Originally Posted by Ryuokii (Post 887370)

But does your password reset to factory default (12345)? Mine remains the same, which is strange I think...

Originally Posted by ammyt (Post 868864)

I have a windows 7 32bit flashed my N900 7 times till now:
1. the process is extensive but quite comprehensive
2. you'll need to know ur imei for software downloads
Now roll up ur sleeves we'll bring ur N900 back to life!:D:
1. go to tablets-dev.nokia.com/nokia_N900.php
2. there r clear instructions on how to find and enter ur imei
3. after that throw the eula in a trash and click I agree
4. find RX-51_2009SE_20.2010.36-2_PR_COMBINED_MR0_ARM.bin latest global release for Maemo 5 and click on it then download it
5. find RX-51_2009SE_10.2010.13-2.VANILLA_PR_EMMC_MR0_ARM.bin latest vanilla emmc content click on it then download it
6. place ur 2 .bin in the folder where maemo flasher was installed (e.g. C:/program files/maemo)
Now u should have the 3 required files for flashing:
1. flasher 3.5
2. RX-51_2009SE_10.2010.13-2.VANILLA_PR_EMMC_MR0_ARM.bin emmc content
3. RX-51_2009SE_20.2010.36-2_PR_COMBINED_MR0_ARM.bin fiasco (OS)
The following procedure is the important one:
1. Be sure ur N900 has at least 50% of its battery charge
2. disconnect any internet connections (this is the issue with windows 7)
3. go to start menu then in the search type maemo flasher u should find it.
4. click on it it will open a cmd window
5. connect ur usb cable in ur pc not in the N900 yet
6. open ur N900's keyboard and press u button and keep holding it while plugging the usb cable in ur N900
7. faded Nokia logo with usb icon on top right corner shall appear
8. ur cool stop holding the u button now or ull suffer from finger constipation :P
9. returning to maemo flasher issue this command:
flasher-3.5.exe -F RX-51_2009SE_20.2010.36-2_PR_COMBINED_MR0_ARM.bin -f (u can copy and paste it in maemo flasher)
10. HIT ENTER the windows 7 screen about allow and don't allow should appear click allow another cmd window shall appear it will show the flashing status takes about 5mins
11. after it finishes the other cmd window will close and u return to maemo flasher issue this command:
flasher-3.5.exe -F RX-51_2009SE_10.2010.13-2.VANILLA_PR_EMMC_MR0_ARM.bin -f -R
12. the same other cmd window will appear showing flasing status after it finishes ur N900 will reboot
13. disconnect ur usb cable close flasher be happy :)
Now a bit work with ur N900
1. once ur N900 reboot open the ur battery cover, remove the battery, and yep we're not letting it boot
2. with the battery removed press the power button long press it for 5 seconds to leave away any static electricity from usb connecting
3. count 30 seconds then plug ur battery back do not put back the cover.
4. boot ur N900 by pressing the power button ur N900 should boot happily although it will take time with the 5 dots in the booting process
5. after it boots ull get the seetings of time and date etc...
6. put the cover back and brick ur N900 again :P
p.s. if ur led flashes orange when ur N900 boots after flashing NO WORRIES just repeat the takeoff battery static electricity process

If you're using custom EMMC just rename the custom emmc to RX-51_2009SE_10.2010.13-2.VANILLA_PR_EMMC_MR0_ARM.bin