maemo.org - Talk
Page 3 of 4 12 3 4
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   The Other Half (https://talk.maemo.org/forumdisplay.php?f=59)
-   -   I2C Tool for Jolla (https://talk.maemo.org/showthread.php?t=92329)

kimmoli 2014-07-09 13:56
Re: I2C Tool for Jolla
 
News

New version of i2ctool (0.3) is now available at OpenRepos, https://openrepos.net/content/kimmoli/i2c-tool

hopefully soon also at Jolla store, it will go through thorough testing by QA first.

Short users-guide is also available for download, https://app.younited.com/?shareObjec...2-464ebc35c4b0

Updated MyHalf V1.20 also available from OSHPark https://oshpark.com/shared_projects/6TWMNB35

ninepine 2014-07-09 21:24
Re: I2C Tool for Jolla
 
Quote:
Originally Posted by kimmoli (Post 1409356)
NOTE This is outdated design - please look Devaamo V1.20
Files in my github: https://github.com/kimmoli/devaamoMyhalf

Additional to the software, there is also hardware available.

Old version eagle files also in https://github.com/kimmoli/myhalf
bill of materials in readme

You can easily order this board from OSHPark - 3 pcs for $17.50
Hello Kimmo

I'm very interested in getting a v1.2 Myhalf for my Jolla. I can see that it is possible to order a V1.1 from OSH Park but see that this isn't the latest version.

I've tried downloading the the v1.2 files in your GitHub but these don't seem to be Eagle files and aren't accepted by OSH Park.

Can you suggest how I can get a copy of the v1.2 myhalf board please??

Many thanks

Mike

(PS I would use a v1.1 board but i'm not sure if you replaced it because it didn't work or just because v1.2 had bigger pogopins?

kimmoli 2014-07-10 04:02
Re: I2C Tool for Jolla
 
Quote:
Originally Posted by ninepine (Post 1432317)
I've tried downloading the the v1.2 files in your GitHub but these don't seem to be Eagle files and aren't accepted by OSH Park.
the .brd -file is the one accepted by OSHPark, and it uploaded wo issues. Now shared there --> https://oshpark.com/shared_projects/6TWMNB35

The cam (gerber) files you can use to order from e.g. itead.

Quote:
Originally Posted by ninepine (Post 1432317)
(PS I would use a v1.1 board but i'm not sure if you replaced it because it didn't work or just because v1.2 had bigger pogopins?
There aren't any big problems with v1.10. pogopads are little missaligned, and small - fixed in v1.20

Also v1.20 has place for SMD pinheader.

I don't know did someone order a batch of these (and could have extra one)? - I don't have any left.

ninepine 2014-07-10 20:37
Re: I2C Tool for Jolla
 
Quote:
Originally Posted by kimmoli (Post 1432336)
the .brd -file is the one accepted by OSHPark, and it uploaded wo issues. Now shared there --> https://oshpark.com/shared_projects/6TWMNB35

The cam (gerber) files you can use to order from e.g. itead.



There aren't any big problems with v1.10. pogopads are little missaligned, and small - fixed in v1.20

Also v1.20 has place for SMD pinheader.

I don't know did someone order a batch of these (and could have extra one)? - I don't have any left.
Thanks.I've just noticed the link you included to the V1.2 file on OSH Park and will try this instead. In the meantime I ordered a 1.1 version which I now regret...

Mike

kimmoli 2014-07-11 07:24
Re: I2C Tool for Jolla
 
Quote:
Originally Posted by ninepine (Post 1432414)
In the meantime I ordered a 1.1 version which I now regret...
It's not THAT bad :rolleyes: I still use it myself.

I added STL files of printed clips also to the devaamoMyhalf -repo.
This one is suitable for 1.6mm pcb from OSHPark: https://github.com/kimmoli/devaamoMy...clip-1_6mm.stl

kimmoli 2014-07-14 10:01
Re: I2C Tool for Jolla
 
oo. First app using TOH I2C approved in harbour

https://lh6.googleusercontent.com/-9...ppapproved.jpg

nieldk 2014-07-14 10:49
Re: I2C Tool for Jolla
 
Quote:
Originally Posted by kimmoli (Post 1432680)
oo. First app using TOH I2C approved in harbour

https://lh6.googleusercontent.com/-9...ppapproved.jpg
:) good news

dirkvl 2014-09-25 11:15
Re: I2C Tool for Jolla
 
Quote:
Originally Posted by pichlo (Post 1440476)
A bit OT but I am not sure it deserves a new thread: dirvl, you might possibly make some buck by producing a "universal prototype TOH". Perhaps in two varieties, just the plastic cover and the plastic cover plus a universal PCB with the connectors at the right places. Perhaps even a third variety, same as #2 but with the I2C chip and some Arduino or whatnot soldered on.
Polling for demand of:

- TOH hardware developing tutorial
- Breadboard/developer TOH

pichlo 2014-09-25 12:09
Re: I2C Tool for Jolla
 
Quote:
Originally Posted by dirkvl (Post 1440498)
Polling for demand of:

- TOH hardware developing tutorial
- Breadboard/developer TOH
Sign me up.

pichlo 2014-09-26 22:00
Re: I2C Tool for Jolla
 
What, no one else?


All times are GMT. The time now is 23:38.
Page 3 of 4 12 3 4
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8