maemo.org - Talk - [updated] NITdroid 0.0.8 HOWTO Install *assuming you've used autoinstaller*

Page 2 of 4

Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)

- Alternatives (https://talk.maemo.org/forumdisplay.php?f=36)

- - [updated] NITdroid 0.0.8 HOWTO Install *assuming you've used autoinstaller* (https://talk.maemo.org/showthread.php?t=61896)

fahadj2003

2010-09-08 06:59

Re: [updated] NITdroid 0.0.8 HOWTO Install *assuming you've used autoinstaller*

Quote:

Originally Posted by ryanl33x1511 (Post 810283)

i had a same problem like u..right the moment edit APN then save..i got X bar then kick into airplanemode .....

anyone figured it out?

horrorschow

2010-09-08 07:48

Re: [updated] NITdroid 0.0.8 HOWTO Install *assuming you've used autoinstaller*

so could anyone post an complete installguide (which is working)?

fahadj2003

2010-09-08 08:23

Re: [updated] NITdroid 0.0.8 HOWTO Install *assuming you've used autoinstaller*

Quote:

Originally Posted by horrorschow (Post 810364)

so could anyone post an complete installguide (which is working)?

its complete and it works
the difference is with the n900 i guess
the installation is perfect
if ure lucky, u wont end up in airplane mode
but feel free to search around..
and if u find a solution for aircraft mode, post it here

Beatty

2010-09-08 09:56

Re: [updated] NITdroid 0.0.8 HOWTO Install *assuming you've used autoinstaller*

Quote:

Originally Posted by fahadj2003 (Post 810385)

Ended up in airplane mode too... Got it out of airplane mode following
http://www.nitdroid.com/index.php?ti...le_flight_mode

but this seems to take you back to the very beginning again (ie. lost my apps, settings etc.)

gurbir

2010-09-08 10:34

Re: [trash this] NITdroid 0.0.8 HOWTO Install *assuming you've used autoinstaller*

hey bro i got an error while downloadind
wget http://downloads.nitdroid.com/e-yes/...-Popov.tar.bz2

when i write that cmd it says 404 error not found

gurbir

2010-09-08 10:37

Re: [updated] NITdroid 0.0.8 HOWTO Install *assuming you've used autoinstaller*

hi dj steve .... i appreciate ur work
could u plz tell me how to install the new updated in simple steps ...i had previous ver. of nitroid.

mornage

2010-09-08 10:43

Re: [updated] NITdroid 0.0.8 HOWTO Install *assuming you've used autoinstaller*

For anyone having an issue with the APN and airplane mode, please see http://forum.nitdroid.com/index.php?...sg1661#msg1661

Beatty

2010-09-08 10:44

Re: [trash this] NITdroid 0.0.8 HOWTO Install *assuming you've used autoinstaller*

Quote:

Originally Posted by gurbir (Post 810477)

hey bro i got an error while downloadind
wget http://downloads.nitdroid.com/e-yes/...-Popov.tar.bz2

when i write that cmd it says 404 error not found

downloads.nitdroid.com/e-yes/NitDroid-0.0.8-Popov.tar.bz2

isardor

2010-09-08 10:59

Re: [updated] NITdroid 0.0.8 HOWTO Install *assuming you've used autoinstaller*

I did it, and it's booting in 0.0.8 now.
That's nice, so long.

BUT it doesn't recocnize my SIM Card. Any idear about that?

Omega180984

2010-09-08 11:27

Re: [updated] NITdroid 0.0.8 HOWTO Install *assuming you've used autoinstaller*

Disabling pin code alows to conect to the network:) You have to do it in maemo and reboot. Finisch ;)

dj_steve

2010-09-08 12:35

Re: [updated] NITdroid 0.0.8 HOWTO Install *assuming you've used autoinstaller*

the nitdroid installer will now install this version, have tested and works here

fahadj2003

2010-09-08 13:32

Re: [updated] NITdroid 0.0.8 HOWTO Install *assuming you've used autoinstaller*

Quote:

Originally Posted by dj_steve (Post 810580)

the nitdroid installer will now install this version, have tested and works here

yay!!!
lol

OptX	2010-09-08 13:36

Re: [updated] NITdroid 0.0.8 HOWTO Install *assuming you've used autoinstaller*

Quote:

Originally Posted by Omega180984 (Post 810514)

Disabling pin code alows to conect to the network:) You have to do it in maemo and reboot. Finisch ;)

How is that done ?

fuyoh

2010-09-08 13:47

Re: [updated] NITdroid 0.0.8 HOWTO Install *assuming you've used autoinstaller*

i dont really get this...

so the front guide is for SD

how do i install nitdroid at internal memory ?

fahadj2003

2010-09-08 14:27

Re: [updated] NITdroid 0.0.8 HOWTO Install *assuming you've used autoinstaller*

Quote:

Originally Posted by fuyoh (Post 810645)

i dont really get this...

so the front guide is for SD

how do i install nitdroid at internal memory ?

i dont know why everyone keeps asking me this.. :|

fuyoh

2010-09-08 14:40

Re: [updated] NITdroid 0.0.8 HOWTO Install *assuming you've used autoinstaller*

Quote:

Originally Posted by fahadj2003 (Post 810687)

i dont know why everyone keeps asking me this.. :|

well, just being excited as the changelog says the nitdroid can be installed in emmc.

olympus

2010-09-08 15:04

Re: [updated] NITdroid 0.0.8 HOWTO Install *assuming you've used autoinstaller*

Quote:

Originally Posted by fahadj2003 (Post 810152)

*THIS IS FOR SD, NOT EMMC*
*WORKS PROPERLY*

1)http://forum.nitdroid.com/index.php?topic=315.0 <---- download 0.0.8 version

2)copy the file to emmc via mass storage mode

3)disconnect from mass storage

4) open xterm

sudo gainroot
mkfs.ext3 /dev/mmcblk1p2
mount /dev/mmcblk1p2 /and
cd /and
tar xvf /home/user/MyDocs/NitDroid-0.0.8-Popov.tar.bz2
dpkg -i /home/user/MyDocs/.nitdroid/nitdroid-kernel-2.6.28-06_final1_armel.deb

some have issues with the tar file
"tar: invalid tar magic"
use this as 4th step

open xterm

sudo gainroot
mkfs.ext3 /dev/mmcblk1p2
mount /dev/mmcblk1p2 /and
cd /and
bunzip2 /home/user/MyDocs/NitDroid-0.0.8-Popov.tar.bz2
tar xvf /home/user/MyDocs/NitDroid-0.0.8-Popov.tar
dpkg -i /home/user/MyDocs/.nitdroid/nitdroid-kernel-2.6.28-06_final1_armel.deb

*thanks to http://talk.maemo.org/showpost.php?p...9&postcount=23

does no one say thanks anymore?

So i followed this steps and now my n900 won't boot up.. and because i'm an idiot i don't have a backup. Is there anything i can do or is reflash the only way?

fahadj2003

2010-09-08 15:31

Re: [updated] NITdroid 0.0.8 HOWTO Install *assuming you've used autoinstaller*

Quote:

Originally Posted by fuyoh (Post 810705)

well, just being excited as the changelog says the nitdroid can be installed in emmc.

ughhhh...
ask that on the nitdroid forums then please..

and other guy, what exactly were the steps that u took?
and did u have older version of nitdroid installed?
and "wont boot up" is kinda sketchy.. details please?

agdroubi

2010-09-08 15:45

Re: [updated] NITdroid 0.0.8 HOWTO Install *assuming you've used autoinstaller*

will it be available as an update in maemo on the application manager???

olympus

2010-09-08 15:50

Re: [updated] NITdroid 0.0.8 HOWTO Install *assuming you've used autoinstaller*

Quote:

Originally Posted by fahadj2003 (Post 810753)

I did this:

1)http://forum.nitdroid.com/index.php?topic=315.0 <---- download 0.0.8 version

2)copy the file to emmc via mass storage mode

3)disconnect from mass storage

4) open xterm
sudo gainroot
mkfs.ext3 /dev/mmcblk1p2
mount /dev/mmcblk1p2 /and
cd /and
bunzip2 /home/user/MyDocs/NitDroid-0.0.8-Popov.tar.bz2
tar xvf /home/user/MyDocs/NitDroid-0.0.8-Popov.tar
dpkg -i /home/user/MyDocs/.nitdroid/nitdroid-kernel-2.6.28-06_final1_armel.deb

So then i rebooted and the device just shut down. Now if i press the power button it vibrates, shows NOKIA logo and then shuts down again.

and yes i had nitdroid 0.0.7 installed with autoinstaller..

fahadj2003

2010-09-08 16:12

Re: [updated] NITdroid 0.0.8 HOWTO Install *assuming you've used autoinstaller*

Quote:

Originally Posted by olympus (Post 810776)

is ur battery full?
otherwise u can flash the kernel..
u dun need to flash the full firmware
http://rapidshare.com/files/41787469...2.6.28-maemo40
flasher-3.5 -l -b -k <kernel>
you can say thanks
this is temp btw.. it jus loads the kernel so that u can find out what u did wrong..
but if u wanna flash it, replace the -l with -f
btw, check the battery first..
i think thats the issue

olympus

2010-09-08 16:19

Re: [updated] NITdroid 0.0.8 HOWTO Install *assuming you've used autoinstaller*

nope, the battery is not the issue, i had 81% before i rebooted.. i'll try your first advice, thanks for now.

Deaconclgi

2010-09-08 16:27

Re: [updated] NITdroid 0.0.8 HOWTO Install *assuming you've used autoinstaller*

Quote:

Originally Posted by dj_steve (Post 810580)

the nitdroid installer will now install this version, have tested and works here

Hello dj_steve,

Are you going to update the post on http://forum.nitdroid.com/index.php?topic=315.0 to show that the installer works with 0.0.08 now?

I may update this afternoon. Spotty 3G coverage inside the school....and crazy secure Hidden Wifi......

Thank you and your team for all of the work on NITDroid

Bobbe

2010-09-08 16:31

Re: [updated] NITdroid 0.0.8 HOWTO Install *assuming you've used autoinstaller*

Quote:

Originally Posted by fahadj2003 (Post 810152)

*THIS IS FOR SD, NOT EMMC*
*WORKS PROPERLY*
(...)

You should probably mention this is only for those who have already installed nitdroid-installer before.

fahadj2003

2010-09-08 16:43

Re: [updated] NITdroid 0.0.8 HOWTO Install *assuming you've used autoinstaller*

Quote:

Originally Posted by Bobbe (Post 810818)

You should probably mention this is only for those who have already installed nitdroid-installer before.

ughhh
i think thats the heading of the post
"[updated] NITdroid 0.0.8 HOWTO Install ****assuming you've used autoinstaller*****

i mean cmon.. if ppl cant even read the full thing, then only god can help them..

rolan900d

2010-09-08 16:57

Re: [updated] NITdroid 0.0.8 HOWTO Install *assuming you've used autoinstaller*

After installation, can we delete that Nitdroid-0.0.8-Popov.tar.bz2 wich I dropped in /home/user/MyDocs ???

Thanks for the update folks!

peynaud

2010-09-08 17:12

Re: [updated] NITdroid 0.0.8 HOWTO Install *assuming you've used autoinstaller*

What wifi speeds are you getting under nitdroid 0.0.8?

It's taking me like 3 hours to download a 6Mb file.

What do you think is my problem? I was getting great speeds in 0.0.7.

fahadj2003

2010-09-08 17:13

Re: [updated] NITdroid 0.0.8 HOWTO Install *assuming you've used autoinstaller*

Quote:

Originally Posted by rolan900d (Post 810836)

After installation, can we delete that Nitdroid-0.0.8-Popov.tar.bz2 wich I dropped in /home/user/MyDocs ???

Thanks for the update folks!

yes u can

other guy, dunno
i think its the airplane mode?
im not using nitdroid atm

rolan900d

2010-09-08 17:20

Re: [updated] NITdroid 0.0.8 HOWTO Install *assuming you've used autoinstaller*

Quote:

Originally Posted by fahadj2003 (Post 810848)

yes u can

other guy, dunno
i think its the airplane mode?
im not using nitdroid atm

Thanks....
Was that airplane mode answer for me?
I didn't get it...

Still have to read the official chnagelog, but the wifi setup won't work for me...
It takes more than 10 min. already?!

olympus

2010-09-08 17:30

Re: [updated] NITdroid 0.0.8 HOWTO Install *assuming you've used autoinstaller*

Quote:

Originally Posted by fahadj2003 (Post 810798)

so i flashed with this temp kernel and it looked promissing, the 5 dots we're flashing on the screen and i thought that i was saved but then the device turned off once again before maemo loaded up. i tried it a couple more times but every time the same result. any other suggestions maybe? thanks in advance!

fahadj2003

2010-09-08 17:31

Re: [updated] NITdroid 0.0.8 HOWTO Install *assuming you've used autoinstaller*

Quote:

Originally Posted by rolan900d (Post 810851)

Thanks....
Was that airplane mode answer for me?
I didn't get it...

Still have to read the official chnagelog, but the wifi setup won't work for me...
It takes more than 10 min. already?!

yea it was for u
try restarting ur cellphone
and many peeps cant use cellular data coz of the airplane mode..
and cant find the fix either

fahadj2003

2010-09-08 17:42

Re: [updated] NITdroid 0.0.8 HOWTO Install *assuming you've used autoinstaller*

Quote:

Originally Posted by olympus (Post 810858)

the flasher command i gave u..
try -f instead of -l
and dont open the keyboard
otherwise the kernel i uploaded was titans -40 kernel
this is the stock one
http://rapidshare.com/files/41789029...z-2.6.28-omap1
try flashing this

agdroubi

2010-09-08 18:17

Re: [updated] NITdroid 0.0.8 HOWTO Install *assuming you've used autoinstaller*

i didn't get any update eventhough when i try to run it from x-terminal it says nitdroid installer is in the latest version??? if i write nitdroid it will run a hazard if i answered yes will it download the new version or it will overwrite the old one???

fahadj2003

2010-09-08 18:33

Re: [updated] NITdroid 0.0.8 HOWTO Install *assuming you've used autoinstaller*

Quote:

Originally Posted by agdroubi (Post 810895)

i lost u man
what?
if u have nitdroid *old one* already installed, then follow the instructions.. GOD

Deaconclgi

2010-09-08 18:39

Re: [updated] NITdroid 0.0.8 HOWTO Install *assuming you've used autoinstaller*

Incase anyone missed it. You CAN use the NITDroid installer now. Open xterm, type nitdroid and press enter just as you did before! You do NOT have to install the new version manually anymore. Use the NITDroid Installer.

I just installed version 0.0.8 with the installer and I am currently using Android over Tmobile 3G. I no longer have to wait until I get home to browse the Android Market! Nice!

rolan900d

2010-09-08 18:56

Re: [updated] NITdroid 0.0.8 HOWTO Install *assuming you've used autoinstaller*

Quote:

Originally Posted by fahadj2003 (Post 810859)

yea it was for u
try restarting ur cellphone
and many peeps cant use cellular data coz of the airplane mode..
and cant find the fix either

Thanx...
I fixed it!
The airplane mode was automatically ticked in my case...
That was the cause of the issues

jamie721

2010-09-08 19:05

Re: [updated] NITdroid 0.0.8 HOWTO Install *assuming you've used autoinstaller*

can any body help me i cant seem to format the sd card. at stage mkfs.ext3 /dev/mmcblk1p2 i get the message /dev/mmcblk1p2 is not a block special device. proceed any way so i say yes. then it says /dev/mmcblk1p2: not enough space to build proposed filesystem while setting up super block.

also auto installer hangs at the formating of the same device.

Clubberlang

2010-09-08 19:38

Re: [updated] NITdroid 0.0.8 HOWTO Install *assuming you've used autoinstaller*

I am unable to see NitDroid at all in Extras-devel. :( Anyone know why?

Missingbyte

2010-09-08 19:42

Re: [updated] NITdroid 0.0.8 HOWTO Install *assuming you've used autoinstaller*

Quote:

Originally Posted by Clubberlang (Post 810947)

I am unable to see NitDroid at all in Extras-devel. :( Anyone know why?

Me either had to do it via xterm.

Quote:

Originally Posted by jamie721 (Post 810932)

Partitioned on my mac as two 2gb fat32 (4gb) and ran nitdroid and it went smooth had problems like you before i did that.

sophocha

2010-09-08 19:43

Re: [updated] NITdroid 0.0.8 HOWTO Install *assuming you've used autoinstaller*

Quote:

Originally Posted by Deaconclgi (Post 810909)

Thank you sir!That`s all you have to do if you have the installer.One problem though, where is the EXTRA folder in the new version to install Adobe Flash 10.1.It doesn`t exist now!Where can I find the file?

Thanks

All times are GMT. The time now is 23:18.

Page 2 of 4

< Prev

Next >

Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8