Re: Audio volume and vibration very low on nokia n9
 

Volume for videos & music are in purple.
Ringtones in blue. Click on the "Ringing" it will appear. You can either slide it with your finger or use the buttons at the side.

Vibration, Touchscreen Vibration can be changed up to level 3 max. I find the vibration strong, can feel it in my pocket everytime an update or sms,etc comes. ;)
Ringtone depends on the tune used, I dont put it on max anyway, use vibrate more. I also have the "Dolby Sound" enabled for both music & video.

Re: Audio volume and vibration very low on nokia n9
 

I'm not talking about touch screen vibrations, I am talking about vibration for incoming calls, sms, and emails. Am I missing something here?

Re: Audio volume and vibration very low on nokia n9
 

It could just be me, but vibration is stronger at Level 3, not a big difference but a difference.

Under "Vibration Profile", are the blue boxes enabled? If not, no vibration

Re: Audio volume and vibration very low on nokia n9
 

Yes, I thought this was mandatory for vibration via calls and sms.

Call and sms vibration was not stronger via increasing touch screen vibration to level 3. I think it's just you. Though it could be hopeful thinking on my behalf that it's not just you.

Re: Audio volume and vibration very low on nokia n9
 

I noticed that if under 'Silent' mode, Vibration is not enabled. I had to slide it over to enable it

Re: Audio volume and vibration very low on nokia n9
 

===========================
buzzzzzzzzzzz
well I have solution if u all wanna try it. :)
i promise the predrive volume will be always to 100% even after a call and plugin and plugout of ear or headphones and even after reboot of ur nokia N9. 1st u have to remove tweak s : 4 for changing predrive volume to 100% after reboot from N9QT
the methods are: goto this path "/usr/share/pulseaudio/alsa-mixer/paths" in ur phone root without the quote and select 'nokia-dfl61-twl4030-output-ihfandheadset.conf and nokia-dfl61-twl4030-output-headset-call.conf and nokia-dfl61-twl4030-output-ihf.conf'-this three files.
copy down all three files into your system and open it using any editor (eg c-free 5.0 "in case of mine")
and edit the line with [Element PreDriv]
volume = 2' for all three files
change volume = (2 to 3) for all three file and Yo except value 3 1 n 2 if u input else (100, 20 any value the u have to rum n9 terminal every after each boot up to fix alsamixer predrive to 100% manually ;)
coz in the Element PreDriv
volume = 0(means 0 u know it logical)
volume = 1(means 33% not 10 or else)
volume = 2(means 67% default) and volume = 3(is 100%.. ;)
u don't believe ya am sure u ain't check urself try it..frns.. ;)"DONNOT CHANGE ANY OTHER VALUES OR ELSE WILL end up with no sound if mistaken ;)"
after making change save the file as it is no further change if u wanna get irritate with ur n9 then change more value as ur wish.. :)
now the real things.. how to feed this values into the phone root files..
??? any clue.. :)
use 'filebox root' from N9qt of u can run terminal command if u know how to run copy n replace command in terminal.. :cool: (yea every1 knows :) kidding:P) :rolleyes:
"if u get ur phone with NO sound then its not my fault. coz all u did is error in the file editing am not responsible for any.."