maemo.org - Talk
Page 3 of 4 12 3 4
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   MeeGo / Harmattan (https://talk.maemo.org/forumdisplay.php?f=45)
-   -   N9 security code reset (https://talk.maemo.org/showthread.php?t=80154)

Golden-Boy 2013-08-27 21:17
Re: N9 security code reset
 
Quote:
Originally Posted by juiceme (Post 1369655)
Now this is something unheared of???
You mean you had no security code on before, and you bashed your phone to floor and somehow it got activated??
Yes, but it only fell about 30 cm. Not far, but now the security code nonsense is here :(

Quote:
I am afraid if that happened so it must be something else, possibly uncorrectable by SW fix or device flashing... It might be that you damaged something inside the phone so that some pins on chips are either shorted or disconnected, thus the device thinks it's security locked.

With this, the only fix is to deliver to Nokia Care, where they will propably notice they cannot do anything about it. --> it's broken beyond any repair :(
I would still like to try flashing it. There is important data on the phone. I have just downloaded Pheonix. Can you please tell me what to do from here?

Golden-Boy 2013-08-28 01:32
Re: N9 security code reset
 
I would still like to try flashing it. There is important data on the phone. I have just downloaded Pheonix. Can you please tell me what to do from here?

rainisto 2013-08-28 13:33
Re: N9 security code reset
 
1st dont use Phoenix since that wont do you any good, as it will also erase emmc.

Just use the normal flasher binary to flash the device, you can save your mmc partition with that one if you only flash the firmware side.

Guide is in here http://talk.maemo.org/showthread.php?t=82693

Golden-Boy 2013-08-30 20:42
Re: N9 security code reset
 
Quote:
Originally Posted by rainisto (Post 1370084)
1st dont use Phoenix since that wont do you any good, as it will also erase emmc.

Just use the normal flasher binary to flash the device, you can save your mmc partition with that one if you only flash the firmware side.

Guide is in here http://talk.maemo.org/showthread.php?t=82693
Hello Rainisto,

Thank you for responding. Can you please send me an email because there is a private matter I wish to discuss with you.

Thank you

Alex

allegation@gmail.com

hrbani 2014-02-26 11:43
Re: N9 security code reset
 
Hi
Is there a similar way for N9 like this?

juiceme 2014-02-26 12:55
Re: N9 security code reset
 
Quote:
Originally Posted by hrbani (Post 1414409)
Hi
Is there a similar way for N9 like this?
No, (un)fortunately not.
N9 is somewhat hardened, not like N900.

vincr 2014-04-03 13:02
Re: N9 security code reset
 
How to reset the securitycode when it says that there is no code assigned to my phone but when I want to change this code it asks me for a code..

nieldk 2014-04-03 14:47
Re: N9 security code reset
 
default code is :P 12345

vincr 2014-04-03 14:52
Re: N9 security code reset
 
I already tried that code offcourse :)

peterleinchen 2014-04-03 18:38
Re: N9 security code reset
 
Quote:
Originally Posted by vincr (Post 1419748)
How to reset the securitycode when it says that there is no code assigned to my phone but when I want to change this code it asks me for a code..
Does it ask you to input an existing code to enter the next screen? Or does it you to define a new code?
In the latter case you are in open mode (but there is a solution available by HtheB).

Quote:
Originally Posted by nieldk (Post 1419753)
default code is :P 12345
Niel, tss, tss. ;)
12345 was THE security code up to N900/808.
The N9 had as default: 'not defined'.


All times are GMT. The time now is 21:09.
Page 3 of 4 12 3 4
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8