maemo.org - Talk
Page 22 of 23 « First 122021 22 23
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   Applications (https://talk.maemo.org/forumdisplay.php?f=41)
-   -   [Announce] VICaR: Value International Call Router (Calling Card Helper) (https://talk.maemo.org/showthread.php?t=52374)

avidscavenger 2011-03-18 02:51
Re: [Announce] VICaR: Value International Call Router (Calling Card Helper)
 
1 Attachment(s)
OK try this for size:

Using the attached code modelled on this: http://ubuntuforums.org/showpost.php...08&postcount=4 I fake the keystrokes to do generate the DTMF codes.

FYI The mappings are: 24=q/1 ... 33=p/0 and 40=d/# You don't have to worry about the modifiers as the dialler converts codes to valid DTMF values. For instance:

Quote:
./injectkey 33 26 ... 40
dials "03...#" very much faster than the dbus calls.

I haven't figured out how to close the keypad on the screen yet but that's all that's missing to make this a quite usable, if ugly, hack.

scifi.guy 2011-03-18 04:44
Re: [Announce] VICaR: Value International Call Router (Calling Card Helper)
 
Quote:
Originally Posted by avidscavenger (Post 970024)
OK try this for size:

Using the attached code modelled on this: http://ubuntuforums.org/showpost.php...08&postcount=4 I fake the keystrokes to do generate the DTMF codes.

FYI The mappings are: 24=q/1 ... 33=p/0 and 40=d/# You don't have to worry about the modifiers as the dialler converts codes to valid DTMF values. For instance:



dials "03...#" very much faster than the dbus calls.

I haven't figured out how to close the keypad on the screen yet but that's all that's missing to make this a quite usable, if ugly, hack.
It does look ugly but let me try to merge this with qt code.

farookhmansoor 2011-03-28 10:39
Re: [Announce] VICaR: Value International Call Router (Calling Card Helper) released to extras-devel
 
Quote:
Originally Posted by scifi.guy (Post 704747)
how do you generally dial/enter the international number after calling your calling card number? Some cards ask for "<country code> phone number", some ask for "011<country code>phone number".

So depending on your calling card system's requirement, you need to choose the number format as the "format required for dtmf tone".

The setting "delay before sending dtmf" can be left as 1 for most cases. Increasing this number is required only if the calling card system makes you wait for a long time before entering the phone number.

how can i use calling card in my n900 nokia. I cannot install any dialing software

scifi.guy 2011-03-28 17:28
Re: [Announce] VICaR: Value International Call Router (Calling Card Helper) released to extras-devel
 
Quote:
Originally Posted by farookhmansoor (Post 977020)
how can i use calling card in my n900 nokia. I cannot install any dialing software
Hi Farookh - I didn't understand. Do you have trouble installing Vicar from extras-devel?

maemomiguel 2011-06-09 09:22
Re: [Announce] VICaR: Value International Call Router (Calling Card Helper)
 
Hi, I'm new here and with Maemo on my N900. I like the application Vicar very much and it's exactly what I'm looking for, but I can't get it running well.
Perhaps this is important: The system is up to date, but I'm using kernel 2.6.28.10-power47

I installed Vicar with the programm manager. The phone numbers are stored in the format as e.g. +49 (170) 27684
I'm using smslisto.com as the card providor.
My setup for "Default profile":
------------------------
Calling card number: <telephone number from providor>
Format required for DTMF tone: 00<Country code><Area code><Phone number>
DTMF tone prefix: p
DTMF tone suffix: #
------------------------
I don't defined another profile, so I can read in Vicar's main window:
No profile found, then call via 911323001

If in adressbook I click "Call via Vicar" this message comes up:
Vicar: +49 (170) 27684 is not a valid number

and nothing happens.

What is my mistake, how can I setup Vicar to dial numbers from my adressbook by phone cards?

In advance thank you very much for any help!

scifi.guy 2011-06-09 20:27
Re: [Announce] VICaR: Value International Call Router (Calling Card Helper)
 
@maemomiguel

Can you please run this command, reproduce the error and send me the output?

Code:
dbus-monitor --session > /home/user/MyDocs/dbus_log.txt

helex 2011-07-28 21:27
Re: [Announce] VICaR: Value International Call Router (Calling Card Helper)
 
Quote:
Originally Posted by scifi.guy (Post 970055)

Quote:
Originally Posted by avidscavenger (Post 970024)
I haven't figured out how to close the keypad on the screen yet but that's all that's missing to make this a quite usable, if ugly, hack.
It does look ugly but let me try to merge this with qt code.
Hi scifi.guy!

Were you able to integrate the code from avidscavenger into your qt application?
The X11 extensions are to much for my weak skills. :(

I'm currently searching a good solution to send KeyCodes to other applications without using external shell scripts.

scifi.guy 2011-07-28 21:36
Re: [Announce] VICaR: Value International Call Router (Calling Card Helper)
 
Quote:
Originally Posted by helex (Post 1060271)
Hi scifi.guy!

Were you able to integrate the code from avidscavenger into your qt application?
The X11 extensions are to much for my weak skills. :(

I'm currently searching a good solution to send KeyCodes to other applications without using external shell scripts.
Sorry, I didn't have a chance to convert it to Qt.

pavibhai 2011-11-23 22:20
Re: [Announce] VICaR: Value International Call Router (Calling Card Helper)
 
Thanks for this excellent app, it made calling so much more easy.
Any chance you planning on getting this ported to N9 as well?

scifi.guy 2011-11-24 15:12
Re: [Announce] VICaR: Value International Call Router (Calling Card Helper)
 
@pavibhai - Thank you. Yes, I am already working on porting it to harmattan. I have few issues to be resolved before I can publish it.


All times are GMT. The time now is 15:35.
Page 22 of 23 « First 122021 22 23
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8