maemo.org - Talk
Page 3 of 48 12 3 4513 Last »
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   Applications (https://talk.maemo.org/forumdisplay.php?f=41)
-   -   [Announce] Yet another MITM attack script (Yamas-ARM) (https://talk.maemo.org/showthread.php?t=73988)

anapospastos 2011-06-14 14:51
Re: [Announce] Yet another MITM attack script (Yamas-ARM)
 
I reinstalled enhanced busybox and now it's working.

comaX 2011-06-14 15:06
Re: [Announce] Yet another MITM attack script (Yamas-ARM)
 
Quote:
Originally Posted by stevomanu (Post 1028945)
im getting this error any ideas why

Code:

cat: cannot open '/temp/yamas.txt' : no such file or directory

i have wget installed but still same issue ..

great script thou thanks for all help
Hi ! I'm the one who wrote the script. It's great to see people reacting so much in such a short time !

Regarding this error, the path to which the log is saved should be /tmp/ and not /temp/

Quote:
Originally Posted by laasonen (Post 1028966)
Decided to give the script a shot. At least my laptop running Arch Linux on WPA2-PSK protected WLAN staid secure.
There is a more complete version available on my website http://comax.pagesperso-orange.fr if you want to run it on a laptop.

Quote:
Originally Posted by vi_
EVERYONE ELSE. Make sure you run this script as root, DOH!
Yup !

Please report any error either by mail directly to me (you'll find it on my website), or on pcscience.info page. You can of course post it here to get help from members, but I might not check very often...

I hope you like it, cheers !

vi_ 2011-06-14 15:08
Re: [Announce] Yet another MITM attack script (Yamas-ARM)
 
Quote:
Originally Posted by comaX (Post 1028997)
Hi ! I'm the one who wrote the script. It's great to see people reacting so much in such a short time !

Regarding this error, the path to which the log is saved should be /tmp/ and not /temp/



There is a more complete version available on my website http://comax.pagesperso-orange.fr if you want to run it on a laptop.



Yup !

Please report any error either by mail directly to me (you'll find it on my website), or on pcscience.info page. You can of course post it here to get help from members, but I might not check very often...

I hope you like it, cheers !
Holy fvck, you are comaX!

Your script rulez.

You rulez.

Thank you for your contribution.

stevomanu 2011-06-14 15:40
Re: [Announce] Yet another MITM attack script (Yamas-ARM)
 
my bad i added an e in there the problem is


Code:

cat: cannot open '/tmp/yamas.txt' : no such file or directory
..

cutehunk04 2011-06-14 15:42
Re: [Announce] Yet another MITM attack script (Yamas-ARM)
 
sorry for asking silly question... but what exactly this application does..??

bipinbn 2011-06-14 15:58
Re: [Announce] Yet another MITM attack script (Yamas-ARM)
 
Quote:
Originally Posted by comaX (Post 1028997)
Hi ! I'm the one who wrote the script. It's great to see people reacting so much in such a short time !

Regarding this error, the path to which the log is saved should be /tmp/ and not /temp/



There is a more complete version available on my website http://comax.pagesperso-orange.fr if you want to run it on a laptop.



Yup !

Please report any error either by mail directly to me (you'll find it on my website), or on pcscience.info page. You can of course post it here to get help from members, but I might not check very often...

I hope you like it, cheers !
Comax..you are the boss..respect and thanks :)

I am done installing nmap,ettercap-ng and sslstrip...everything went fine without issues.

I am now running the script and facing the following issues:

Attack is running. You can :
1. Rescan network.
2. Add a target (useless if targeting whole network).
3. Display ASCII correspondence table.
4. Tail-grep hosts through output (make sure there is traffic).
5. Real-time parsing...
6. Quit properly.

Enter the number of the desired option.
mitm_pcsci3nce.sh: line 393: xterm: not found


When i select option 4 i get the "xterm:not found" error.

And also after i scan the network and add a target how do i get the username and passwords

Thanks for the script again

bipinbn 2011-06-14 16:33
Re: [Announce] Yet another MITM attack script (Yamas-ARM)
 
Quote:
Originally Posted by bipinbn (Post 1029035)
Comax..you are the boss..respect and thanks :)

I am done installing nmap,ettercap-ng and sslstrip...everything went fine without issues.

I am now running the script and facing the following issues:

Attack is running. You can :
1. Rescan network.
2. Add a target (useless if targeting whole network).
3. Display ASCII correspondence table.
4. Tail-grep hosts through output (make sure there is traffic).
5. Real-time parsing...
6. Quit properly.

Enter the number of the desired option.
mitm_pcsci3nce.sh: line 393: xterm: not found


When i select option 4 i get the "xterm:not found" error.

And also after i scan the network and add a target how do i get the username and passwords

Thanks for the script again


resolved after doing "apt-get install xterm"

thanks
Bipin

Unhuman 2011-06-14 16:41
Re: [Announce] Yet another MITM attack script (Yamas-ARM)
 
Script is still beta sort of speak. Will take a look at the tail-grep option. However, the main function of the script works flawlessly.

Main post is updated. I will not answer questions as 'what does this do' and etc. .. This script isn't a joke. If you don't know what this is for, you shouldn't even download it.

vi_ 2011-06-14 22:52
Re: [Announce] Yet another MITM attack script (Yamas-ARM)
 
Quote:
Originally Posted by Unhuman (Post 1029062)
Script is still beta sort of speak. Will take a look at the tail-grep option. However, the main function of the script works flawlessly.

Main post is updated. I will not answer questions as 'what does this do' and etc. .. This script isn't a joke. If you don't know what this is for, you shouldn't even download it.

Point 1. This doesn't work by your instructions.
Point 2. Please explain this error here:

Code:
Enter IP adresse(s).
192.168.1.2
 Targeting 192.168.1.2 on 192.168.1.1 on wlan0 with Ettercap

 Attack should be running smooth, enjoy.


Warning: Cannot convert string "nil2" to type FontStruct

Attack is running. You can :
1. Rescan network.
2. Add a target (useless if targeting whole network).
Point 3. Does this actually require a working version of 'arpspoof' installed.

Creamy Goodness 2011-06-15 01:37
Re: [Announce] Yet another MITM attack script (Yamas-ARM)
 
you guys are "evil" but also increasing the value of the n900... :)
I thought this was going to make a fake AP but someone mentioned arp poisoning, I guess it works on whatever network you are associated then? I wonder how it works though, if it lets you do any target website, is the n900 pretending to be the default gateway?


All times are GMT. The time now is 03:58.
Page 3 of 48 12 3 4513 Last »
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8