Re: Can anybody give me a hand? :) Might pay £20 via paypal if you do a good job ;)
 

C:\Program Files\Nokia\Flasher>flasher -F main.bin -F emmc.bin -f -R --no-preserve

Re: Can anybody give me a hand? :) Might pay £20 via paypal if you do a good job ;)
 

Congratulations...

You just won £20!!

PM me :)

Re: Can anybody give me a hand? :) Might pay £20 via paypal if you do a good job ;)
 

thanks, received :)

Re: Can anybody give me a hand? :) Might pay £20 via paypal if you do a good job ;)
 

Congrats to you... :)

I just cant get red of that "warranty message icon" on zimage, it's flashing but the message still appears and is annoying and wast of time...maybe is not here i have to ask this question...i entered this...

C:\Nokia\Flasher>c:/nokia/flasher/flasher.exe -a c:/nokia/flasher/DFL61_HARMATTA
N_40.2012.21-3_PR_LEGACY_009-OEM1-958_ARM.bin -k c:/nokia/flasher/zimage.pr13 --
flash-only=kernel --suppress-warranty-warning -f -R
flasher 3.12.1 (Oct 6 2011) Harmattan

Picked ape-algo from a FIASCO file
Device is in Sync and connect mode, sending ADL reboot.
ERROR: ReadFile(65540) GetOverlappedResult() error 1167 timeout 4975 ms
Unable to detect flashing interface: standing by for device reboot.
Suitable USB interface (bootloader) not found, waiting...
Found device RM-696, hardware revision 1603
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_40.2012.21-3_PR_009
Sending ape-algo image (7096 kB)...
100% (7096 of 7096 kB, avg. 12627 kB/s)
Suitable USB interface (phonet) not found, waiting...
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1603
Server implements softupd protocol version 1.8
Image SW version <none>
Image cert-sw not present
Image cmt-2nd skipped
Image cmt-algo skipped
Image cmt-mcusw skipped
Image xloader skipped
Image secondary skipped
Image moslo skipped
Image rootfs skipped
Image mmc skipped
Image tar skipped
Image config skipped

Battery level 96 %, continuing.

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] kernel [finished 100 % 2793 / 2793 kB 2044 kB/s]
Updating SW release
Success

Re: Can anybody give me a hand? :) Might pay £20 via paypal if you do a good job ;)
 

--suppress-warranty-warning parameter does not do anything, it was put there just as a joke for dummies :)

What you need to do to get rid of the warranty warning, is 1st flash to official full image, install developer mode, login as developer, then devel-su and then run "disclaimer-cal remove View-openmode", after that you can use flasher to flash kernel, and voila, you dont have warranty warning screen.

Re: Can anybody give me a hand? :) Might pay £20 via paypal if you do a good job ;)
 

Here you are :)
I entered the #disclaimer-cal remove View-openmode but is giving me error like: CAL ERROR: nand_write (4096 bytes at around 00209000): Input/output error
disclaimer -cal: failed to write to CAL

Re: Can anybody give me a hand? :) Might pay £20 via paypal if you do a good job ;)
 

yes that command will fail if you don't do full reflash to normal image 1st. CAL is only writable after full "flasher -f -F main.bin -R" command. If you do any other flasher parameter combinations, then the command will not work.

Re: Can anybody give me a hand? :) Might pay £20 via paypal if you do a good job ;)
 

You mean 1st, to flash org fw
then developer to activate and then command #disclaimer-cal remove View-openmode, then flashing zimage as a last one, is it? :)

I use this comand to flash my device on winxpsp3:
C:/Nokia/Flasher/flasher.exe -F c:/nokia/flasher/DFL61_HARMATTAN_40.2012.21-3_PR_LEGACY_009-OEM1-958_ARM.bin -f


Great Rainisto, i think is working, thank you very much. :)