Re: Nokia N9-00 Prototype Build B1.1 (RM-680 codename "Dali")
 

Can you list the files ? does it mount ?

Re: Nokia N9-00 Prototype Build B1.1 (RM-680 codename "Dali")
 

One for headphone and other for jack but in others nokia n950 is there any dc jack?

Re: Nokia N9-00 Prototype Build B1.1 (RM-680 codename "Dali")
 

I don't think so, I think it's just there because it was design or made right after the last N Series (N8 had it, don't know about E7). I think this might be one of the earliest N950 prototypes then..

Re: Nokia N9-00 Prototype Build B1.1 (RM-680 codename "Dali")
 

I have mounted all 3 parts but nothing rare inside.
I think its a fresh install corrupted.
is it better to reflash with last PR1.3?

thanks

Re: Nokia N9-00 Prototype Build B1.1 (RM-680 codename "Dali")
 

I have a problem now,

flasher -f -F PR1.3.bin

and here my error:

http://hpics.li/ff52aa2

how can i do?

Re: Nokia N9-00 Prototype Build B1.1 (RM-680 codename "Dali")
 

The 'bb5_rdc_cert_read failed' error?

Also, you could try the guide.

[Edit]
Oh, it may be that your file is corrupted aka unreadable.
[/Edit]

I have not met the error, yet.

Best wishes.

Re: Nokia N9-00 Prototype Build B1.1 (RM-680 codename "Dali")
 

My file isn't corupt.
I need to remove device Look ON and put OFF before flash but how can i do? what command line with flasher please

Re: Nokia N9-00 Prototype Build B1.1 (RM-680 codename "Dali")
 

@rzr Actually rm-696 is the N9 (Lankku) and N950 (both prototype and developer device) is rm-680.

Re: Nokia N9-00 Prototype Build B1.1 (RM-680 codename "Dali")
 

I try this command:

flasher -f -F pr13.bin --erase-user-data=secure (overnight... I hope so...)
How many hours if somebody tested it for full erase?

When it will be finished i will let you know.

thanks.

Re: Nokia N9-00 Prototype Build B1.1 (RM-680 codename "Dali")
 

Hi,

Here is my error:

ubuntu@ubuntu:~$ sudo flasher -f -F /home/ubuntu/Téléchargements/13.bin --erase-user-data=secure
flasher 3.12.1 (Oct 5 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

USB device found at bus 001, device address 011.
Device identifier:
Raw data transfer EP found at EP2.
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-680 rev. 0521
Server implements softupd protocol version 1.8

Battery level 91 %, continuing.
Erasing, this may take a while.
ERROR: SU_BEGIN_ERASE_REQ terminated with error code 10: Security failure
Fetching error list:
========================================
bb5_esn_init failed
bb5_rdc_cert_verify_failed
Could not read devicelock
bb5_rdc_cert_verify_failed
Could not read devicelock
bmeipc_open failed
Could not read battery level
bb5_rdc_cert_verify_failed
Could not read devicelock
bb5_rdc_cert_verify_failed
Could not read devicelock
bb5_rdc_cert_verify_failed
Could not read devicelock
bb5_rdc_cert_verify_failed
Could not read devicelock
bb5_rdc_cert_verify_failed
Could not read devicelock
bb5_rdc_cert_verify_failed
Could not read devicelock
ioctl(BLKSECDISCARD) failed for /tmp/sudmmcq8iCLG/internal0: Operation not supported
Erase successful but could not reset device lock


How can i do?