maemo.org - Talk
Page 23 of 24 « First 132122 23 24
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   Applications (https://talk.maemo.org/forumdisplay.php?f=41)
-   -   [ANNOUNCE] Wlan Driver Selector Applet - Switch easily between stock and bleeding edge drivers and shut down WLAN complitely [0.2.2 in extras] (https://talk.maemo.org/showthread.php?t=73682)

J4ZZ 2012-03-01 23:40
Re: [ANNOUNCE] Wlan Driver Selector Applet - Switch easily between stock and bleeding edge drivers and shut down WLAN complitely [0.2.2 in extras]
 
I'm facing the same "SIOCGIFFLAGS: no such device"-Error when loading bleeding edge drivers since installing u-boot lately.
so regarding to...

Quote:
Originally Posted by laasonen (Post 1150580)
What works and what doesn't?
  • Loading stock-drivers
  • Loading bleedingedge-drivers
  • Disabling wlan
-Loading stock works
-Disabling wlan works


Loading Bleedings egde using applet or load.sh gives me
Code:
Error while loading kernel modules
ifconfig: SIOCGIFFLAGS: No such device
Error while starting wlan0 interface
Drivers were not loaded
So, any ideas why this is happening and how to fix this?

Greetz,

J4ZZ

Edit: I tried advanced interface switcher, but under preferences - WLAN startup mode I can only select "stock"

don_falcone 2012-03-03 00:11
Re: [ANNOUNCE] Wlan Driver Selector Applet - Switch easily between stock and bleeding edge drivers and shut down WLAN complitely [0.2.2 in extras]
 
Yes i'm sure i'm referreing to interface switcher. Somebody has switched the thread title!

laasonen 2012-03-03 00:23
Re: [ANNOUNCE] Wlan Driver Selector Applet - Switch easily between stock and bleeding edge drivers and shut down WLAN complitely [0.2.2 in extras]
 
Quote:
Originally Posted by J4ZZ (Post 1172807)
I'm facing the same "SIOCGIFFLAGS: no such device"-Error when loading bleeding edge drivers since installing u-boot lately.
so regarding to...


-Loading stock works
-Disabling wlan works


Loading Bleedings egde using applet or load.sh gives me
Code:
Error while loading kernel modules
ifconfig: SIOCGIFFLAGS: No such device
Error while starting wlan0 interface
Drivers were not loaded
So, any ideas why this is happening and how to fix this?

Greetz,

J4ZZ

Edit: I tried advanced interface switcher, but under preferences - WLAN startup mode I can only select "stock"
Which kernel are you using?

Quote:
Originally Posted by don_falcone (Post 1173373)
Yes i'm sure i'm referreing to interface switcher. Somebody has switched the thread title!
The thread title has been the same since last summer..

don_falcone 2012-03-03 10:33
Re: [ANNOUNCE] Wlan Driver Selector Applet - Switch easily between stock and bleeding edge drivers and shut down WLAN complitely [0.2.2 in extras]
 
It was a joke, man.

J4ZZ 2012-03-04 13:45
Re: [ANNOUNCE] Wlan Driver Selector Applet - Switch easily between stock and bleeding edge drivers and shut down WLAN complitely [0.2.2 in extras]
 
I'm using power49 kernel. Thanks for helping mate. ;)

Edit: Nevermind, found the error.
In xterm
Code:
uname -r
revealed the answer.
Accidentily omap instead of power49 was loaded ;) *stupid me* :D

Greetz,

J4ZZ

taixzo 2012-04-02 20:54
Re: [ANNOUNCE] Wlan Driver Selector Applet - Switch easily between stock and bleeding edge drivers and shut down WLAN complitely [0.2.2 in extras]
 
I am also getting the "SIOCGIFFLAGS: no such device" error. uname -r shows:
Code:
~ $ uname -r
2.6.28.10-power50
~ $
So why am I getting the error?

StefanL 2012-04-04 16:25
Re: [ANNOUNCE] Wlan Driver Selector Applet - Switch easily between stock and bleeding edge drivers and shut down WLAN complitely [0.2.2 in extras]
 
Quote:
Originally Posted by taixzo (Post 1187354)
I am also getting the "SIOCGIFFLAGS: no such device" error. uname -r shows:
Code:
~ $ uname -r
2.6.28.10-power50
~ $
So why am I getting the error?
Looks like ifconfig in the load / unload script for the injection drivers throws up that error message looking for the hardware address of wlan0. With injection drivers loaded it doesn't seem to find the wlan0 device anymore. I am getting a "Unknown symbol in module" error when trying to load wl1251_spi.ko, which might explain why ifconfig doesn't see the hardware (ie. the drivers are not loaded).

Edit: Rebooted a few times and re-downloaded the KP50 version drivers again fixed the problem for a bit, but I have a feeling that they are not really stable; ie. after awhile, the loading / unloading runs into problems again. Might be a solution to just load them and run with them, ie. avoid repeated loading / unloading cycles.

laasonen 2012-04-05 20:54
Re: [ANNOUNCE] Wlan Driver Selector Applet - Switch easily between stock and bleeding edge drivers and shut down WLAN complitely [0.2.2 in extras]
 
I updated the new drivers to my server, so it should download the new ones, if you delete the old ones with file manager :)

casketizer 2012-04-21 11:10
Re: [ANNOUNCE] Wlan Driver Selector Applet - Switch easily between stock and bleeding edge drivers and shut down WLAN complitely [0.2.2 in extras]
 
Just updated to kp50 finally and i just had to use gconf editor (as explained in first post but I used the GUI gconf editor) to point to new drivers and all works fine here.

akitta 2012-07-07 15:19
Re: [ANNOUNCE] Wlan Driver Selector Applet - Switch easily between stock and bleeding edge drivers and shut down WLAN complitely [0.2.2 in extras]
 
Quote:
Originally Posted by casketizer (Post 1195302)
Just updated to kp50 finally and i just had to use gconf editor (as explained in first post but I used the GUI gconf editor) to point to new drivers and all works fine here.
I've Searched the thread and carn't find the instructions to edit with gconf..
By first post, you mean original poster ?.
I'l look through thread again.
Really want this working again KP50 also.


All times are GMT. The time now is 12:16.
Page 23 of 24 « First 132122 23 24
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8