Re: [Announce] kernel-power v48
 

Same situation :(

Re: [Announce] kernel-power v48
 

I try to unpack kernel-power-settings v12 and v11

Maybe this disturbs the installation?

Sorry for my bad english I'm italian

Re: [Announce] kernel-power v48
 

@vento and radcalz


What about kernel-power-headers and bootimg?
Have you tried to install all packages and then rebooting?

dpkg -i kernel-power_1:2.6.28-10power48_armel.deb
dpkg -i kernel-power-modules_1:2.6.28-10power48_armel.deb
dpkg -i kernel-power-headers_1:2.6.28-10power48_armel.deb
dpkg -i kernel-power-flasher_1:2.6.28-10power48_armel.deb
dpkg -i kernel-power-settings_0.12_armel.deb
dpkg -i kernel-power-bootimg_1:2.6.28-10power48_armel.deb

Greetz,

J4ZZ

Re: [Announce] kernel-power v48
 

Uh no.. I didn't install headers because its not necessary... I'm not gonna compile anything on my device anyways. Also didn't install bootimg as I don't have nitdroid nor multiboot installed.

Re: [Announce] kernel-power v48
 

So there are no fcam drivers in the repository that work with kernel-power v47 from the repository? And there's no precompiled version out there that works?

Re: [Announce] kernel-power v48
 

Hi qole! I don't know but I got mine working on v47 last time. I just forgot whether it was fcam from repositories or it's the fcam drivers from BFS kernel thread.

Re: [Announce] kernel-power v48
 

Simple question, is there someone with only kernel-power, kernel-power-modules, kernel-power-flasher and kernel-power-settigs installed (no kernel-power-headers and kernel-power-bootimg) with a working phone (at least the boot)

sorry for my bad english

Re: [Announce] kernel-power v48
 

Yes, that what I used. I tried to install them all together with dpkg -i *.deb but got a message about flasher being the wrong version, so I installed it alone (without rebooting or anything fancy) and have been running great ever since.

Suggestion: Do whatever you did again and watch the screen carefully for error messages. If you accidentally use the wrong version of flasher you will end up having to reflash.

Re: [Announce] kernel-power v48
 

I'm using kp47, without any problems with fCam drivers, installed long time ago (in kp46-wl1 times). Did not even need to reinstall fCam, everything worked out of the box after installing kp47. No idea what's the difference, that make it fail for so many people, including You.

Re: [Announce] kernel-power v48
 

As I recall, special Fcam drivers were created in the days of overclocking and Titan. There was a thread dedicated to the subject and I found the link to the drivers there. I assumed the fix had been assimilated into the current Fcam drivers by now. I'm not having problems with Fcam.

Re: [Announce] kernel-power v48
 

Do you guys have /etc/default/kernel-power files?

Move it out of the way before you install. You probably have too aggressive of overclocking set.

I just installed the v48 debs (including kernel-power-settings). No problems after a reboot. The phone is working normally.

Re: [Announce] kernel-power v48
 

I install the pakage after a reflash I don't know how can I use an overclocking set.... :(

sorry for my bad english

Re: [Announce] kernel-power v48
 

Sorry.... But I don't know where I'm wrong...

I start with a clean N900, just flashed.
To be the root I use rootsh v1.8 or R&D mode (in booth cases power-kernel don't work with settings).
Move kernel-power, kernel-power-modules and kernel-power-flasher in the phone.
Install in this sequence (in X-Terminal) :
- kernel-power
- kernel-power-modules
- kernel-power-flasher
Remove usb.
Complete shutdown.
Power up.
Nokia Logo.
Phone work correctly!
Download and install kernel-power-settings (in Xterminal).
Complete shutdown.
Power up.
Nokia Logo.
The screen remains black.

I try to install also the headers and bootimg but the result is the same.

Sorry for my bad english, I'm italian.

Re: [Announce] kernel-power v48
 

any news of pushing in this to extras-devel?

Re: [Announce] kernel-power v48
 

@zurrain101,

Sorry if I don't keep this whole thread in my head.. but what exactly do you expect from v48 as opposed to, say, v47?

Cheers.

Re: [Announce] kernel-power v48
 

My phone don't boot with this kernel and power settings.

Re: [Announce] kernel-power v48
 

no because -settings package does not work...

and I contacted man who maintans maemo extras repositories - I'm waiting for responce...

Re: [Announce] kernel-power v48
 

I observed it too.
Before I can install v48. (upgrade from v47), but after I do a clean reflash directly, I install v48 directly, same situation as you happened.
Now I try to install v47 first, then install v48 again, see whether is ok or not.

Re: [Announce] kernel-power v48
 

It's a problem with the power-kernel-settings obviously... Something change from v11 to v12 but I don't know what...

Re: [Announce] kernel-power v48
 

successfully...with upgrade from v47 to v48, setting from 1.1 to 1.2, if directly install v48 and setting 1.2, not ok, black display after boot up

Re: [Announce] kernel-power v48
 

So if you doing upgrade all is ok and if you install directly there is error?

Re: [Announce] kernel-power v48
 

someone can post the changelog of power-kernel-settigs from v11?

Re: [Announce] kernel-power v48
 

I do a EMMC and firmware reflashed, then I install v48 and setting1.2 directly, after reboot, black display showed.

Then I reflashed again, I install v47 and setting 1.1 firstly, after that reboot, and then upgrade to v48 and 1.2, reboot, successful.

Re: [Announce] kernel-power v48
 

It is not obviously kernel power settings. Plenty of people have reported a sucessful upgrade.

God knows what semi broken, half-installed nitroid multiboot mess you have lying all over your rootfs.

If you want the change log go look it up on garage. If you don't know how to do that then stay way from this 'too freakin volatile even for dev repo's' package and just wait for it to trickle down.

Re: [Announce] kernel-power v48
 

I try to install only v48 without upgrade from v47 and wihout settings and the phone boot and work but if I install settings v12 (no upgrading from v11) and the phone no boot up.... So the problem is only in power-kernel-settings v12 (I think)....or maybe something in power-kernel v48 is miss...

ok, ok, sorry....Maybe it's the settings.... However I don't use multiboot

Re: [Announce] kernel-power v48
 

So problem must be in preinst/postinst scripts in package kernel-power, kernel-power-modules or kernel-power-flasher.

There are really no relevant changes in kernel-power-settings package.

Re: [Announce] kernel-power v48
 

Yes probably not in the settings since I for example even if I don't install settings as long as its kernel power v48 it really won't boot. Only difference is
w/ settings = stuck at black screen
w/out settings = reboot loop

Re: [Announce] kernel-power v48
 

When is it available in the repositories to be installed from HAM and FAM?

Thanks for the great work of everyone involved.

Re: [Announce] kernel-power v48
 

i installed the ones from his files through the debs. i installed everything apart from the headers and settings. upgrading from v47 it worked fine

Re: [Announce] kernel-power v48
 

*facepalm*

Really. WIWBD. You could at least read whole last 2 pages of this thread, before posting...

Re: [Announce] kernel-power v48
 

Thank you.

It was not my intention to be heavy.

Re: [Announce] kernel-power v48
 

thank you very much for your hard effor pali, i will wait for it to be in the HAM

btw, ive read some pages, but i havent seen anyone talk about the 720p patch, does it work?

and for what is it? to take video? or just to play it

sorry if i missed the page

cheers

Re: [Announce] kernel-power v48
 

for 720p playback you need:
* kernel driver (for communication with HW)
* TI DSP baseimage
* TI DSP libraries
* gstreamer libraries
* user video playback application

So only first step is done for 720p. and TI work is closed...

Re: [Announce] kernel-power v48
 

720p patch is first kernel-side only attempt to bring recording (more important) and viewing (less important, due to resolution of N900 screen and lack of DVI video output) of 720p videos.

Still, it *don't* work just by installing kernel. Much effort is still needed to bring user-side (aka userland) parts to state of supporting it. So, this way, when we have kernel-side ready, developers may start working on and reliably debugging userland side.

=
It's just first (very big) step, and You still must wait for it.

// Edit

Haha, little too late.

Re: [Announce] kernel-power v48
 

Some news pali?

Re: [Announce] kernel-power v48
 

My proximity sensor stop working after kp48 update. I'm not sure whether it is directly connected with kp48 or something else cause it.

Can someone confirm that proximity is working/broken with kp48?

Re: [Announce] kernel-power v48
 

It's working in mine, no problems

Re: [Announce] kernel-power v48
 

Thanks trlopes1974.

I've managed to make it work. I pull the battery out for several minutes and now is ok.

Re: [Announce] kernel-power v48
 

IIRC to play 720p video, you'll need a new dspbridge and some other files. Both can be obtained from the Internet at large, and the latter -- probably never from TMO due to certain redistribution issues.

On a side note, has anyone got 720p playing under Maemo? Which H.264 profile?

Re: [Announce] kernel-power v48
 

how do i update it from 47??? what should i type in x-term help!