maemo.org - Talk
Page 2 of 7 1 2 34 Last »
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   Maemo 5 / Fremantle (https://talk.maemo.org/forumdisplay.php?f=40)
-   -   PR1.1 Feedback? (https://talk.maemo.org/showthread.php?t=40428)

juaalto 2010-01-14 10:47
Re: PR1.1 Feedback?
 
Quote:
Originally Posted by Master of Gizmo (Post 470211)
I had that installed previously and yes, i noticed that the vpnc package added something to the script. This may have prevented the script from being updated.

Would someone who has updated his machine be so kind to put his
/etc/udhcpc/libicd_network_ipv4.script somewhere so i can compare them?
Assuming now that your problem is caused by the vpnc_0.5.8-0m5_armel.deb package installed before upgrade to PR1.1 over SSU. You can either reflash with PR 1.1 and reinstall vpnc or you could try following manual steps. Please report if they work:

1. Install 'rootsh' package
2. Open X Terminal
3. Enter 'sudo gainroot'
4. Enter 'mv /etc/udhcpc/libicd_network_ipv4.script.dpkg-dist /etc/udhcpc/libicd_network_ipv4.script'
5. Create file '/etc/maemo-dhcp.d/60_vpnc'
6. Add the following code in /etc/maemo-dhcp.d/60_vpnc:

Code:
#!/bin/sh -e
if route -n | grep -e "^0\.0\.0\.0" | grep -q tun0; then
    route -n | grep -e "^0\.0\.0\.0" | grep $interface | awk '{print $2}' > /tmp/vpnc_route
    ip=`cat /var/run/vpnc/defaultroute | cut -f3 -d' '`
    if [ -z $ip ]; then
        killall vpnc
    else
        if route -n | grep -e "^0\.0\.0\.0" | grep -q $ip; then
            route delete default $interface
        fi
    fi
fi
7. In X Terminal enter 'chmod +x /etc/maemo-dhcp.d/60_vpnc'
8. Reboot the device

You need steps 5-7 if you want to continue using you old vpnc installation. Another way is to reinstall vpnc which reinstalls the hack in file '/etc/udhcpc/libicd_network_ipv4.script'

horus 2010-01-14 10:48
Re: PR1.1 Feedback?
 
The link to the Ovi store from the application menu now works. Hoo-rah!

hstende 2010-01-14 10:52
Re: PR1.1 Feedback?
 
My wlan now works after first uninstalling vpnc and then

cp /etc/udhcpc/libicd_network_ipv4.script.dpkg-dist /etc/udhcpc/libicd_network_ipv4.script

Master of Gizmo 2010-01-14 10:53
Re: PR1.1 Feedback?
 
Quote:
Originally Posted by chrget (Post 470233)
Mine says:

Code:
#!/bin/sh
# Place your script to /etc/maemo-dhcp.d directory so that it gets run.

run-parts -a "$1" /etc/maemo-dhcp.d
Hope this helps,

Chris.
That's /etc/udhcpc/libidc_network_ipv4.script.dpkg-dist and not /etc/udhcpc/libidc_network_ipv4.script

Doesn't the latter exist at all on your device?

Edit: The part i was missing was the fact that the dpkg-dist file seems to be the one that's created if the original one has been modified and is thus not touched by dpkg.

qwerty12 2010-01-14 10:57
Re: PR1.1 Feedback?
 
Quote:
Originally Posted by Master of Gizmo (Post 470204)
/etc/resolv.conf doesn't even need to contain anything.
Yes, it does. The N900 runs udhcpc for a reason.

Mine says "nameserver 127.0.0.1".

Slunge 2010-01-14 10:58
Re: PR1.1 Feedback?
 
I updated to PR 1.1 today (after clearing some extra applications to make room)

After the update i have several problems:

- I cant connect to my MSN and OVI chat accounts
it says netword fault (but then in dutch)
- I cant open any of the catalogues on the apps installer.
all catalogues or not available...they were before the update tho..
- Intenal gps not connecting

Can someone help me with this?

Master of Gizmo 2010-01-14 10:58
Re: PR1.1 Feedback?
 
Quote:
Originally Posted by juaalto (Post 470288)
You can either reflash with PR 1.1 and reinstall vpnc or you could try following manual steps. Please report if they work:

1. Install 'rootsh' package
2. Open X Terminal
3. Enter 'sudo gainroot'
4. Enter 'mv /etc/udhcpc/libicd_network_ipv4.script.dpkg-dist /etc/udhcpc/libicd_network_ipv4.script'
5. Create file '/etc/maemo-dhcp.d/60_vpnc'
6. Add the following code in /etc/maemo-dhcp.d/60_vpnc:

Code:
#!/bin/sh -e
if route -n | grep -e "^0\.0\.0\.0" | grep -q tun0; then
    route -n | grep -e "^0\.0\.0\.0" | grep $interface | awk '{print $2}' > /tmp/vpnc_route
    ip=`cat /var/run/vpnc/defaultroute | cut -f3 -d' '`
    if [ -z $ip ]; then
        killall vpnc
    else
        if route -n | grep -e "^0\.0\.0\.0" | grep -q $ip; then
            route delete default $interface
        fi
    fi
fi
7. In X Terminal enter 'chmod +x /etc/maemo-dhcp.d/60_vpnc'
8. Reboot the device
I didn't have vpnc installed anymore, so i omitted steps 5-7. But the remaining hints fixed the problem. Is pkg-dist the name dpkg uses if it finds the original file modified and doesn't want to touch it?

Master of Gizmo 2010-01-14 10:59
Re: PR1.1 Feedback?
 
Quote:
Originally Posted by qwerty12 (Post 470312)
Yes, it does. The N900 runs udhcpc for a reason.

Mine says "nameserver 127.0.0.1".
But it also works if it doesn't. Mine is empty and everything is fine again.

jcnielsen 2010-01-14 13:42
Re: PR1.1 Feedback?
 
I can't connect to pc-suite anymore after I updated my N900.

jcompagner 2010-01-14 14:00
Re: PR1.1 Feedback?
 
Calendar is way faster
Modest is faster (but i still think that it could improve, sometimes gmail inbox is there within a second other times it takes 4)
Browses has basic portrait support (people really shouldnt count on full ui (== desktop) portrait support for Maemo 5! This will be per app)
it dont see MicroB as that quicker currently.. But it has 1 annoying feature now.. when i go to this site or for example my-symbian and then i zoom in to click the small new post picture, it goes to that next page to the new post but in the zoom level i am in, it doesnt zoom out first, thats quite annoying..

Lost 10MB in root.

x61 2010-01-14 14:10
Re: PR1.1 Feedback?
 
#646# still shows "Incorrect number". I thought this problem was to be fixed in the new FW update.

juise- 2010-01-14 14:10
Re: PR1.1 Feedback?
 
Everything seems to be working nice and smooth after the update.

Except for...

I have a couple of videos (encoded using HandBrake) that used to work with the Media Player before update, but won't play anymore. The player will just keep bouncing the 5 dots progress indicator back and forth indefinitely (or at least the few minutes I waited).

The videos that came pre-installed with the device, and videos recorded with device camera still work though.

jcnielsen 2010-01-14 14:13
Re: PR1.1 Feedback?
 
Quote:
Originally Posted by jcnielsen (Post 470779)
I can't connect to pc-suite anymore after I updated my N900.
Worked again after I connected the N900 with an inserted SIM-card.

vietn900 2010-01-14 14:21
Re: PR1.1 Feedback?
 
Well im glad to hear that no big issues just yet :) ... im just happy they fix a lot of bugs ... well still waiting for my phone to finish updating. I'm still waiting for these main features:

MMS
OVi map 3.0
Portrait mode

Sadavyk 2010-01-14 14:27
Re: PR1.1 Feedback?
 
WTF i not sure if i want to update after read all the sad issue
or maybe this should be called a failware :)

x61 2010-01-14 14:30
Re: PR1.1 Feedback?
 
What happened to the USSD that was said to be FIXED in the PR1.1?

harryw 2010-01-14 14:35
Re: PR1.1 Feedback?
 
Worked fine for me (both vpn and non-vpn DNS) - even without the reboot (just disconnected & reconnected)

referring to juaalto's vpnc fix here

Thanks

mikec 2010-01-14 14:36
Re: PR1.1 Feedback?
 
Improvements

1.Mp4 Vids recorded from my Cannon Camera now working nice. B4 it would stutter and sound out of sync

2 Modest IMAP4 in box near instantaneous now on my Gmail account

3 Bluetooth a2dp music palyback no longer stutters while surfing
4. Ovi Maps much faster

5 Desktop feels snappier

Yay

Mike C

seiichiro0185 2010-01-14 14:36
Re: PR1.1 Feedback?
 
Quote:
Originally Posted by x61 (Post 470924)
What happened to the USSD that was said to be FIXED in the PR1.1?
If I read the bugreport corectly they only enabled some USSD-Codes (e.g. *#06# for IMEI works). Seems to me they have a list of allowed code and anything thats not in there still gets the error (e.g. *121# for showing my active MultiSIM cards).

read here for more info: bugreport

CormacB 2010-01-14 14:44
Re: PR1.1 Feedback?
 
I had some scary moments after doing an apt-get dist-upgrade, but it all worked out in the end. The main thing I have noticed is MicroB seems to be much faster at rendering! Much less scrolling then waiting for it to catch up. I didn't expect that to be fixed as I thought it was pretty much the limits of the device.

x61 2010-01-14 14:52
Re: PR1.1 Feedback?
 
Quote:
Originally Posted by seiichiro0185 (Post 470949)
If I read the bugreport corectly they only enabled some USSD-Codes (e.g. *#06# for IMEI works). Seems to me they have a list of allowed code and anything thats not in there still gets the error (e.g. *121# for showing my active MultiSIM cards).

read here for more info: bugreport
No. Fixing *#06# to check the IMEI is useless particularly since you can check the IMEI from settings-> about.

The bug fix that I am referring to is here. It says it is FIXED. But apparently, it is not included in this firmware update.

seiichiro0185 2010-01-14 15:01
Re: PR1.1 Feedback?
 
you are right, it says fixed but is not included, as last comment also says..

chrget 2010-01-14 15:15
Re: PR1.1 Feedback?
 
Quote:
Originally Posted by chrget (Post 470250)
Is it just me, or has WiFi power management been put into a very aggressive mode now, powering down after milliseconds and leading to packets being dropped and the device essentially becoming unresponsive (network-wise, not the entire device!) after a few seconds, unless network traffic is being kept up at a rather high rate?
Quoting myself here ... seems that this bug has bitten me. Anybody else?

Regards,

Chris.

Blackbeard 2010-01-14 15:18
Re: PR1.1 Feedback?
 
I am very happy about the update. Since my old E51 did not support OTA and conserving user data I found the Maemo update to be extremely user friendly in that sense. I see also that many small bugs are gone and the overall responsiveness is better.

I noticed a small wierdness though. I have a mpg video on SD and while the media player played it before the update that is not the case anymore. I do have Extra Decoders Support installed (and upgraded it from extras-testing) it but still no luck. This is not a big problem since mplayer plays the file but still wondering reason for this. The video is mpeg1 encapsulated in mpeg-ps.

ZackMorris 2010-01-14 15:20
Re: PR1.1 Feedback?
 
Quote:
Originally Posted by jsomby (Post 470114)
MfE 2003 is now working and noticed new light blue led blinking if display is off, nice. Feature or am i missing something?

Also my update didnt go well. Had to flash device with older firmware and then do the update process again without any other software installed.
Apparently after the update all the notification lights are turned back on. I had all but sms on mine off prior to update. Go to Settings>Notification Lights and choose the ones you want.

mooninite 2010-01-14 15:21
Re: PR1.1 Feedback?
 
Guys, you lose ~10 megs in root because there are more QT libraries installed (ick).

I couldn't OTA update until I removed ioquake3. I had 65 megs of free space, after starting with 22, and I was about to give up until I saw other people removed ioquake3 and it worked, and it did for me, too.

soleil 2010-01-14 15:21
Re: PR1.1 Feedback?
 
My rootsfs is at 64% occupied befor the update but now is 76%

heretic 2010-01-14 15:23
Re: PR1.1 Feedback?
 
the bug, battery died in 6 hours isn't fixed. in other words, same as before. if you ever turned wifi on then switch it off without reboot, all the power is still consumed within several hours.

lfcobra 2010-01-14 15:28
Re: PR1.1 Feedback?
 
If you have a modified camera shutter sound file, after updating to pr 1.1 the original sound file is restored, so you'll have to change it again.

As one of the previous posters noted, some videos that played fine before the update now have issues. The sound will play just fine but the video is stuck on the first frame of the video file. I suspect its a video codec issue.

Other than that everything seem much the same. Portrait browsing is a nice plus.

tissot 2010-01-14 15:30
Re: PR1.1 Feedback?
 
Quote:
Originally Posted by heretic (Post 471074)
the bug, battery died in 6 hours isn't fixed. in other words, same as before . if you ever turned wifi on and switch it off without reboot, all the power is still consumed within several hours.
I don't have probs with this. Are you sure you don't have some app doing this or something similar?

messus 2010-01-14 15:36
Re: PR1.1 Feedback?
 
As I suspected with Full Portrait Mode !! I was waiting for FULL portrait mode as this has been written several places on the web !! Anyway portrait mode is not working well, and MS Exchange Server 2003 support is still not working for me (so all my colleagues with iPhones and Nokia N95/82s are capable of syncing their jobmails, but still no me!)..

Anyway, would be REALLY nice to get a proper FINAL conclusion if FULL portrait mode is coming for the N900 from some official sources so that I know how soon I have to sell my N900 to still get some money back for it !! (or not)

Where can we ask for a final answer about Full Portrait Mode??

I do not want to cary around this device if full portrait mode is not coming!!!

jerden69 2010-01-14 15:39
Re: PR1.1 Feedback?
 
Everything seems a little faster which is great! but does anyone know if this fixes the random restart problem? I have the pmconfig file changed so now that its updated can i change the pmconfig file back to normal?

x61 2010-01-14 15:46
Re: PR1.1 Feedback?
 
Quote:
Originally Posted by messus (Post 471106)
As I suspected with Full Portrait Mode !! I was waiting for FULL portrait mode as this has been written several places on the web !! Anyway portrait mode is not working well, and MS Exchange Server 2003 support is still not working for me (so all my colleagues with iPhones and Nokia N95/82s are capable of syncing their jobmails, but still no me!)..

Anyway, would be REALLY nice to get a proper FINAL conclusion if FULL portrait mode is coming for the N900 from some official sources so that I know how soon I have to sell my N900 to still get some money back for it !! (or not)

Where can we ask for a final answer about Full Portrait Mode??

I do not want to cary around this device if full portrait mode is not coming!!!
Lol. Son, there is nothing like FuLL portrait mode coming to N900. If you want the portrait mode, sell the device and buy the iphone or wait for the maemo 6 device (which may contain portrait mode).

tissot 2010-01-14 15:47
Re: PR1.1 Feedback?
 
Quote:
Originally Posted by messus (Post 471106)
I do not want to cary around this device if full portrait mode is not coming!!!
I'm sorry, but i'm 90% sure that it won't ever happen. It was too bad that some who reviewed N900 said so. We got the portrait browser that was said to be coming by Nokia, that's all.
That 10% i left there would be if we can update N900 to run Maemo 6/harmattan that gets released this year.

Rumour is that next major update for N900 is in March/April with Qt 4.6.

ralnaghi 2010-01-14 15:53
Re: PR1.1 Feedback?
 
after upgrading the firmware and checking the version I get

2.2009.51-1.003

is this the right upgrade?

also does anyone know if this upgrade will fix the phone book sync over bluetooth while using a car kit?

thx

colnago 2010-01-14 16:02
Re: PR1.1 Feedback?
 
Quote:
Originally Posted by ralnaghi (Post 471144)
after upgrading the firmware and checking the version I get

2.2009.51-1.003

is this the right upgrade?

also does anyone know if this upgrade will fix the phone book sync over bluetooth while using a car kit?

thx
Did you try sync via the Petrovich app? Worked fine for my Pioneer AVIC.

bandora 2010-01-14 16:07
Re: PR1.1 Feedback?
 
I thought that codes that starts with *# will be fixed on this build.. But I guess not.. :(

Oh well it's not a biggie..

But I noticed that MicroB is SO much faster in loading pages now.. x-term gets a new icon too.. :p

Ok and qgil I know that you guys said that full portrait for the UI is coming in Maemo 6.. But can you at least meet us in the middle on this? Can you guys at least add portrait mode for:

- Conversations.

- Media Player (only when playing songs).

- and finally add a T9 keyboard option to the virtual keyboard? (just like the s60v5 ones?) for MicroB. (T9 Keyboard only detected when the N900 is turned into portrait mode, other-wise it only shows the normal, current, keyboard layout).

ralnaghi 2010-01-14 16:11
Re: PR1.1 Feedback?
 
Quote:
Originally Posted by colnago (Post 471178)
Did you try sync via the Petrovich app? Worked fine for my Pioneer AVIC.
Did try that (select contacts) send via bluetooth, didn't work :(

I have a BMW 2009 and I'm using the manufacturer's built in car kit. Used to work fine with all my previous nokias N97, E90, etc...

Jimus 2010-01-14 16:15
Re: PR1.1 Feedback?
 
Quote:
Originally Posted by mece (Post 470021)
The widget only shows next 2 weeks. It was a bug that displayed some events far in the future before.
Really? Seems like a step backwards to me. Showing the next 5 events, regardless of when they are would be my preferred behaviour.

messus 2010-01-14 16:15
Re: PR1.1 Feedback?
 
Quote:
Originally Posted by x61 (Post 471126)
Lol. Son, there is nothing like FuLL portrait mode coming to N900. If you want the portrait mode, sell the device and buy the iphone or wait for the maemo 6 device (which may contain portrait mode).
Laugh all you want!!

F#¤"!"ing stupid with no portrait mode on a smartphone unit !!

Preparing my N900 for sale.. And by reading this forum it is pretty obvious I am not alone about this portrait issue!!

Thanks for your reply, I guess it may be difficult to get something from any official source about this..


All times are GMT. The time now is 22:16.
Page 2 of 7 1 2 34 Last »
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8