maemo.org - Talk
Page 2 of 7 1 2 34 Last »
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   Applications (https://talk.maemo.org/forumdisplay.php?f=41)
-   -   [Announce] saveCPU - overheating control for overclocked n900 (https://talk.maemo.org/showthread.php?t=71454)

Brad_M 2011-03-24 19:37
Re: [Announce] saveCPU - overheating control for overclocked n900
 
Quote:
Originally Posted by ammyt (Post 974996)
Nope. Our OMAP 3430 lacks a temperature sensor. Instead, there is a temperature sensor located near the battery, it can measure the battery's temperature in theory. Even though this might not be accurate, a battery temperature below 50 ^C is always good! :D
Oh I see :p A temperature sensor on the CPU would've been more useful :p I never knew it had one though THANKS!!

m750 2011-03-24 19:40
Re: [Announce] saveCPU - overheating control for overclocked n900
 
OK thanks, but also the bq27200 module is related to the battery.

MetalSer 2011-03-24 19:59
Re: [Announce] saveCPU - overheating control for overclocked n900
 
This sounds really good. I will wait till it hits the extras, but thanx in advance!

casketizer 2011-03-24 20:10
Re: [Announce] saveCPU - overheating control for overclocked n900
 
What exactly does the control delay do/mean?

m750 2011-03-24 20:18
Re: [Announce] saveCPU - overheating control for overclocked n900
 
Quote:
Originally Posted by casketizer (Post 975023)
What exactly does the control delay do/mean?
The temperature is not constantly monitorated, it is checked every "X" minutes. X is the control delay

casketizer 2011-03-24 20:23
Re: [Announce] saveCPU - overheating control for overclocked n900
 
ow....i guess after the default 10min you have the cpu well done :)

j/k

jotoco 2011-03-24 20:32
Re: [Announce] saveCPU - overheating control for overclocked n900
 
Even though I have ran my n900 overclocked to 1150 for several hours of heavy load, it is good to have a fail safe tool.

Specially when you live in a city where 40ºC is normal room temp.

sub7 2011-04-01 15:51
Re: [Announce] saveCPU - overheating control for overclocked n900
 
I recently installed this but it shows me always 0 degrees.

Why is this for? i have to install something before?.

m750 2011-04-01 20:41
Re: [Announce] saveCPU - overheating control for overclocked n900
 
Package needed:
Enhanced Linux kernel for power users
Enhanced Linux kernel for power users (settings)

And during installation the package try to install the bq27200 module
Code:
sudo gainroot
echo bq27x00_battery >> /etc/modules
modprobe bq27x00_battery

sophocha 2011-04-13 13:02
Re: [Announce] saveCPU - overheating control for overclocked n900
 
thank u for this app.it was a life saver for me.I was working on the car yesterday and i left my phone on the dash.totally forgot about it until i finished 2 hours later on a very hot day.I freaked out until I saw the app work its magic...and the phone was at 58 celcius.God know how much more it would have been with the 1000 overclock i had.thanks!

I recommend this app to anybody out there who overclocks!


All times are GMT. The time now is 03:00.
Page 2 of 7 1 2 34 Last »
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8