maemo.org - Talk
Page 23 of 62 « First 132122 23 242533 Last »
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   OS2008 / Maemo 4 / Chinook - Diablo (https://talk.maemo.org/forumdisplay.php?f=29)
-   -   ANNOUNCE: Diablo-Turbo first beta available (https://talk.maemo.org/showthread.php?t=69740)

fpp 2011-03-13 17:07
Re: ANNOUNCE: Diablo-Turbo first beta available
 
Just FYI : this weekend I applied DT (as described on first page, plus the latest zImage from a couple pages back) to both my N800 and N810.

Both installation went real smoothly. I haven't stress-tested them heavily since, but at least they rebooted fine and seem no worse for wear :-)

Both devices had (slightly different customizations, like Advanced Power, Launcher, Telescope etc. All seem to work as before.

Great job, and thanks for bringing some action to our old tablets ! :-)

heavyt 2011-03-14 03:26
Re: ANNOUNCE: Diablo-Turbo first beta available
 
O.K. still not able to switch off the unit by any means. Holding down the power button or selecting 'switch off' only reboots it. If I command 'shutdown now' via the terminal, will only put the unit in a state where the screen goes black until I slide open the keys where I get a white screen, removing the battery is the only way to reset it.

I have done a fresh install without using my old back-up and only a few (total of sixteen) apps installed. The DT install was done by the book, I even made sure that the sysvinit=2.85-22.osso15 was not replaced by the DT sysvinit. Yes I also fiasco-flasher -f -k the DT kernel with zimage.

auouymous 2011-03-14 04:29
Re: ANNOUNCE: Diablo-Turbo first beta available
 
Quote:
Originally Posted by heavyt (Post 967238)
Holding down the power button or selecting 'switch off' only reboots it. If I command 'shutdown now' via the terminal, will only put the unit in a state where the screen goes black until I slide open the keys where I get a white screen, removing the battery is the only way to reset it.
What happens if you turn on R&D mode and disable the lifeguard-reset?

EDIT:
Quote:
I even made sure that the sysvinit=2.85-22.osso15 was not replaced by the DT sysvinit.
Isn't the DT sysvinit needed to properly shutdown?

heavyt 2011-03-14 04:36
Re: ANNOUNCE: Diablo-Turbo first beta available
 
Quote:
Originally Posted by auouymous (Post 967253)
What happens if you turn on R&D mode and disable the lifeguard-reset?
sorry to be slow but how is that done,

heavyt 2011-03-14 04:47
Re: ANNOUNCE: Diablo-Turbo first beta available
 
Quote:
Originally Posted by auouymous (Post 967253)
What happens if you turn on R&D mode and disable the lifeguard-reset?

EDIT: Isn't the DT sysvinit needed to properly shutdown?
well was told that the new patch made the DT sysvinit not need because it took care of the shutdown problem

auouymous 2011-03-14 04:48
Re: ANNOUNCE: Diablo-Turbo first beta available
 
Quote:
Originally Posted by heavyt (Post 967256)
sorry to be slow but how is that done,
flasher-3.0-static --enable-rd-mode --set-rd-flags=no-lifeguard-reset -R

heavyt 2011-03-14 04:56
Re: ANNOUNCE: Diablo-Turbo first beta available
 
N810-WiMAX-43-7:~# flasher-3.0-static -sh: flasher-3.0-static: not found

auouymous 2011-03-14 06:19
Re: ANNOUNCE: Diablo-Turbo first beta available
 
Quote:
Originally Posted by heavyt (Post 967266)
N810-WiMAX-43-7:~# flasher-3.0-static -sh: flasher-3.0-static: not found
Replace "flasher-3.0-static" with the flasher you use to reflash the tablet.

maacruz 2011-03-14 08:36
Re: ANNOUNCE: Diablo-Turbo first beta available
 
Quote:
Originally Posted by heavyt (Post 967260)
well was told that the new patch made the DT sysvinit not need because it took care of the shutdown problem
I have tested shutdown just now again, after a 4 days uptime, and you are right, the shutdown issue is not gone :-(
sysvinit is still needed
Somehow it worked with diablo's sysvinit when I tested the patch.

heavyt 2011-03-14 13:21
Re: ANNOUNCE: Diablo-Turbo first beta available
 
Quote:
Originally Posted by maacruz (Post 967356)
I have tested shutdown just now again, after a 4 days uptime, and you are right, the shutdown issue is not gone :-(
sysvinit is still needed
Somehow it worked with diablo's sysvinit when I tested the patch.
Thanks, I thought I was doing something wrong. The DT sysvinit fixed the shutdown problem. :D


All times are GMT. The time now is 16:44.
Page 23 of 62 « First 132122 23 242533 Last »
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8