maemo.org - Talk
Page 27 of 33 « First 172526 27 2829 Last »
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   Nokia N9 / N950 (https://talk.maemo.org/forumdisplay.php?f=51)
-   -   overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.7] (https://talk.maemo.org/showthread.php?t=83357)

thedead1440 2012-08-01 12:00
Re: overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.5]
 
CG, all the 3 bugs have been fixed when i tested the package...

Creamy Goodness 2012-08-02 07:08
Re: overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.6]
 
opptimizer-ui (1.2.7) unstable; urgency=low
* Support for VDD2 / GPU settings (only smart reflex for now)
* Fixed bug where incorrectly installed OPPtimizer always thinks there are updates available

Please test. Lots of changes to add that VDD2 SR so could be a bug somewhere.
6 files changed, 150 insertions(+), 42 deletions(-)

http://www.appcheck.net/storage/oppt....2.7_armel.deb

knobtviker 2012-08-02 09:12
Re: overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.6]
 
Testing now... so far running smooth as it should. Previous version fixed a bug for me on the same voltage...
Since I'm a real layman on this turf, can you explain to me what VDD2 / GPU settings are? :)

jleholeho 2012-08-02 09:14
Re: overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.6]
 
same here...1315 MHz, 1325000v, smooth as butter...

Dragoss91 2012-08-02 09:25
Re: overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.6]
 
Quote:
Originally Posted by Creamy Goodness (Post 1246343)
opptimizer-ui (1.2.7) unstable; urgency=low
* Support for VDD2 / GPU settings (only smart reflex for now)
* Fixed bug where incorrectly installed OPPtimizer always thinks there are updates available

Please test. Lots of changes to add that VDD2 SR so could be a bug somewhere.
6 files changed, 150 insertions(+), 42 deletions(-)

http://www.appcheck.net/storage/oppt....2.7_armel.deb
Thank you for listening to my request , now my problems at startup with that painfull SR2 are gone . :D:D:D

kfahoo 2012-08-02 15:21
Re: overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.6]
 
Quote:
Originally Posted by Creamy Goodness (Post 1246343)
opptimizer-ui (1.2.7) unstable; urgency=low
* Support for VDD2 / GPU settings (only smart reflex for now)
* Fixed bug where incorrectly installed OPPtimizer always thinks there are updates available

Please test. Lots of changes to add that VDD2 SR so could be a bug somewhere.
6 files changed, 150 insertions(+), 42 deletions(-)

http://www.appcheck.net/storage/oppt....2.7_armel.deb
is there any reason that on first page and thread topic is still 1.2.6?

Timpaxi 2012-08-02 18:47
Re: overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.6]
 
Quote:
Originally Posted by Creamy Goodness (Post 1246343)
opptimizer-ui (1.2.7) unstable; urgency=low
* Support for VDD2 / GPU settings (only smart reflex for now)
* Fixed bug where incorrectly installed OPPtimizer always thinks there are updates available

Please test. Lots of changes to add that VDD2 SR so could be a bug somewhere.
6 files changed, 150 insertions(+), 42 deletions(-)

http://www.appcheck.net/storage/oppt....2.7_armel.deb
Working fine, no problems.

Dragoss91 2012-08-02 21:40
Re: overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.6]
 
Quote:
Originally Posted by knobtviker (Post 1246367)
Testing now... so far running smooth as it should. Previous version fixed a bug for me on the same voltage...
Since I'm a real layman on this turf, can you explain to me what VDD2 / GPU settings are? :)
VDD2 is the smartreflex for gpu , wich is a power management system , I do not have enough knowledge to explain .

Now if disabling vdd2 is possible , people should try decreasing vcore on stable combinations with vdd1 off only . For example my device needs +0.04v to be stable at 1.3ghz

Creamy Goodness 2012-08-02 22:43
Re: overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.6]
 
Quote:
Originally Posted by kfahoo (Post 1246516)
is there any reason that on first page and thread topic is still 1.2.6?
because the UI will detect that and prompt people to update, so I wanted to wait 24 hours to make sure there's no bugs first.

-edit-
I guess it would be annoying to have an update prompt every day too...

kfahoo 2012-08-03 07:12
Re: overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.6]
 
do you use /etc/init/runlevel-switch.conf in any way?

Creamy Goodness 2012-08-03 16:00
Re: overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.6]
 
no, what's that?

kfahoo 2012-08-04 17:32
Re: overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.6]
 
not sure but after installing ui 1.2.7 I wanted to use dpkg and I got error with this conf and I thought that you might misspelled somewhere that path
but if not opptimizer I don't know what couse I haven't install anything else

(dpkg was lookin for runlgvel-switch.conf)

K-ly 2012-08-05 21:26
Re: overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.6]
 
Hello, i have a question/problem

when i open the opptimizer, the raw output says
"failed to execute loader"
and i can't overclock the phone, i did everything by the letter except the moment to install opptimizer and ui from terminal, because when i put /home/user/MyDocs incept opptimi.... appeared an error, and i had to install those files from filebox, it's that why i can't opptimize? how can i fix it? :S

Mikkosssss 2012-08-05 21:41
Re: overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.6]
 
Quote:
Originally Posted by K-ly (Post 1247970)
Hello, i have a question/problem

when i open the opptimizer, the raw output says
"failed to execute loader"
and i can't overclock the phone, i did everything by the letter except the moment to install opptimizer and ui from terminal, because when i put /home/user/MyDocs incept opptimi.... appeared an error, and i had to install those files from filebox, it's that why i can't opptimize? how can i fix it? :S
You need to incept from terninal or it wont work.

Do you have inception installed?

And you need to tell what error you got so we can help. :)

K-ly 2012-08-05 22:33
Re: overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.6]
 
Quote:
Originally Posted by Mikkosssss (Post 1247978)
You need to incept from terninal or it wont work.

Do you have inception installed?

And you need to tell what error you got so we can help. :)
Okey, i have install inception with help of a very nice video-guide from one of the users from here, and when i'm in terminal i do this:

devel-su
password
cd /home/user/MyDocs/
incept opptimizer_1.5.4_armel.deb

next the error : sh: incept: not found

and then i install directly from filebox but i will unnistall it (the opptimizer), i have to do it from terminal o just go to aplication opptimizer unninstall?

thank you for answering!

kfahoo 2012-08-06 09:19
Re: overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.6]
 
/usr/sbin/incept opptimizer_1.5.4_armel.deb

K-ly 2012-08-06 19:50
Re: overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.6]
 
Quote:
Originally Posted by kfahoo (Post 1248189)
/usr/sbin/incept opptimizer_1.5.4_armel.deb
I know but when i tried to move the files to that location the filefox display a message saying that i dont jave permission to move them there, so a placed them in MyDocs and tried to install it from there
how do i remove now opptimizer just unninstalling ig
t?

Mikkosssss 2012-08-06 21:29
Re: overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.6]
 
if you have dep files in Mydocs you need to do this.

cd /home/user/MyDocs/
/usr/sbin/incept opptimizer_1.5.4_armel.deb

Arie 2012-08-06 22:33
Re: overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.6]
 
Quote:
Originally Posted by Dragoss91 (Post 1246658)
VDD2 is the smartreflex for gpu , wich is a power management system , I do not have enough knowledge to explain .

Now if disabling vdd2 is possible , people should try decreasing vcore on stable combinations with vdd1 off only . For example my device needs +0.04v to be stable at 1.3ghz
Can someone please explain what this VDD2 is, and Dragoss explain what you mean by +0.04v, this is above my head....

Dragoss91 2012-08-06 23:08
Re: overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.6]
 
Quote:
Originally Posted by Arie (Post 1248469)
Can someone please explain what this VDD2 is, and Dragoss explain what you mean by +0.04v, this is above my head....
My device needs more 40000 uv to run stable if I enable VDD2 .

Arie 2012-08-06 23:13
Re: overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.6]
 
Quote:
Originally Posted by Dragoss91 (Post 1248479)
My device needs more 40000 uv to run stable if I enable VDD2 .
What does VDD2 do for the N9 and what are the side effects if it's on or off?

Dragoss91 2012-08-07 01:05
Re: overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.6]
 
Quote:
Originally Posted by Arie (Post 1248481)
What does VDD2 do for the N9 and what are the side effects if it's on or off?
I mentioned before I do not have enough knowledge to explain better . I know it's some chip that reduces power consumption ... useless if it needs a major voltage increase for working . And if I OVERclocked my device , that means I don't really care too much about battery life . I am using SR1 and SR2 when I am running out of battery and return to stock frequency and voltage .

I am not right and not wrong ... this is my personal opinion , when it comes to overclocking I've always avoided extra systems related to power management due to instability .

I know you are asking me to see if I know what I am talking about . Maybe I am totally wrong , but with my personal experience in overclocking I can say MY N9 and MY N900 consume less power with SR off and a lower voltage at a overclocked cpu speed (I am not sure about the others , that's why I highlighted "MY"). I just can not see how a system could reduce power consumption when it needs a lot more power to work . :rolleyes:

K-ly 2012-08-07 01:12
Re: overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.6]
 
Quote:
Originally Posted by Mikkosssss (Post 1248444)
if you have dep files in Mydocs you need to do this.

cd /home/user/MyDocs/
/usr/sbin/incept opptimizer_1.5.4_armel.deb
Thank you it works great!

Arie 2012-08-07 01:30
Re: overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.6]
 
Quote:
Originally Posted by Dragoss91 (Post 1248497)
I mentioned before I do not have enough knowledge to explain better . I know it's some chip that reduces power consumption ... useless if it needs a major voltage increase for working . And if I OVERclocked my device , that means I don't really care too much about battery life . I am using SR1 and SR2 when I am running out of battery and return to stock frequency and voltage .

I am not right and not wrong ... this is my personal opinion , when it comes to overclocking I've always avoided extra systems related to power management due to instability .

I know you are asking me to see if I know what I am talking about . Maybe I am totally wrong , but with my personal experience in overclocking I can say MY N9 and MY N900 consume less power with SR off and a lower voltage at a overclocked cpu speed (I am not sure about the others , that's why I highlighted "MY"). I just can not see how a system could reduce power consumption when it needs a lot more power to work . :rolleyes:
Actually I was asking to learn, thank you for the explanation.

Creamy Goodness 2012-08-07 07:49
Re: overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.6]
 
VDD1 is the CPU and GPU because they're on the same chip (MPU), VDD2 is the "l3 bus" that the MPU uses to read and write to main memory, flash storage, USB, the display, the camera, and everything else.
The bus is used more at higher MPU frequencies, but since we didn't touch the clock speed of it, increasing the voltage shouldn't be required.

Kabouik 2012-08-08 11:32
Re: overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.6]
 
I experience many reboots in PR 1.3 overclocked to 1150, especially when I use the phone, but not only (sometimes I just see it rebooting while it is on the desk with low-power screen displayed). In PR 1.2 I overclocked to 1200 and I don't remember of any reboot. Is it only due to my device, or did something change whith how voltage is managed? Am I the only one to experience a stability loss with the N9 and the last version of Opptimizer?

Hacker 2012-08-08 14:43
Re: overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.6]
 
Quote:
Originally Posted by Kabouik (Post 1249081)
I experience many reboots in PR 1.3 overclocked to 1150, especially when I use the phone, but not only (sometimes I just see it rebooting while it is on the desk with low-power screen displayed). In PR 1.2 I overclocked to 1200 and I don't remember of any reboot. Is it only due to my device, or did something change whith how voltage is managed? Am I the only one to experience a stability loss with the N9 and the last version of Opptimizer?

It sounds to me like your values aren't working and are destabilizing your N9. Overclocking is always do-at-your-own-risk, but here is my set_up:

I am running version 1.2.5 with the 1.5.4 kernel module version.
I have custom voltage activated and Smart Reflex activated.
Frequency (MHz) is 1375.
Voltage is 1375000.
I have run well over 36000 test iterations at these levels without a single reboot! And I have been operating at this level for months.

Good luck with whatever you decide to do!

Kabouik 2012-08-08 21:32
Re: overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.6]
 
Yes of course I understand that overclocking is do-at-your-own-risk, no problem with that.

But the fact is that I did not change anything between my configuration for PR 1.2 and my configuration for PR 1.3, except updating Opptimizer to the correct version. I have Smartreflex VDD1 and VDD2 activated, and no custom voltage.

I run 1.2.7 version with kernel 1.5.4. In PR 1.2 I was running at 1150 or 1200 MHz, and successfully passed the iterations step at 1300 (but decided not to use it). Now, in PR 1.3 with the updated Opptimizer, even 1250 makes the N9 to reboot during the iterations, and 1150 is highly unstable. I don't know if it comes from my device or other stuff I may have screwed up in config files (or by installing stuff like Faster N9), or if somebody else experiences the same issues since the update. Hence the question! :)

capnkirk 2012-08-09 08:38
Re: overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.6]
 
I've been running opptimiser UI 1.2.7 since Creamy posted it here and haven't had any issues at all.

With regards to the SmartReflex switches this is what I've found with my N9:
SR1 disabled
SR2 enabled
Custom Voltage 1.30V
Maximum stable frequency: 1140MHz


SR1 disabled
SR2 disabled
Custom Voltage 1.30V
Happily purrs along at a frequency of 1250MHz. No reboots.

Supposedly ramping up the MPU_CLOCK (VDD1 domain) should be uneffected by SR2, which controls VDD2 domain. Yet I can gain an extra 100MHz when I disable SR2, just as Dragoss mentioned.

Creamy Goodness 2012-08-09 20:04
Re: overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.6]
 
I was hoping it's Dragoss's device since that makes no sense. Thanks for letting us know, though.

superleggera 2012-08-15 19:00
Re: overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.6]
 
Hi,

Been following this thread, thanks for the excellent work, makes a noticeable difference to my N9.

I've read through this thread, but there doesn't seem to be much in the way of people posting their best clock/voltage combinations. This OMAP 3630 chipset runs natively at up to 1.2ghz anyway, so I would expect it to be stable at that clock speed so I'm not too concerned by running at that speed, it's the voltages I'm not sure about :-)

kfahoo 2012-08-20 21:56
Re: overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.6]
 
I have noticed that when phone is overclocked I have problem with installing bigger apps either from store and manually, anyone else noticed that issue or is it only my phone?

JadHusin 2012-08-24 04:40
Re: overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.6]
 
I got the "operation not permitted error (do you have the right credentials?)" error from this command : /usr/sbin/. Is this related to NITDroid? I have NITDroid installed on my Nokia N9.

Zion~ 2012-09-01 06:45
Re: overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.6]
 
Anyone safely overclocking at 1300 MHz?

Arie 2012-09-01 06:51
Re: overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.6]
 
Quote:
Originally Posted by Zion~ (Post 1258901)
Anyone safely overclocking at 1300 MHz?
I've done it, but I'd suggest to stay away from overclocking to 1300, I stick to stock voltage and as far as I can push that 1150mhz is the best for me.

Zion~ 2012-09-01 06:59
Re: overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.6]
 
Quote:
Originally Posted by Arie (Post 1258903)
I've done it, but I'd suggest to stay away from overclocking to 1300, I stick to stock voltage and as far as I can push that 1150mhz is the best for me.
Hmm, odd just tried these settings and my device rebooted.
Default voltage is 1225000, no?

Arie 2012-09-01 07:05
Re: overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.6]
 
Quote:
Originally Posted by Zion~ (Post 1258904)
Hmm, odd just tried these settings and my device rebooted.
Default voltage is 1225000, no?
I have similar voltage, set it to 1150mhz, if that doesn't work drop it to 1125mhz.

Zion~ 2012-09-01 07:08
Re: overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.6]
 
Quote:
Originally Posted by Arie (Post 1258907)
I have similar voltage, set it to 1150mhz, if that doesn't work drop it to 1125mhz.
I'm at 1140 MHz

Arie 2012-09-01 07:11
Re: overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.6]
 
Quote:
Originally Posted by Zion~ (Post 1258909)
I'm at 1140 MHz
Then stay there :)

Zion~ 2012-09-01 07:13
Re: overclocking kernel modules + UI for PR1.3 [ko v1.5.4] [ui v1.2.6]
 
Quote:
Originally Posted by Arie (Post 1258910)
Then stay there :)
Spoke too soon, after the tests are completed my device restarts itself shortly after.

Even at 1125.


All times are GMT. The time now is 05:51.
Page 27 of 33 « First 172526 27 2829 Last »
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8