maemo.org - Talk
Page 3 of 3 12 3
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   Nokia N9 / N950 (https://talk.maemo.org/forumdisplay.php?f=51)
-   -   [HELP] My N9 CALL Volume is Low (https://talk.maemo.org/showthread.php?t=83361)

thedead1440 2013-01-30 09:57
Re: [HELP] My N9 CALL Volume is Low
 
Quote:
Originally Posted by nbedford (Post 1319038)
Really, I thought the N9QT vol patche was based on all previous I had seen which got reset after call. If this is true I will have to take another look.
The N9QT tweak asks you if you want to enable this at startup and if so it won't be brought down; its enabled in mine and see the below to see my current setting due to N9QT:

Code:
Simple mixer control 'PreDriv',0
  Capabilities: pvolume penum
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 3
  Mono:
  Front Left: Playback 3 [100%] [6.00dB]
  Front Right: Playback 3 [100%] [6.00dB]

bibek 2013-01-30 10:54
I dont know why but aftr doing a call, the speaker volume becomes normal again.
If I apply the tweak again, then volume boosts again. Weird.

And anything about earpiece volume? To increase in-call sound?

zlatko 2013-02-03 07:46
Re: [HELP] My N9 CALL Volume is Low
 
Just a follow up with my problem - all of a sudden call volume went back to normal on my device. That is without any intervention from my side.
I still can't tell if it was HW of SW related problem. But "all is well when end well" ;)

Mr.Pancake 2013-05-10 12:41
Re: [HELP] My N9 CALL Volume is Low
 
No solution?

Win7Mac 2013-05-14 22:36
Re: [HELP] My N9 CALL Volume is Low
 
Don't like the idea of blasting my speakers incidentally but would like to make use of N9QT tweak S, but not with 100%, rather something like 80-85%. Would that be possible?

As far as Schturman remembers from some russian forum it seems not. :(
Is that the last word?

mr666acdc 2014-01-15 17:49
Re: [HELP] My N9 CALL Volume is Low
 
I found the solution to icrease call volume(earpiece). Edit file
Code:
/usr/share/pulseaudio/alsa-mixer/paths/nokia-dfl61-twl4030-output-earpiece.conf
and change in
Code:
# Enable earpiece output from DAC2 left channel only.
[Element Earpiece Mixer AudioL1]
switch = off
[Element Earpiece Mixer AudioR1]
switch = off
[Element Earpiece Mixer AudioL2]
switch = on
[Element Earpiece Mixer Voice]
switch = off
[Element Earpiece]
volume = 2
to
Code:
volume = 3
Reboot. Until now the earpiece volume will be 100%, even after reboot/call.

mautz 2014-03-24 21:23
Re: [HELP] My N9 CALL Volume is Low
 
Even with the tips in the above post the call volume was too low on my N9, so i had to edit the file
Code:
/usr/share/pulseaudio/alsa-mixer/paths/nokia-dfl61-twl4030-output-earpiece.conf
even more.

I changed the volume limit in line 32 from 17 to 18:

Before:
Code:
volume-limit = 17 # steps 0-18, 0: -24dB 12: 0dB 17: 10dB 18: 12dB
After
Code:
volume-limit = 18 # steps 0-18, 0: -24dB 12: 0dB 17: 10dB 18: 12dB
and the volume limit of the Element DAC2 Digital Fine to 100(line 56)

Before:
Code:
[Element DAC2 Digital Fine]
volume = 61
After:
Code:
[Element DAC2 Digital Fine]
volume = 100
Maybe this is helpful for someone.

pmeuh 2014-03-26 19:12
Re: [HELP] My N9 CALL Volume is Low
 
mr666acdc & mautz: THANKS A LOT. You guys are legend !

I can now use my phone in loud environment such as Paris metro. Awesome! Ausgezeichnet!

mautz 2014-03-28 09:09
Re: [HELP] My N9 CALL Volume is Low
 
To get the call volume a bit more louder again, edit the file
Code:
/usr/share/pulseaudio/alsa-mixer/paths/nokia-dfl61-twl4030-output-earpiece.conf
.

Change

Code:
[Element DAC2 Digital Coarse]
Volume = 1
to

Code:
[Element DAC2 Digital Coarse]
Volume = 2
Do not set it to 3, it will reset it to 1 again, only 1 and 2 are possible.

Alexxxl 2014-05-13 11:11
Re: [HELP] My N9 CALL Volume is Low
 
gathered a simple package.
If there are ideas on completion - will be glad to hear.

https://openrepos.net/content/alexxxlrus/volume


All times are GMT. The time now is 18:20.
Page 3 of 3 12 3
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8