Re: Cannot Flash EMMC
 

have you tried the rescue initrd + meego kernel as posted above and try fixing from pc after the emmc appears as a device in your pc ? just try that before declaring the emmc dead...

Re: Cannot Flash EMMC
 

I flashed the phone before with no problems, following the same procedure as on maemo wiki. Something is corrupted. The fact that if I delete the files thru xterm I get an error with access denied message. If I delete thru the File Browser- it shows that it deleted it but after reboot the file is still there.

Re: Cannot Flash EMMC
 

dude i had a similar problem with the same error but i followed these instructions n i was able to flash emmc...

flasher-3.5 -F RX-51_2009SE_10.2010.19-1_PR_COMBINED_MR0_ARM.bin -f

change kernel with
flasher-3.5 -F RX-51_2009SE_1.2009.42-11_PR_COMBINED_MR0_ARM.bin' --flash-only=kernel -f

Restore emmc with vanilla
flasher-3.5 -F RX-51_2009SE_10.2010.13-2.VANILLA_PR_EMMC_MR0_ARM.bin' -f -R

hope it works for you

Re: Cannot Flash EMMC
 

Tnx for the help guys, but the phone already on its way to Alabama repair center, because my warranty expires within a month and I did not want to wait-. Will let you know what Nokians think about this problem.
Also I did try before flashing the older image with older emmc with same result.

Re: Cannot Flash EMMC
 

New replacement phone is on its way from Alabama. Or refurb- will see.

Re: Cannot Flash EMMC
 

Ive got brand new shiny phone, initially I wanted to sell it and get android based phone... Turned out I am still with Maemo, even its EOL.

Re: Cannot Flash EMMC
 

I am now having the same problem, I had the problem this morning with Flasher-3.5 which the Nokia Rep had no idea what that was when I talked to him. He told me to use Ovi suite, and I just found out that doesn't work either. I'm gonna call tomorrow and hopefully they'll send me a replacement. And since Maemo is EOL, it's time for me to go to Android, cause Nokia's future with Meego doesn't look as fun as Maemo.

Re: Cannot Flash EMMC
 

Hi Friends,

New N900 user here, just bought my device this Monday. I recently got hooked into Linux early this year so I found this device very interesting and I'm enjoying it so far. :)

Following the wiki guide here: https://wiki.maemo.org/Updating_the_firmware as well as the summarized version above as my quick-reference guide, I have verified that the procedure works. :)

Just one question: the wiki procedure stated that, if you are to flash the eMMC (the 32GB internal storage) as well as the OS itself (rootfs), first should be EMMC first and then the OS. (direct link here: https://wiki.maemo.org/Updating_the_...MC_in_the_N900):

because...

However, the way the instructions on the wiki are presented makes it seem like it should be the other way around, i.e. OS first and then eMMC. Likewise, I've been reading up a lot of threads about flashing in this forum and most of the advices are pretty similar (OS first before eMMC). I just wanted to confirm which is which?

On my part though, here are the order of steps taken:

1. Flashed the OS (rootfs) via the "combined" image/file (I removed/did not include the "-R" option of the command)
2. Flashed the eMMC (the 32 GB storage) via the "Vaniila eMMC" image/file (I removed/did not include the "-R" option of the command)
3. Flashed the OS again as per the disclaimer/note. (I added the "-R" option of the command)

Note:

1. I used a Linux OS (Ubuntu 10.04) since I'm getting hooked to Linux. :)
2. I read up on a lot of posts before I actually did this, to ensure I had an understanding of common problems encountered by other users and tried to research based on their experience before I tried this to my device.
3. One common problem experienced with flashing, based on what I've read, is something similar to this (based here: http://forums.internettablettalk.com...3&postcount=17):

Not sure if this will help, but I seemed to have experienced this too (Terminal/command line is just stuck at 'suitable USB device not found'). My phone's keyboard slider was open and I closed it, and then the flashing continued. Or it could be my imagination and I was just impatient and it just incidentally continued as it was supposed to, perhaps I just had the impression that my closing the slider keyboard had anything to do with it. Just wanted to share.

Thanks in advance. :)

Re: Cannot Flash EMMC
 

Hello,

Twice I also have the read-only system file (30) problem with eMMC when trying to delete files from the MyDocs folder, or copy files to it, either from the external card or from PC.

The first time I had the problem, I reflash both the OS and the EMMC and things were back to normal. That time I was copying some movies from the external memory card using Midnight Commander when the N900 froze. I rebooted the phone and could neither delete the unfinished file nor any other file from the eMMC.

The problem gone a little while and now it comes back, and I can't remember what I did that cause the MyDocs to become read only. But I am sure it is not the unfinished file copying problem. Also, I don't use torrent download on the N900, not even install torrent client on it, so that cause can be ruled out safely.

I tried the above advice by ivyking, but seems nothing wrong there, umount OK, remount OK. Still, "Unable to continue, read-only folder Documents" when deleting via the builtin File Manager, or "read-only file system (30)" when deleting via Midnight Commander.

Even, when I change the camera app to use internal memory instead of the external one, I cannot take picture because the app cannot write to the internal memory.

The MyDocs partition is not Windows filesystem, so fixdisk or scandisk cannot help.

Reflashing is not a big deal, having to reinstall everything back is doable, but the problem will be back sometimes after reflashing because we haven't figured out the cause of it.

Could anyone provide a proper cure instead of just reflashing, which as many others have faced: not always possible?

Re: Cannot Flash EMMC
 

Try fsck after unmounting the partition. First find out the partition to checkThis will list every mounted partition and folder. Identify the partition mounted at /home/user/MyDocs, may be /dev/mmcblk0p1, the default.
Unmount the partitionCheck the file systemFsck should identify the file system type.
Then, if everything goes well, mount it back to its place