![]() |
Re: Aircrack-ng & Macchanger (fremantle/maemo 5)
I'm not sure that's right.
I'm not an expert, but I think that the firmware is only responsible for the physical touch, means sending and receiving packets, and doing exactly what the driver tells it to do. I've seen many wifi PC chipsets that supported injection and promiscuous mode only after patching the driver, and I believe that's what we are dealing with here. Considering that maemo is fully open source, I guess it shouldn't be too hard. |
Re: Aircrack-ng & Macchanger (fremantle/maemo 5)
Firstly, Maemo is not fully open source. There is a ton that has been closed off, and rightfully so.
Secondly, firmware is not solely responsible for Rx/Tx. The driver merely recommends, the firmware will complete the action. And if the firmware has been neutered to simply not allow packets to be sent down an unconfigured interface, it won't work. Unfortunately, only a few people actually know if this is the case. The "wifi pc chipsets" you so lawlessly talk about, do not have tertiary loadable firmware, they merely shipped with drivers or used stacks that did not allow it. Patches fixed that. and I don't mean to completely defecate on you, but you're not an expert, you just said so. So stop. KTHNX. MODS BE NICE TO ME. |
Re: Aircrack-ng & Macchanger (fremantle/maemo 5)
What is with that channel 6 problem? Is that fixed now ?
|
Re: Aircrack-ng & Macchanger (fremantle/maemo 5)
hey guys! there is a way to get aircrack-ng working on N900 by installing that debian image from the repositoriee and aircrack inside of it. For me it was working and i have got a handshake.....Moreover, airodump-ng is working as well so i suppose that there is a kernel problem in maemo system....
|
Re: Aircrack-ng & Macchanger (fremantle/maemo 5)
Quote:
|
Re: Aircrack-ng & Macchanger (fremantle/maemo 5)
Quote:
|
Re: Aircrack-ng & Macchanger (fremantle/maemo 5)
Quote:
|
Re: Aircrack-ng & Macchanger (fremantle/maemo 5)
Quote:
|
Re: Aircrack-ng & Macchanger (fremantle/maemo 5)
I have this installed on my n900 and i canīt find where is it. can some one pleas tell me that.. i dont see any icons for it..
--- Sorry for my eng i have dyslexi |
Re: Aircrack-ng & Macchanger (fremantle/maemo 5)
Quote:
|
Re: Aircrack-ng & Macchanger (fremantle/maemo 5)
Sorry but you have to install easy deb chroot ?
The aircrack that after you download is the same that are in the devel repository ? In this case I think it have a problem capturing data packets and is working only on channel 6. Thanks:) |
Re: Aircrack-ng & Macchanger (fremantle/maemo 5)
Yes i installed Easy Deb Chroot . No, it's not the same aircrack-ng package. I installed it from Debian x-terminal.
ps. so i'm from Milan ;) |
Re: Aircrack-ng & Macchanger (fremantle/maemo 5)
Quote:
hope it helps... |
Re: Aircrack-ng & Macchanger (fremantle/maemo 5)
Quote:
i installed aircrack-ng from debian repositories....(inside the image) |
Re: Aircrack-ng & Macchanger (fremantle/maemo 5)
aircrack-ng SVN was already compiled and pushed to the extras-devel repository. Works exactly the same as within a chroot.
|
Re: Aircrack-ng & Macchanger (fremantle/maemo 5)
Quote:
i am not so shure because i couldn't get airodump-ng to work in maemo but on the other hand it is working in debian. Why?:confused: |
Re: Aircrack-ng & Macchanger (fremantle/maemo 5)
Sorry for the question, but are you sure that is really working? can get IVs (other than your own network)?
It's not a kernel problem, if you install a debian chroot, it is using maemo's kernel, not debian's. Same with the wifi stack and firmware. If it works inside debian chroot and not in maemo, it's a software problem. |
Re: Aircrack-ng & Macchanger (fremantle/maemo 5)
Quote:
|
Re: Aircrack-ng & Macchanger (fremantle/maemo 5)
RFMON works sporadically. You can capture packets. The firmware, driver or stack (or a combination of all 3) do not currently like receiving or sending live packets when it's not associated to a BSSID.
This is being worked on, as we speak. |
Re: Aircrack-ng & Macchanger (fremantle/maemo 5)
Do i get this right ? There is no solution for scanning ALL channels. Only channel 6 shows up ?
Or did i miss something ? airodump-ng wlan0 gives me nothing. Only when my wlan is set to channel 6. |
Re: Aircrack-ng & Macchanger (fremantle/maemo 5)
I managed to scan other channels than 6 this way:
ifconfig wlan0 down rmmod wl12xx modprobe wl12xx iwconfig wlan0 mode monitor |
Re: Aircrack-ng & Macchanger (fremantle/maemo 5)
Quote:
I have tryed but with airodump-ng wlan0 it show only channel 6 and with airodump-ng -c 11 wlan0 he show also only channel 6. My wifi is on channel 11 and doesnt appear. Any idea ?:confused: |
Re: Aircrack-ng & Macchanger (fremantle/maemo 5)
Same here .... My Wifi (Channel 7) is not found.
|
Re: Aircrack-ng & Macchanger (fremantle/maemo 5)
Quote:
I see three packages on my N900 with wl1251 in their names: libwl1251, wl1251-firmware, and wl1251-cal. Do you know which ones are open and where the source is? Are there other packages needed too? |
Re: Aircrack-ng & Macchanger (fremantle/maemo 5)
I get
Neither the sysfs interface links nor the iw command is available. Please download and install iw from http://wireless.kernel.org/download/...0.9.17.tar.bz2 when i try and run airmon-ng start wlan0 wireless-tools latest version is installed but i'm a bit lost at the message above.. anyone shed any light? |
Re: Aircrack-ng & Macchanger (fremantle/maemo 5)
All I have to say to those in this thread is be patient for another week or so and great things are coming for the wl1251 ;)
|
Re: Aircrack-ng & Macchanger (fremantle/maemo 5)
I'm very newbie at N900, how can I install this with terminal? I know I need to write down "sudo apt-get install aircrack-ng" but it somehow doesnt do anything,
anyone can explain one by one? :( which file should get first, http://download.aircrack-ng.org/aircrack-ng-1.0.tar.gz this one or some .deb file I cannot find? |
Re: Aircrack-ng & Macchanger (fremantle/maemo 5)
wow! I can wait a week or so, bot not more ;)
|
Re: Aircrack-ng & Macchanger (fremantle/maemo 5)
Quote:
|
Re: Aircrack-ng & Macchanger (fremantle/maemo 5)
Wow I wait !!! :)
|
Re: Aircrack-ng & Macchanger (fremantle/maemo 5)
Will neopwn be free?
|
Re: Aircrack-ng & Macchanger (fremantle/maemo 5)
yes. and neopwn and backtrack just anounced they are merging and making a backtrack mobile platform to run on the n900. When this will be released or if there first will be a neopwn version it does not say anything about. check out neopwn.com
|
Re: Aircrack-ng & Macchanger (fremantle/maemo 5)
Hey guys.
Will neopwn replace the current Maemo system or will it be run in a virtual machine on top of Maemo ? |
Re: Aircrack-ng & Macchanger (fremantle/maemo 5)
This thread has answers about NeoPwn and BackTrack.
|
Re: Aircrack-ng & Macchanger (fremantle/maemo 5)
Were you guy able to capture data in airodump (irrespective of the channel)?
I wasn't able from both debian chroot and maemo. It's zero everywhere. There are clients connected and active on my network... |
Re: Aircrack-ng & Macchanger (fremantle/maemo 5)
hi
finaly after a few weeks of my on reserch i manage to crack my on wep key with nokia n900 ( the injection is not workins so you have to be pacient). on network with high trafic you will be able to capture data iv ( 90.000) in less then 10 minutes. have a nice day |
Re: Aircrack-ng & Macchanger (fremantle/maemo 5)
hi
to do a handsake with n900 asuming thet you have clients on the network you need injetion? i capture a .cap with one handshake but i got not passfrase in dictionari ( i use password.lst feom aircrack and password.lst from jack the reapper) i do somting wrong or is just becose injection is not working with n900? update wap key cracking is working on nokia n900 ( assuming you have clients conected in network and a BIG dictionary ) |
Re: Aircrack-ng & Macchanger (fremantle/maemo 5)
Does anyone have the .deb files for airpwn? I wan to thes it but I can't find .deb I saw the links in this post for rapidshare but links are broken..
|
Re: Aircrack-ng & Macchanger (fremantle/maemo 5)
Did anyone get a handshake?
|
Re: Aircrack-ng & Macchanger (fremantle/maemo 5)
Quote:
|
All times are GMT. The time now is 21:44. |
vBulletin® Version 3.8.8