maemo.org - Talk
Page 3 of 3 12 3
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   Nokia N810 (https://talk.maemo.org/forumdisplay.php?f=28)
-   -   Video call with N810 (https://talk.maemo.org/showthread.php?t=77495)

jmart 2011-10-11 20:50
Re: Video call with N810
 
I believe the 66.35.236.25 address stopped working. I have since updated mine with 64.14.59.165. So, your commands would be:

$ gconftool --type string --set /system/osso/supl/agps_srv_address "64.14.59.165"

$ gconftool --type string --set /system/osso/supl/slp_address "64.14.59.165"

rimadreamer 2011-10-13 07:56
Re: Video call with N810
 
actually, i was able to connect n810 to laptop the first time, but when i am trying to connect the USB port again, my laptop does not recognize the drives from n810. and from the USB networking on the n810 i get this error message "module insertion failed".

rimadreamer 2011-10-13 11:59
Re: Video call with N810
 
Quote:
Originally Posted by n9ots (Post 1107108)
did you enable virtual memory (control panel > memory > virtual)?
this will keep the device from connecting via usb

Reread your post. wondering if you installed usbeth app. if so you also need to install usbcontrol for it to work.
first use usb control to set device to host mode
then attempt usb networking

never tried this myself ... just read instructions for apps
Thank you for ur response...i did try installing both usbeth app and usbcontrol...but did not work..

n9ots 2011-10-13 12:38
Re: Video call with N810
 
if you are attempting to access your network via usb the following thread may help;
talk.maemo.org/showthread.php?t=23055

good luck

rimadreamer 2011-10-22 07:57
Re: Video call with N810
 
Hello,
I went through this thread : talk.maemo.org/showthread.php?t=23055,
but the wiki entry link in the thread does not seem to be working.
am i missing anything ?
also after installing the file from link:
http://www.electronicproductonline.c....3.0_armel.deb
do i need to run any code in xterm ?
the USB networking from control panel still gives me the same error
"Module Insertion has failed"
pls let me know what needs to be done to fix this error ?

ee_gary 2011-11-03 18:17
Re: Video call with N810
 
Quote:
Originally Posted by lma (Post 1100142)
Not the case, it's just that both sides need to have common codecs. Video calls work fine between the N810 and empathy for instance.
Do you know of a client for the Mac that allows video calls with the N8x0? I have looked exhaustively but been unable to find something that worked.

lma 2011-11-04 00:54
Re: Video call with N810
 
I'm the wrong person to ask about Macs, but it looks like empathy at least is available via both fink and macports.


All times are GMT. The time now is 05:19.
Page 3 of 3 12 3
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8