Originally Posted by naninenu (Post 989314)

4. Wifi connects without a problem

Originally Posted by naninenu (Post 989589)

Look at this
http://forums.internettablettalk.com...t=65776&page=2
This command might do the trick for u

apt-get install --reinstall kernel kernel-flasher

Originally Posted by mmlado (Post 989783)

I think there is no problem with noobs, problem is with those noobs who have little patience and that want advanced stuff without any effort from their part.
I have a hunch that most of them come from a M$/Apple world where they get everything served when it's ready.
Fortunately the open source uses different model, and we see the development phase with all the good and bad things it brings with it.

Originally Posted by mikecomputing (Post 989845)

I did expect a problem on my OLD N900 with wifi, it gives random MAC adress every reboot that make it impossible to connect to my router cause I have MAC filtering activated.

Please fill in this bugreport if anyone got problemt with MAC adress if it's different in Meego from Maemo.

ifconfig wlan0 should report the same both in Maemo and Meego.

http://bugs.meego.com/show_bug.cgi?id=16119

Originally Posted by azkay (Post 989856)

"M$"? Please.



http://wiki.maemo.org/N900_USB_netwo...he_MAC_address
Try that, its for Maemo but it might work just the same.

Originally Posted by mikecomputing (Post 989872)

hmm thats for USB networking my bugreport is for the Wifi.

Originally Posted by azkay (Post 989881)

Well, that command doesnt specify USB only, maybe it sets the MAC address of wifi also.

Originally Posted by cooldubai (Post 1075191)

How do i uninstall MEEGO v1.2 Developer's Edition?
well i tried formatting my SD card (8GB) on the PC it only showed up 3.5GB of space.

Any help?

Originally Posted by timoph (Post 1075197)

Remove the partitioning from the card (using fdisk, gparted, etc.) and create a new partition that uses the entire space.

Originally Posted by naninenu (Post 989295)

See the process below
To use Windows (XP, Vista, 7) to copy the image to your Micro SDHC card, you will need to make sure:

You can unpackage the image file. To do this you will need a compression utility, like 7-Zip http://7zip.com
You have an image writer utility, like Win32DiskImager.exe
https://launchpad.net/win32-image-writer/+download
Using your preferred compression utility, extract the contents of the downloaded image. Once uncompressed, you will have a named directory containing the MeeGo Handset Images.

Once you have extracted and located the image you wish to install, use your preferred image writer to write the image to your Micro SD card. Here’s an example of the process you may follow to use the W32DiskImager:

Run W32DiskImager.exe.
Select the desired MeeGo Handset Image.
Select the drive letter for your Micro SDHC card.
Click the “Write” button to start writing the MeeGo Handset Image to the Micro SDHC card.

You should down load the image available in
http://repository.maemo.org/meego/n9...de-acceptance/
The image with extension raw.bz2

You also need to download and install uboot for PR 1.3 from extras-devel

Hope this helps

Originally Posted by shishtox (Post 1075317)

right now I just finished installing the first package, extra audio support for N900 handset , and attempting to run all possible software updates, it's taking a while but again it's from and SD and there is around 95 packages to update, will come back with the results soon i hope :)

Originally Posted by timoph (Post 1075197)

Remove the partitioning from the card (using fdisk, gparted, etc.) and create a new partition that uses the entire space.

Originally Posted by don_falcone (Post 1075229)

...you did install Meego, but you have no clue how to partition? Better keep your hands off next time. anyway, here's a guide.