 1705 kB
        Version 2.6.28-20101501+0m5
Image 'rootfs', size 173568 kB
        Version RX-51_2009SE_10.2010.19-1_PR_MR0
Image 'cmt-2nd', size 81408 bytes
        Version BB5_09.36
Image 'cmt-algo', size 519808 bytes
        Version BB5_09.36
Image 'cmt-mcusw', size 5826 kB
        Version rx51_ICPR82_10w08
Image '2nd', size 14720 bytes
        Valid for RX-51: 2217, 2218, 2219, 2220, 2120
        Version 1.4.14.8+0m5
Image 'xloader', size 14848 bytes
        Valid for RX-51: 2217, 2218, 2219, 2220, 2120
        Version 1.4.14.8+0m5
Image 'secondary', size 109440 bytes
        Valid for RX-51: 2217, 2218, 2219, 2220, 2120
        Version 1.4.14.8+0m5
Image '2nd', size 14720 bytes
        Valid for RX-51: 2101, 2102, 2103
        Version 1.4.14.8+0m5
Image 'xloader', size 14848 bytes
        Valid for RX-51: 2101, 2102, 2103
        Version 1.4.14.8+0m5
Image 'secondary', size 109440 bytes
        Valid for RX-51: 2101, 2102, 2103
        Version 1.4.14.8+0m5
Image '2nd', size 14848 bytes
        Valid for RX-51: 2307, 2308, 2309, 2310
        Version 1.4.14.8+0m5
Image 'xloader', size 14848 bytes
        Valid for RX-51: 2307, 2308, 2309, 2310
        Version 1.4.14.8+0m5
Image 'secondary', size 109440 bytes
        Valid for RX-51: 2307, 2308, 2309, 2310
        Version 1.4.14.8+0m5
Image '2nd', size 14848 bytes
        Valid for RX-51: 2407, 2408, 2409, 2410
        Version 1.4.14.8+0m5
Image 'xloader', size 14848 bytes
        Valid for RX-51: 2407, 2408, 2409, 2410
        Version 1.4.14.8+0m5
Image 'secondary', size 109440 bytes
        Valid for RX-51: 2407, 2408, 2409, 2410
        Version 1.4.14.8+0m5
Image '2nd', size 14848 bytes
        Valid for RX-51: 2301, 2302, 2303, 2304, 2305, 2306
        Version 1.4.14.8+0m5
Image 'xloader', size 14848 bytes
        Valid for RX-51: 2301, 2302, 2303, 2304, 2305, 2306
        Version 1.4.14.8+0m5
Image 'secondary', size 109440 bytes
        Valid for RX-51: 2301, 2302, 2303, 2304, 2305, 2306
        Version 1.4.14.8+0m5
Image '2nd', size 14848 bytes
        Valid for RX-51: 2401, 2402, 2403, 2404, 2405, 2406
        Version 1.4.14.8+0m5
Image 'xloader', size 14848 bytes
        Valid for RX-51: 2401, 2402, 2403, 2404, 2405, 2406
        Version 1.4.14.8+0m5
Image 'secondary', size 109440 bytes
        Valid for RX-51: 2401, 2402, 2403, 2404, 2405, 2406
        Version 1.4.14.8+0m5
Image '2nd', size 14720 bytes
        Valid for RX-51: 2104, 2105, 2106, 2107, 2108, 2109, 2110, 2111, 2112, 2
113, 2114, 2115, 2116, 2117, 2118, 2119
        Version 1.4.14.8+0m5
Image 'xloader', size 14848 bytes
        Valid for RX-51: 2104, 2105, 2106, 2107, 2108, 2109, 2110, 2111, 2112, 2
113, 2114, 2115, 2116, 2117, 2118, 2119
        Version 1.4.14.8+0m5
Image 'secondary', size 109440 bytes
        Valid for RX-51: 2104, 2105, 2106, 2107, 2108, 2109, 2110, 2111, 2112, 2
113, 2114, 2115, 2116, 2117, 2118, 2119
        Version 1.4.14.8+0m5
Image '2nd', size 14848 bytes
        Valid for RX-51: 2501, 2502, 2503, 2504, 2505, 2506
        Version 1.4.14.8+0m5
Image 'xloader', size 14848 bytes
        Valid for RX-51: 2501, 2502, 2503, 2504, 2505, 2506
        Version 1.4.14.8+0m5
Image 'secondary', size 109440 bytes
        Valid for RX-51: 2501, 2502, 2503, 2504, 2505, 2506
        Version 1.4.14.8+0m5
Image '2nd', size 14848 bytes
        Valid for RX-51: 2607, 2608, 2609, 2610
        Version 1.4.14.8+0m5
Image 'xloader', size 14848 bytes
        Valid for RX-51: 2607, 2608, 2609, 2610
        Version 1.4.14.8+0m5
Image 'secondary', size 109440 bytes
        Valid for RX-51: 2607, 2608, 2609, 2610
        Version 1.4.14.8+0m5
Image '2nd', size 14848 bytes
        Valid for RX-51: 2507, 2508, 2509, 2510
        Version 1.4.14.8+0m5
Image 'xloader', size 14848 bytes
        Valid for RX-51: 2507, 2508, 2509, 2510
        Version 1.4.14.8+0m5
Image 'secondary', size 109440 bytes
        Valid for RX-51: 2507, 2508, 2509, 2510
        Version 1.4.14.8+0m5
Image '2nd', size 14720 bytes
        Valid for RX-51: 2201, 2202, 2203, 2204, 2205, 2206, 2207, 2208, 2209, 2
210, 2211, 2212, 2213, 2214, 2215, 2216
        Version 1.4.14.8+0m5
Image 'xloader', size 14848 bytes
        Valid for RX-51: 2201, 2202, 2203, 2204, 2205, 2206, 2207, 2208, 2209, 2
210, 2211, 2212, 2213, 2214, 2215, 2216
        Version 1.4.14.8+0m5
Image 'secondary', size 109440 bytes
        Valid for RX-51: 2201, 2202, 2203, 2204, 2205, 2206, 2207, 2208, 2209, 2
210, 2211, 2212, 2213, 2214, 2215, 2216
        Version 1.4.14.8+0m5
Image '2nd', size 14848 bytes
        Valid for RX-51: 2601, 2602, 2603, 2604, 2605, 2606
        Version 1.4.14.8+0m5
Image 'xloader', size 14848 bytes
        Valid for RX-51: 2601, 2602, 2603, 2604, 2605, 2606
        Version 1.4.14.8+0m5
Image 'secondary', size 109440 bytes
        Valid for RX-51: 2601, 2602, 2603, 2604, 2605, 2606
        Version 1.4.14.8+0m5
USB device found found at bus bus-0, device address \\.\libusb0-0001--0x0421-0x0
105.
Found device RX-51, hardware revision 2101
NOLO version 1.4.14
Version of 'sw-release': RX-51_2009SE_10.2010.19-1.002_PR_002
Sending xloader image (14 kB)...
100% (14 of 0 kB, avg. 14 kB/s)
Sending secondary image (106 kB)...
100% (106 of 0 kB, avg. 106 kB/s)
Flashing bootloader... done.
Sending cmt-2nd image (79 kB)...
100% (79 of 0 kB, avg. 79 kB/s)
Sending cmt-algo image (507 kB)...
100% (507 of 0 kB, avg. 507 kB/s)
Sending cmt-mcusw image (5826 kB)...
100% (5826 of 0 kB, avg. 5826 kB/s)
Flashing cmt-mcusw... done.
Sending kernel image (1705 kB)...
100% (1705 of 0 kB, avg. 1705 kB/s)
Flashing kernel... done.
Sending and flashing rootfs image (173568 kB)...
100% (173568 of 0 kB, avg. 173568 kB/s)
Finishing flashing... done
CMT flashed successfully
As the CMT was progressing close to 100% I held down the "U" on the N900 keyboard!!!

After it said "CMT flashed successfully"

I had to do a "USB" "Attach" inside the Virtual PC!!

Ran the command below and after it found the address I let go of the "U" on the keyboard.

Did I find the missing link?
Code:
C:\Program Files\maemo\flasher-3.5>flasher-3.5.exe -F RX-51_2009SE_10.2010.13-2.
VANILLA_PR_EMMC_MR0_ARM.bin -f -R
flasher v2.5.2 (Sep 24 2009)

Image 'mmc', size 255947 kB
        Version RX-51_2009SE_10.2010.13-2.VANILLA
USB device found found at bus bus-0, device address \\.\libusb0-0001--0x0421-0x0
105.
Found device RX-51, hardware revision 2101
NOLO version 1.4.14
Version of 'sw-release': RX-51_2009SE_10.2010.19-1_PR_MR0
Booting device into flash mode.
Suitable USB device not found, waiting.
USB device found found at bus bus-0, device address \\.\libusb0-0001--0x0421-0x0
1c8.
Raw data transfer EP found at EP2.
Image(s) flashed successfully in 28.040 s (9127 kB/s)!

C:\Program Files\maemo\flasher-3.5>
So: as the flash is completing on the first one, hold down the "u" on the n900 keyboard and only let go of it after you run the MMC command and it finds the N900.

Hope that helps. I don't know if the instructions are Wiki worthy or not.

telecomgeek79


All times are GMT. The time now is 16:32.
Page 2 of 4 1 2 34
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8