Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.2.3]
 

I just noticed that the optimization process drains the battery especially when the iterations are increased:
I was optimizing my n9 as following:1200Mhz @ 1275000v with 10000 iterations my battery was about 50% then after the test was done it dropped to 19% ....

not that i'm wining about it but is this normal ?

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.2.3]
 

no its not mine after several test of many combination minus 2% the batery it was 95 and then 93

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.2.3]
 

i'll retry after a full recharge maybe my batt wa weak ....

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.2.3]
 

FYI. Mine is dropping about 2% as well by testing 15000 iterations for 1200MHz @ 1200000v

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.2.3]
 

u sure 1200Mhz @ 1200000v ???!!!

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.2.3]
 

now its good when i've done it the batt %tage only dropped 2% now

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.2.3]
 

Yes. This is my setting and profile.


The OC kernel modules & UI are really awesome!!

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.2.3]
 

Mine is now 1200&1250000.

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.2.3]
 

My 1st post, :)

mine @1,150ghz with stock voltage

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.2.3]
 

selamat datang

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.2.4]
 

formula 1 settings

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.2.4]
 

Wow, and works fine? What's battery temp at those settings.? In hard usage.

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.2.4]
 

mine was 1350 MHz & 1.375 V, there were few unxpected reboot. So I changed now to 1250 Mhz & 1.275V. Testing!

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.2.4]
 

second day hard use temp 40 celciu medium use 37 relax time 26 celciu time of battery life 16 hours very stable

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.2.4]
 

the most stable for me is 1390 mhz with 1400000μv sr on

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.2.4]
 

Try 1400mhz with lower voltages than 1.4v and SR off .


It seems SR needs voltage increment to be stable , now I don't know what worths more , lower voltage and sr off or higher voltage and sr on ?

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.2.4]
 

i unistall the 1.2.3 ui and install 1.2.4 ui the aplication board say 1.2.4 but opptimizer board said version 1.2.3 is that corect creamy?

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.2.4]
 

Yes, you'll be happy to know I wasted a few hours figuring out how to inject the correct version number from the changelog into my c++ and qml code so this never happens again. Sorry for the inconvenience :rolleyes:
You guys should pick better stuff to complain about...

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.2.4]
 

Im at 1.375Ghz and using 1.3375 for my voltage.

Stable, no reboots or problems :D

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.2.4]
 

Must that old ui be uninstalled before install new version.? I just rewrited it directly..

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.2.4]
 

just overwrite

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.2.5]
 

New version 1.2.5 of the UI, only difference is that it checks this forum topic for new versions of the UI and kernel modules.
You can trigger the update check from the menu, or not. It automatically does the check when you start the ui if you are on wifi network or your data connection reports 'home network' (not roaming). I think this is cool, now you never have to come back here to see if there's a new version... :)

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.2.5]
 

oh, i guess i broke one thing on the about page, oops. now it doesn't show the current version again. let me fix that... download again in 5 min if you did already.
Man, this stuff is a pain sometimes. Found another bug and fixed it too. Just testing now... Okay it probably works now :p
Hmmm I'd rename it to 1.2.5a but it will break my update function.
Well, the .deb is a bit bigger now. 68,564 bytes.

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.2.5]
 

can i download now?

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.2.5]
 

Yeah all done.

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.2.5]
 

the update is 1.2.5? Or 1.2.5a? Because the page said 1.2.5

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.2.5]
 

1.2.5 is correct

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.2.5]
 

gd news i fried up my cpu :D
@ Arie lets make a club :P

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.2.5]
 

I support this decision.

I replaced my N9 with one I found on a trip and now I have a Unicorn N9 coming too.

This is called ocd, 2 Black N9's, a White N9 and an N950. lol

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.2.5]
 

Well mine has a warranty in Qatar so i will sent it to have the board replaced and will use my gf's N9 she wants a Droid and can't make her change her ming she misses all of the applications ....

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.2.5]
 

What applications? Nothing exciting out there that I don't have on my N9. :cool:

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.2.5]
 

sure you don't miss whatsapp since you have wazapp
she wants viber, tango...these famous apps

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.2.5]
 

welcome back mr.arie , :)

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.2.5]
 

You're back! :eek:

I don't even use wazapp, lol. I'm in the us, anyone I want to talk to is either on Gtalk or some other protocol that is built into the system.

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.2.5]
 

this is miracle, amaziN9, i love this community, :)

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.2.5]
 

"we are going out of subject"
final reply: i use lots of whatsapp on my primary phone the E7 best phone i ever owned my N9 & htc sensation are secondary but i enjoy the most the N9 now will have a lot of work to re-do after it went dead...

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.2.5]
 

How are you certain you burned your chip? Have you opened up the N9 to find out?

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.2.5]
 

well this happened after i tried to go 1350mz with 1.4v it suddently died, i tried everything that i can imagine to turn it back on but no use. I want it to open it but it has a warranty seal on the screw so i prefer not to break it since i still have about 18 months of warranty on it (they offer 2 years warranty for the N9 in qatar)

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.2.5]
 

Hold the power button for 30 seconds.

Also have you tried flashing it?

Re: overclocking kernel modules + UI for PR1.2 [ko v1.5.3] [ui v1.2.5]
 

holding the power button does noting, as for reflashing it also when connected to the pc nothing happens
if its not my cpu i'm pretty sure that there is something that burnt inside the board
no signs of any life inside it...

Edit: thats why i've been silent for a couple of days it actually stopped working on monday and since then i tried everything i know or i can find on google to power it back on...