Re: [solved] n900 will not start after CSSU update
 

@panjgoori: Which kernel are you using? Do you have SD card inserted?

Re: [solved] n900 will not start after CSSU update
 

I have KP52 with bootmenu. I checked my phone both with SD card inserted and with no SD card in my phone. but still didn't faced any problem. i have syslog.

Re: [solved] n900 will not start after CSSU update
 

Hello

Same here. Yet I was able to boot by following:
1. remove SD card
2. put on wall charger
3. playing some time with power button - it booted after around tenth attempt.

I'm using power kernel. Now I'm installing syslogd to try to reproduce this condition.

Re: [solved] n900 will not start after CSSU update
 

i removed wall charger when HAM started installing update. and yes there was no sd card in my phone at first boot. and also my N900 started at the first attempt when HAM rebooted it to completely install update and booted back without even a single problem.

Re: [solved] n900 will not start after CSSU update
 

Idea - let's more this into cssu-t thread, as [solved] in title here is severely miss-leading. I would preffer to see info about progress/lack off in cssu thread, than in some random one, where OP considered his own problem as closed/solved.

/Estel

Re: [solved] n900 will not start after CSSU update
 

Syslog: http://pastebin.com/6sYspitX

Re: [solved] n900 will not start after CSSU update
 

same problem here, after several attempt by removed SIM and battery and wait for few minutes i can boot with SD card inserted

syslog :

Re: [solved] n900 will not start after CSSU update
 

My N900 is alternating between won't boot/won't recognize the two last SD cards that were used in it.

Re: [solved] n900 will not start after CSSU update
 

guys, could someone who suffers from "boot loop with SD card in" problem and is with stock kernel (omap1), install system-services_0.3.8-68+0cssu6_armel.deb and upstart_0.3.8-68+0cssu6_armel.deb from http://merlin1991.at/~freemangordon/upstart/ and check if the problem is solved. Make sure you have backup before installing, just in case.

Re: [solved] n900 will not start after CSSU update
 

Can I install it from the recovery console ?
I have u-boot and couple of kernels, power51r1, power52, omap1, omap1-fb. On all kernels i got a reboot loop. How can I install it?