maemo.org - Talk - Sailfish OS on Sony Xperia X (community build)

maemo.org - Talk (https://talk.maemo.org/index.php)

- SailfishOS (https://talk.maemo.org/forumdisplay.php?f=52)

- - Sailfish OS on Sony Xperia X (community build) (https://talk.maemo.org/showthread.php?t=99875)

Re: Sailfish OS on Sony Xperia X (community build)

Quote:

Originally Posted by karlos devel (Post 1536131)

Yeap I will. I also see people here like protecting xperia DRM. please I not one of these. :D

As far as I understand the process of the oem move, it should be ok for you, if you do only the second part within the recovery shell and try reboot after that.

Re: Sailfish OS on Sony Xperia X (community build)

Hi,

Quote:

Originally Posted by deprecated (Post 1536129)

Depending on your distro, you need to install 32-bit libraries. As example, for Ubuntu:

Code:

sudo dpkg --add-architecture i386

For Fedora:

Code:

sudo dnf install glibc.i686

I use Linux Mint what i have done and found on the net is sudo apt-get install ia32-libs, and that worked out.

Re: Sailfish OS on Sony Xperia X (community build)

Quote:

Originally Posted by meemorph (Post 1536132)

As far as I understand the process of the oem move, it should be ok for you, if you do only the second part within the recovery shell and try reboot after that.

Thank u very much. I already did that but same not boot.

Re: Sailfish OS on Sony Xperia X (community build)

Quote:

Originally Posted by meemorph (Post 1536127)

@oenone: others wrote it before, do it from recovery shell. You need a recovery image "hybris-recovery.img". It's build in the syspart environment.

First read and understand this

Then start the phone in fastboot mode (vol-up + plugin usb). Your led sould light blue. To boot the recovery do this:

Code:

sudo fastboot boot hybris-recovery.img

Your phone boots to recovery (very small text displayed). You do

Code:

telnet 10.42.66.66

Select topic 3 (shell)
Continue in doing the change with my parameters. Maybe you do not want to enlarge the rootfs by 4GB (I have my home on sd card and do not neet the phones internal home partition). 2GB are enougth, change the 4096M to 2048M. Do all the steps !at your own risk! before you reboot.

Thank you for these instructions. Also thank you to the others that also provided advice on my predicament.

I flashed via fastboot a boot image supposedly claiming to be 34.3.A.0.238 and then restored the TWRP recovery partition, and Sailfish reinstalled just fine.

However, I have encountered a problem. I can place the device into fastboot mode (from power: off Volume-Up button depressed + insert USB cable. Light turns a delightful shade of blue and device is listed in fastboot) but I am unable to boot it into recovery.

Neither

Code:

sudo fastboot boot $ANDROID_ROOT/hybris/mw/droid-hal-img-boot-f5121/installroot/boot/hybris-recovery.img

nor

Code:

sudo fastboot boot hybris-recovery.img

did anything except for print me a complaint of "cannot load '[hybris-recovery.img]": No such file or directory.

I tried to use the terminal in the TWRP recovery, but lvm seems to be missing from that.

Is there anything else I can try?

Also, is there a way to confirm that one is on 34.3 (bootloader version, I suppose} without an installation of Android?

Re: Sailfish OS on Sony Xperia X (community build)

https://sailfishos.org/wiki/Sailfish_X_Build_and_Flash

If you build the sailfishX you find it under syspart, not that ANDRIOD_ROOT. But I think, you never made your own build.

Re: Sailfish OS on Sony Xperia X (community build)

Quote:

Originally Posted by oenone (Post 1536142)

Code:

sudo fastboot boot $ANDROID_ROOT/hybris/mw/droid-hal-img-boot-f5121/installroot/boot/hybris-recovery.img

nor

Code:

sudo fastboot boot hybris-recovery.img

The problem here is that hybris-recovery.img isn't included with the image in the first post. I went through that myself, and decided to just build the HADK/Platform SDK to compile the prerequisites and images.

I've uploaded the hybris-recovery.img here:
http://truthcrime.com/hybris-recovery.img

Let me know if that works for you (or if this is a violation of software distribution rights).

Edit: fixed link, this recovery img works, just tested it.

Re: Sailfish OS on Sony Xperia X (community build)

"or if this is a violation of software distribution rights"

thats the question.

Re: Sailfish OS on Sony Xperia X (community build)

Quote:

Originally Posted by deprecated (Post 1536150)

Thank you most kindly. Yes, I did not compile it myself but I chose instead to trust complete strangers from the internet.

But now where (and how) do I place it such that

Code:

sudo fastboot boot hybris-recovery.img

works?

I am really sorry for so many questions!

Maybe I will just wait until Wednesday? Oh, right, the only Windows machine I have is a server and Emma in Sony's infinite wisdom does not want to run on Server 2008 R2. It installs just fine, but doesn't want to run.

Re: Sailfish OS on Sony Xperia X (community build)

Quote:

Originally Posted by oenone (Post 1536170)

Thank you most kindly. Yes, I did not compile it myself but I chose instead to trust complete strangers from the internet.

But now where (and how) do I place it such that

Code:

sudo fastboot boot hybris-recovery.img

Doesn't matter, as long as it's a directory you can read. How have you installed fastboot on your computer?

Re: Sailfish OS on Sony Xperia X (community build)

Quote:

Originally Posted by deprecated (Post 1536171)

Doesn't matter, as long as it's a directory you can read. How have you installed fastboot on your computer?

It is just the fastboot/adb that one installs on Xubuntu. I added the nilarimogard/webupd8 repository and then apt-got (past tense, haha) android-tools-adb and android-tools-fastboot.

Somehow I get the feeling that I need to have hybris-recovery.img in a directory on my computer and not on the Xperia device. . .

. . .Let me check. . .

. . .Yes, and I found that to be my problem, thank you. Now in age-discriminating font it is telling me to telnet into 10.42.66.66.

Now, the question is what are all these warnings and can I safely ignore them?

Code:

-----------------------------

     Jolla Recovery v2.0

-----------------------------

Welcome to the recovery tool!

The available options are:

1) Reset device to factory state

2) Reboot device

3) Shell

4) Perform file system check

5) Run sshd

6) Exit

Type the number of the desired action and press [Enter]: 

3



If you continue, this may void your warranty. Are you really SURE? [y/N] y



  /dev/mmcblk0rpmb: read failed after 0 of 4096 at 0: Input/output error

  /dev/mmcblk0rpmb: read failed after 0 of 4096 at 4128768: Input/output error

  /dev/mmcblk0rpmb: read failed after 0 of 4096 at 4186112: Input/output error

  /dev/mmcblk0rpmb: read failed after 0 of 4096 at 4096: Input/output error

  2 logical volume(s) in volume group "sailfish" now active

readlink('/proc/self/fd/3') failed: No such file or directory [fd=3]

warning: unable to get realpath for the library "libGLESv2.so". Will use given name.

readlink('/proc/self/fd/3') failed: No such file or directory [fd=3]

warning: unable to get realpath for the library "libcutils.so". Will use given name.

readlink('/proc/self/fd/3') failed: No such file or directory [fd=3]

warning: unable to get realpath for the library "libutils.so". Will use given name.

readlink('/proc/self/fd/3') failed: No such file or directory [fd=3]

warning: unable to get realpath for the library "liblog.so". Will use given name.

readlink('/proc/self/fd/3') failed: No such file or directory [fd=3]

warning: unable to get realpath for the library "libEGL.so". Will use given name.

readlink('/proc/self/fd/3') failed: No such file or directory [fd=3]

warning: unable to get realpath for the library "libdsyscalls.so". Will use given name.

readlink('/proc/self/fd/3') failed: No such file or directory [fd=3]

warning: unable to get realpath for the library "libc++.so". Will use given name.

readlink('/proc/self/fd/3') failed: No such file or directory [fd=3]

warning: unable to get realpath for the library "libc.so". Will use given name.

readlink('/proc/self/fd/3') failed: No such file or directory [fd=3]

warning: unable to get realpath for the library "libm.so". Will use given name.

readlink('/proc/self/fd/3') failed: No such file or directory [fd=3]

warning: unable to get realpath for the library "libbacktrace.so". Will use given name.

readlink('/proc/self/fd/3') failed: No such file or directory [fd=3]

warning: unable to get realpath for the library "libGLES_trace.so". Will use given name.

readlink('/proc/self/fd/3') failed: No such file or directory [fd=3]

warning: unable to get realpath for the library "libbase.so". Will use given name.

readlink('/proc/self/fd/3') failed: No such file or directory [fd=3]

warning: unable to get realpath for the library "libunwind.so". Will use given name.

readlink('/proc/self/fd/3') failed: No such file or directory [fd=3]

warning: unable to get realpath for the library "libprotobuf-cpp-lite.so". Will use given name.

readlink('/proc/self/fd/3') failed: No such file or directory [fd=3]

warning: unable to get realpath for the library "libnetd_client.so". Will use given name.



Type your devicelock code and press [ENTER] key:

(please note that the typed numbers won't be shown for security reasons)

readlink('/proc/self/fd/3') failed: No such file or directory [fd=3]

warning: unable to get realpath for the library "libGLESv2.so". Will use given name.

readlink('/proc/self/fd/3') failed: No such file or directory [fd=3]

warning: unable to get realpath for the library "libcutils.so". Will use given name.

readlink('/proc/self/fd/3') failed: No such file or directory [fd=3]

warning: unable to get realpath for the library "libutils.so". Will use given name.

readlink('/proc/self/fd/3') failed: No such file or directory [fd=3]

warning: unable to get realpath for the library "liblog.so". Will use given name.

readlink('/proc/self/fd/3') failed: No such file or directory [fd=3]

warning: unable to get realpath for the library "libEGL.so". Will use given name.

readlink('/proc/self/fd/3') failed: No such file or directory [fd=3]

warning: unable to get realpath for the library "libdsyscalls.so". Will use given name.

readlink('/proc/self/fd/3') failed: No such file or directory [fd=3]

warning: unable to get realpath for the library "libc++.so". Will use given name.

readlink('/proc/self/fd/3') failed: No such file or directory [fd=3]

warning: unable to get realpath for the library "libc.so". Will use given name.

readlink('/proc/self/fd/3') failed: No such file or directory [fd=3]

warning: unable to get realpath for the library "libm.so". Will use given name.

readlink('/proc/self/fd/3') failed: No such file or directory [fd=3]

warning: unable to get realpath for the library "libbacktrace.so". Will use given name.

readlink('/proc/self/fd/3') failed: No such file or directory [fd=3]

warning: unable to get realpath for the library "libGLES_trace.so". Will use given name.

readlink('/proc/self/fd/3') failed: No such file or directory [fd=3]

warning: unable to get realpath for the library "libbase.so". Will use given name.

readlink('/proc/self/fd/3') failed: No such file or directory [fd=3]

warning: unable to get realpath for the library "libunwind.so". Will use given name.

readlink('/proc/self/fd/3') failed: No such file or directory [fd=3]

warning: unable to get realpath for the library "libprotobuf-cpp-lite.so". Will use given name.

readlink('/proc/self/fd/3') failed: No such file or directory [fd=3]

warning: unable to get realpath for the library "libnetd_client.so". Will use given name.

[OK] Code accepted.

lvm seems to work but there were still some complaints:

Code:

/ # lvm

lvm> lvscan

  /dev/mmcblk0rpmb: read failed after 0 of 4096 at 0: Input/output error

  ACTIVE            '/dev/sailfish/root' [2.44 GiB] inherit

  ACTIVE            '/dev/sailfish/home' [47.38 GiB] inherit

lvm> exit

  Exiting.

/ # resize2fs /dev/sailfish/home 11G

resize2fs 1.43.1 (08-Jun-2016)

Resizing the filesystem on /dev/sailfish/home to 2883584 (4k) blocks.

The filesystem on /dev/sailfish/home is now 2883584 (4k) blocks long.



/ # lvm

lvm> lvresize -L -4096M /dev/sailfish/home

  /dev/mmcblk0rpmb: read failed after 0 of 4096 at 0: Input/output error

  WARNING: Reducing active logical volume to 43.38 GiB

  THIS MAY DESTROY YOUR DATA (filesystem etc.)

Do you really want to reduce home? [y/n]: y

  Size of logical volume sailfish/home changed from 47.38 GiB (12128 extents) to 43.38 GiB (11104 extents).

  Logical volume home successfully resized

lvm> lvresize -l +100%FREE /dev/sailfish/root

  Size of logical volume sailfish/root changed from 2.44 GiB (625 extents) to 6.44 GiB (1649 extents).

  Logical volume root successfully resized

lvm> lvscan

  ACTIVE            '/dev/sailfish/root' [6.44 GiB] inherit

  ACTIVE            '/dev/sailfish/home' [43.38 GiB] inherit

lvm> exit

  Exiting.

/ # resize2fs /dev/sailfish/home

resize2fs 1.43.1 (08-Jun-2016)

Resizing the filesystem on /dev/sailfish/home to 11370496 (4k) blocks.

The filesystem on /dev/sailfish/home is now 11370496 (4k) blocks long.



/ # resize2fs /dev/sailfish/root

resize2fs 1.43.1 (08-Jun-2016)

Filesystem at /dev/sailfish/root is mounted on /rootfs; on-line resizing required

old_desc_blocks = 1, new_desc_blocks = 1

The filesystem on /dev/sailfish/root is now 1688576 (4k) blocks long.

Rebooted to Sailfish, everything seems to work. Thanks, everybody!