Re: N9 Body Creaking?
 

I think the area between the screen and the case can become slightly loose over time, introducing a creaking sound if you hold the phone and squeeze it slightly. That's what's happened with my wife's phone it appears.

Re: N9 Body Creaking?
 

my screen now makes a very slight pop sound if you firmly press the center, almost like it is not fully seated in the body.
it comes and goes.

Re: N9 Body Creaking?
 

I wonder what the substructure is made out of. I would think Polycarbonate would be less or more affected by temperature change (I'm thinking less), but if the substructure if metal (and plastic PCB) and the glass cover is... glass... then we have a whole bunch of components expanding and contracting at different rates. Combine that with a unibody design and I can see what we have some creaking. Obviously they probably engineered tolerances. Like I indicated, I can live with it. I'd rather have a phone that creaks but I can drop and not worry about it shattering, than a phone that doesn't creak but is so fragile to any drops/stresses.

Obviously, Polycarbonate has some flexibility in it, which makes it sturdy... .because, right, if something is less flexible, it has a tendency to shatter/dent/break when stressed (eg when dropped). Lol I remember years ago, taking my Polycarbonate water bottle and SLAMMING it from a height of at least 5 feet into concrete, the thing bounced, scratched a bit, but otherwise no permanent damage. I can't say I can do the same with my Stainless Steel water bottles... at least without a big ol' dent (I've dropped a couple from waist height).

Re: N9 Body Creaking?
 

I mentioned the same sounds when i press the body a few mm under the on/off button :-( I have the feeling that the display isn't 100% fitted into the body.

Re: N9 Body Creaking?
 

What make is your device, where did you get it from?

Re: N9 Body Creaking?
 

I get creaking with my N9 also when squeezing it from left & right sides inwards, more prevelant towards the upper 1/3 of the body. N9 is sourced from Singapore and lives in HK... around 25C today.

I also noticed a small gap between top of glass and frame maybe 0.5mm (worried about it being a dust magnet). It is, however, flush to glass on the sides and bottom edges. Almost like the glass is too short for the frame. Perhaps this tolerance is needed to fit the unit into the body.

Anyone else have this?

Re: N9 Body Creaking?
 

I'm also experiencing creaking around the lower half, both sides I think.
Removing the (very nice) silicon case makes no change.

I tried ignoring this for a while but it occurs so often during normal usage it's quite unsettling. I also notice there is some movement between glass and polycarbonate body, which I suspect may be the cause. Maybe the adhesive holding the two has come off?

I didn't have this issue with my first 64GB (Austrian batch which suffered from chronic reboot/crashes) and so have arranged an exchange.

I really didn't want to do this as I'm really liking this phone but it's difficult to have confidence in the current unit, so thought it would be better to deal with it now than when it potentially leads to a bigger problem later and have to deal with Nokia Warranty (who finally replaced my N900 with USB detached fault with another N900 after first providing me an E7).

Re: N9 Body Creaking?
 

I have the same thing with my N9. It seems to happen when I press the sides of the phone and the top. This is definitely the sound between the body and the screen. I started to notice it much more when I was putting it in to my new Nokialeather case that's really tight. Bothered me a little till I saw this thread. I guess i am not the only one :)

Re: N9 Body Creaking?
 

Mine creaks too, i think it has been made worst because its in the cover!

when you push the power button, it feels like you have to push it harder as its very tightly protected by the case! and you sort of push on the case and button at the same time. If you use your nail its easier but early pushing has probably caused the creaking!

Re: N9 Body Creaking?
 

That's also my impression. They should've flattened the case more at this point.