maemo.org - Talk - Thread for problems getting USB hostmode working.

maemo.org - Talk (https://talk.maemo.org/index.php)

- Nokia N900 (https://talk.maemo.org/forumdisplay.php?f=44)

- - Thread for problems getting USB hostmode working. (https://talk.maemo.org/showthread.php?t=65570)

Re: Thread for problems getting USB hostmode working.

Guys, sorry i don't have much knowledge about USB HOST MODE, but is it possible that we use N900 as a host-mode as well as charging it? I know that during this mode, BME is stopped. But who know we can still give a command to Battery management to draw power from the USB port to charge the battery. For sure we can create such cable that provide an external power port to power the N900 and attached device.

Re: Thread for problems getting USB hostmode working.

Quote:

Originally Posted by keljuk (Post 877152)

Is there a way to get a generic dual-stick-clone gamepad to work with n900 and the emulators... It seems to recognize it, but it has no function what so ever and none of the light light up :(

you have to remap the joypad event into the keyboard. I have compiled Xjoypad for ubuntu into Maemo. You can download it from 4shared.
http://talk.maemo.org/attachment.php...1&d=1290921841

http://talk.maemo.org/attachment.php...1&d=1290921841

http://www.4shared.com/file/sO2p4sJN...p_xjoypad.html

copy to your /usr/bin and put permission for that file.

Re: Thread for problems getting USB hostmode working.

Quote:

Originally Posted by didik.wahyono (Post 884785)

http://talk.maemo.org/showthread.php...309#post866309

Quote:

Also the much requested hostmode while charging (N900 works as USB host but does not supply VBUS 5V - this will be done by a modified hub or a Y-cable: http://wiki.openmoko.org/wiki/Specia...aka_Y-Cable.29) is not yet supported.

Wait for a version of jrbme integrating management of VBUS (incl. "charging hostmode") as well as hostmode enabling and notifications to user, to come in a few weeks.

[edit] http://talk.maemo.org/showthread.php...203#post921203
/j

Re: Thread for problems getting USB hostmode working.

Has anybody tried to connect webcam?
I have tiny 3 MP webcam. And seems that h-e-n recognize it. And obviously its not showing up in File manager. Wondering if possible to retrieve and get access to it.

Code:

sb 1-1:1.0: uevent

[122824.725524] uvcvideo 1-1:1.0: usb_probe_interface

[122824.725524] uvcvideo 1-1:1.0: usb_probe_interface - got id

[122824.725585] uvcvideo: Found UVC 1.00 device USB 2.0 PC Cam (174f:5271)

[122824.727874] input: USB 2.0 PC Cam as /class/input/input21

[122824.784606] usb 1-1: adding 1-1:1.1 (config #1, interface 1)

[122824.784790] usb 1-1:1.1: uevent

[122824.784881] /home/builder2/maemo-fremantle-armel-extras-devel/work/kernel-power-2.6.28/drivers/usb/core/inode.c: creating file '057'

[122824.785278] usb 1-1: New USB device found, idVendor=174f, idProduct=5271

[122824.785308] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[122824.785308] usb 1-1: Product: USB 2.0 PC Cam

[122824.785339] usb 1-1: Manufacturer: Image Processor

[122824.785369] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002

[122824.785400] hub 1-0:1.0: port 1 enable change, status 00000503

[122860.465850] Forced hostmode error: no device attached

[122860.465942] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002

[122860.465972] hub 1-0:1.0: port 1, status 0101, change 0001, 12 Mb/s

[122860.466003] usb 1-1: USB disconnect, address 57

[122860.466003] usb 1-1: unregistering device

[122860.466033] usb 1-1: usb_disable_device nuking all URBs

[122860.466064] musb_hdrc musb_hdrc: shutdown urb cf3e4780 ep3in-intr

[122860.466064] usb 1-1: unregistering interface 1-1:1.0

[122860.526611] usb 1-1:1.0: uevent

[122860.526672] usb 1-1: unregistering interface 1-1:1.1

[122860.526763] usb 1-1:1.1: uevent

[122860.527191] usb 1-1: uevent

[122860.682464] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101

[122860.807434] usb 1-1: new high speed USB device using musb_hdrc and address 58

[122860.964843] usb 1-1: skipped 1 descriptor after configuration

[122860.964874] usb 1-1: skipped 5 descriptors after interface

[122860.964904] usb 1-1: skipped 1 descriptor after endpoint

[122860.964904] usb 1-1: skipped 13 descriptors after interface

[122860.965087] usb 1-1: default language 0x0409

[122860.965942] usb 1-1: uevent

[122860.966094] usb 1-1: usb_probe_device

[122860.966094] usb 1-1: configuration #1 chosen from 1 choice

[122860.968353] usb 1-1: adding 1-1:1.0 (config #1, interface 0)

[122860.968566] usb 1-1:1.0: uevent

[122860.968719] uvcvideo 1-1:1.0: usb_probe_interface

[122860.968750] uvcvideo 1-1:1.0: usb_probe_interface - got id

[122860.968841] uvcvideo: Found UVC 1.00 device USB 2.0 PC Cam (174f:5271)

[122860.972259] input: USB 2.0 PC Cam as /class/input/input22

[122861.026580] usb 1-1: adding 1-1:1.1 (config #1, interface 1)

[122861.026702] usb 1-1:1.1: uevent

[122861.026763] /home/builder2/maemo-fremantle-armel-extras-devel/work/kernel-power-2.6.28/drivers/usb/core/inode.c: creating file '058'

[122861.027008] usb 1-1: New USB device found, idVendor=174f, idProduct=5271

[122861.027008] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[122861.027038] usb 1-1: Product: USB 2.0 PC Cam

Re: Thread for problems getting USB hostmode working.

Quote:

Originally Posted by ed00 (Post 886675)

Your dmesg clearly shows it's recognized and enumerated as high speed device. To me it looks like it's drawing too much power or sth, and so resets and starts over again enumerating. Anyway there's even a video driver loaded for it.
Obviously it won't show up in file manager, what would you expect to see? A mpeg video file?

If it works and driver works.... I guess you then could access it similarly to internal cams which are /dev/video0 and /dev/video1

cheers
jOERG

Re: Thread for problems getting USB hostmode working.

Quote:

Originally Posted by ed00 (Post 886675)

You can use it with mplayer. Try something like this.

Code:

mplayer tv:// -tv driver=v4l2:device=/dev/video0

Change /dev/video0. To find all the cameras attached (and working), use:

Code:

ls /dev/video*

/dev/video0 is the back camera
/dev/video1 is the front camera
and /dev/video2 should be your USB camera.

Re: Thread for problems getting USB hostmode working.

Quote:

Originally Posted by giannoug (Post 886747)

You can use it with mplayer. Try something like this.

Code:

mplayer tv:// -tv driver=v4l2:device=/dev/video0

Change /dev/video0. To find all the cameras attached (and working), use:

Code:

ls /dev/video*

/dev/video0 is the back camera
/dev/video1 is the front camera
and /dev/video2 should be your USB camera.

I have a Logitech Webcam Pro 9000 Webcam, works on my Ubuntu, the N900 is detected but the commands you indicate only shows green screen.

Re: Thread for problems getting USB hostmode working.

Thanks for respond :)

heres what im getting

Code:

ls /dev/video*

/dev/video0  /dev/video1  /dev/video2

but when i run

Code:

mplayer tv:// -tv driver=v4l2:device=/dev/video2

its giving me

Code:

Playing tv://.

TV file format detected.

No such driver: V412

Re: Thread for problems getting USB hostmode working.

just a suggestion in which direction to think, about mounting etc:
[excerpt from my PC syslog]

Quote:

Dec 2 09:01:10 halley kernel: [6102345.471038] usb 1-1: new high speed USB device using ehci_hcd and address 59
Dec 2 09:01:10 halley kernel: [6102345.587521] usb 1-1: New USB device found, idVendor=1307, idProduct=0165
Dec 2 09:01:10 halley kernel: [6102345.587552] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Dec 2 09:01:10 halley kernel: [6102345.587572] usb 1-1: Product: USB Mass Storage Device
Dec 2 09:01:10 halley kernel: [6102345.587588] usb 1-1: Manufacturer: USB007
Dec 2 09:01:10 halley kernel: [6102345.587602] usb 1-1: SerialNumber: 00000000000619
Dec 2 09:01:10 halley kernel: [6102345.587887] usb 1-1: configuration #1 chosen from 1 choice
Dec 2 09:01:10 halley kernel: [6102345.590306] scsi23 : SCSI emulation for USB Mass Storage devices
Dec 2 09:01:10 halley kernel: [6102345.590623] usb-storage: device found at 59
Dec 2 09:01:10 halley kernel: [6102345.590631] usb-storage: waiting for device to settle before scanning
Dec 2 09:01:11 halley kernel: [6102346.591239] scsi 23:0:0:0: Direct-Access USB007 mini-USB2BU 0.00 PQ: 0 ANSI: 2
Dec 2 09:01:11 halley kernel: [6102346.591722] sd 23:0:0:0: Attached scsi generic sg2 type 0
Dec 2 09:01:11 halley kernel: [6102346.595452] sd 23:0:0:0: [sdb] 1974272 512-byte logical blocks: (1.01 GB/964 MiB)
Dec 2 09:01:11 halley kernel: [6102346.596211] sd 23:0:0:0: [sdb] Write Protect is off
Dec 2 09:01:11 halley kernel: [6102346.596230] sd 23:0:0:0: [sdb] Mode Sense: 00 00 00 00
Dec 2 09:01:11 halley kernel: [6102346.596238] sd 23:0:0:0: [sdb] Assuming drive cache: write through
Dec 2 09:01:11 halley kernel: [6102346.598117] usb-storage: device scan complete
Dec 2 09:01:11 halley kernel: [6102346.599687] sd 23:0:0:0: [sdb] Assuming drive cache: write through
Dec 2 09:01:11 halley kernel: [6102346.599725] sdb: sdb1
Dec 2 09:01:11 halley kernel: [6102346.954787] sd 23:0:0:0: [sdb] Assuming drive cache: write through
Dec 2 09:01:11 halley kernel: [6102346.954808] sd 23:0:0:0: [sdb] Attached SCSI removable disk
Dec 2 09:01:12 halley hald: mounted /dev/sdb1 on behalf of uid 1000
Dec 2 09:01:29 halley kernel: [6102364.537195] usb 1-1: USB disconnect, address 59
Dec 2 09:01:29 halley hald[1356]: forcibly attempting to lazy unmount /dev/sdb1 as enclosing drive was disconnected
Dec 2 09:01:29 halley hald: unmounted /dev/sdb1 from '/media/disk-1' on behalf of uid 0

particularly look at the hald-lines

from my ps:
1490 ? S 29:49 hald-addon-storage: polling /dev/sr0 (every 2 sec)
/j

Re: Thread for problems getting USB hostmode working.

Quote:

Originally Posted by ed00 (Post 887315)

Thanks for respond :)

heres what im getting

Code:

ls /dev/video*

/dev/video0  /dev/video1  /dev/video2

but when i run

Code:

mplayer tv:// -tv driver=v4l2:device=/dev/video2

its giving me

Code:

Playing tv://.

TV file format detected.

No such driver: V412

I've noticed that you didn't type the code correctly... "v4l2" stands for "Video 4 Linux 2" input, so make sure you enter letter "l", not digit "1"

Re: Thread for problems getting USB hostmode working.

@foosball
yes, i found that right after when i posted.

Well im still trying to make webcam work no luck yet ...

USB stick support with h-e-n application

Hello,

I have installed h-e-n application on my N900 & i am able to connect USB mouse successfully with my device through this software.

But when I try to connect my pendrive with the same procedure i followed for mouse, the pen drive is not detected. I searched some videos in which people has successfully connected their pendrives/USB HDDs to the device by doing some kernal settings through Xterminal.

Can Anyone here tell me how I can enable USB disk detection on my N900??

Thanks a lot for your support..

Best Regards,
Hardik

Re: USB stick support with h-e-n application

try fullspeed not highspeed. some cards don't work in HSmode from start.

Re: Thread for problems getting USB hostmode working.

The problem we suffer is to mount USB drives. The script does not work.

Always properly enumerate my devices.

Completely assembled manually.

Re: Thread for problems getting USB hostmode working.

I don`t know if this is been asked before but.....is there a way of connecting a USB game controller to the N900 and use it in games through HEN?

Thanks

Re: Thread for problems getting USB hostmode working.

Hi guys
First of all, thanks a lot for the good work. Wishing you guys all the very best. Anyway, I am getting some problem with host mode to work. My N900 is on the latest FW which is PR 1.3 and I am using the latest kernel which is Titan's kernel V46 with no over clocking. I have installed extmou for my bluetooth mouse (A4Tech BT-630) and it works perfect. Yesterday I installed h-e-n and I made a female to female usb converter by myself. I have a Verbatim 2GB pendrive. I tried to connect it with N900 but no luck. N900 does recognise it but there is no drive in nither File manager nor Filebox. Today I uninstalled extmou and restart devide and reinstalled extmou also restart and tried my bluetooth mouse. Its working fine but no avail with usb laser mouse. I did collect the kernel message which I am providing below.
http://i1128.photobucket.com/albums/...222-153239.png

BTW, I saw somewhere that i2c-tools is needed but when I search for it, I just find i2c_tiny_usb. Is this the same one ? Anyway, I tried with the pendrive with fat, fat32 and ntfs format. I also tried to mount manually but get an error says "no such file or directory". Sometimes I get a yellow banner says "unable to connect". I also checked the media/flash in filebox and got an empty mmc1 folder. Now I am very much confused:confused:. I dont know what to do. I tried almost everything I could but returns with no luck. So it would be my humbble pleasure if anybody can lead me to the solution. Thanks:D

Re: Thread for problems getting USB hostmode working.

obhishap,
You made converter yourself? So have you confirmed on some other device that your handmade plug really works?

Also I have huge trouble on understand what is the issue?
- No cursor
- Usb pendrive not working
These?

You can btw. copy that log and copy paste it here or in pastebin.

Re: Thread for problems getting USB hostmode working.

Thanks slender for quick reply. Yes, I made the converter. I took a male to female usb extension cable and a female usb point from a ps2 to usb converter. Then I did cut the male point from the cable and soldered the female point into there. I think it is working cause, I can see the pendrive and usb mouse getting power and also recognised by N900. The problem is, I am not getting mouse cursor and not getting any pendrive drive in the file manager. Another problem is, after checking anything in h-e-n, I cannot connect N900 to pc if not restarted. I am using N900 as usb modem and everytime I use h-e-n, I need to restart N900 to get connection to the pc. This is the most annoying part. I will paste the log ASAP. Thanks again for the help.

Re: Thread for problems getting USB hostmode working.

[ 4996.560668] usb 1-1: usb_probe_device
[ 4996.560699] usb 1-1: configuration #1 chosen from 1 choice
[ 4996.564453] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
[ 4996.564788] usb 1-1:1.0: uevent
[ 4996.565185] libusual 1-1:1.0: usb_probe_interface
[ 4996.565277] libusual 1-1:1.0: usb_probe_interface - got id
[ 4996.657897] /home/builder2/maemo-fremantle-armel-extras-devel/work/kernel-power-2.6.28/drivers/usb/core/inode.c: creating file '006'
[ 4996.658294] usb 1-1: New USB device found, idVendor=0a16, idProduct=1200
[ 4996.658325] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4996.658355] usb 1-1: Product: Store'n'Go Mini
[ 4996.658355] usb 1-1: Manufacturer: Verbatim
[ 4996.658386] usb 1-1: SerialNumber: 4af2aac589831b
[ 4996.658416] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[ 4996.658477] hub 1-0:1.0: port 1 enable change, status 00000503
[ 4996.729919] Initializing USB Mass Storage driver...
[ 4996.730163] usb-storage 1-1:1.0: usb_probe_interface
[ 4996.730194] usb-storage 1-1:1.0: usb_probe_interface - got id
[ 4996.730712] scsi0 : SCSI emulation for USB Mass Storage devices
[ 4996.738922] usbcore: registered new interface driver usb-storage
[ 4996.738983] USB Mass Storage support registered.
[ 4996.744720] usb-storage: device found at 6
[ 4996.744720] usb-storage: waiting for device to settle before scanning
[ 5001.746032] usb-storage: device scan complete
[ 5001.766723] scsi 0:0:0:0: Direct-Access Verbatim Store'n'Go Mini 1.30 PQ: 0 ANSI: 2
[ 5001.784881] sd 0:0:0:0: [sda] 3948544 512-byte hardware sectors: (2.02 GB/1.88 GiB)
[ 5001.785186] sd 0:0:0:0: [sda] Write Protect is off
[ 5001.785217] sd 0:0:0:0: [sda] Mode Sense: 00 00 00 00
[ 5001.785217] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 5001.789703] sd 0:0:0:0: [sda] 3948544 512-byte hardware sectors: (2.02 GB/1.88 GiB)
[ 5001.789978] sd 0:0:0:0: [sda] Write Protect is off
[ 5001.790008] sd 0:0:0:0: [sda] Mode Sense: 00 00 00 00
[ 5001.790039] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 5001.790039] sda:
[ 5002.109436] sd 0:0:0:0: [sda] Attached SCSI removable disk

But though I am not getting it working.

Re: Thread for problems getting USB hostmode working.

Hi Obhishap,
what does ls /dev/sd* outputs?

Re: Thread for problems getting USB hostmode working.

Quote:

Originally Posted by jurop88 (Post 904626)

Hi Obhishap,
what does ls /dev/sd* outputs?

Sorry I am not getting it. Did you mean the list in /dev ??? if yes, then there is no sd or sda1 exist in dev directory. Looking ahead to your reply. Thanks.

BTW, I saw a broken symlink in the dev directory which is named "core".

Re: Thread for problems getting USB hostmode working.

I am not a kernel developer but the broken symlink shouldn't matter.
It sounds strange you don't have any /dev/sda kind of file, the log says clearly the kernel is going to file your verbatim under /dev/sda...
Just to be sure, did you check the existance of /dev/sda AFTER having enumerated your verbatim usb stick? The device is created on the fly by the kernel, it is not a dir you have to create

Re: Thread for problems getting USB hostmode working.

Got it working man thanks a lot. I checked for sda instead of sda1 and I got it right a way....Now I am so happy. Thanks jurop88 and all of you who helped me.

Re: Thread for problems getting USB hostmode working.

Hi everybody,

something strange is happening here:
A while ago I asked about a problem that happened when moving files bigger than 200mb (and promptly answered by joerg that is a maemo bug).

And I had another problem of time while working with h-e-n: sometime after started, it said in dmesg something like usb1:suspend, and then the link was lost. I use to use the hub (cp-h420mp) - the only one I have that works, all my other [cheap] self powered hubs just won't - because direct link between mouse-n900 just doesn't work.

And the problem with self suspend was true UNTIL I plugged together another gadget called Gemei x760+, that I planed to use as a SD reader (and that have another memory with 4GB that isn't auto mounted but is easy to mount - it is recognized).

And the problem with the files of more than 200mb was solved too!! Now I can move and copy anything without problems and having to run fdisk to fix things.

Is there any explanation for that?

Thanks.

Re: Thread for problems getting USB hostmode working.

my problem:

Trying to find that darn USB female-female converter....

Darn shops ain't got nothin in em

Re: Thread for problems getting USB hostmode working.

Hello, i'm getting this error when running male to female cable with USB Visipro 8GB

Quote:

[31587.611602] hub 1-0:1.0: port 1 not reset yet, waiting 50ms
[31587.674224] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31587.885101] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31588.096008] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31588.096069] hub 1-0:1.0: port_wait_reset: err = -16
[31588.096099] hub 1-0:1.0: port 1 not enabled, trying reset again...
[31588.306884] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31588.517913] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31588.728942] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31588.728973] hub 1-0:1.0: port_wait_reset: err = -16
[31588.729003] hub 1-0:1.0: port 1 not enabled, trying reset again...
[31588.939849] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31589.150878] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31589.361724] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31589.361755] hub 1-0:1.0: port_wait_reset: err = -16
[31589.361785] hub 1-0:1.0: port 1 not enabled, trying reset again...
[31589.572662] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31589.783599] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31589.994476] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31589.994537] hub 1-0:1.0: port_wait_reset: err = -16
[31589.994567] hub 1-0:1.0: port 1 not enabled, trying reset again...
[31590.205474] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31590.416473] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31590.627441] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31590.627471] hub 1-0:1.0: port_wait_reset: err = -16
[31590.627502] hub 1-0:1.0: port 1 not enabled, trying reset again...
[31590.627532] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[31590.627624] hub 1-0:1.0: logical disconnect on port 1
[31590.627716] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000
[31590.627777] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[31590.627807] usb 1-1: USB disconnect, address 24
[31590.627899] usb 1-1: unregistering device
[31590.627929] usb 1-1: usb_disable_device nuking all URBs
[31590.627960] usb 1-1: unregistering interface 1-1:1.0
[31590.663116] scsi 4:0:0:0: rejecting I/O to dead device
[31590.663269] scsi 4:0:0:0: rejecting I/O to dead device
[31590.663391] scsi 4:0:0:0: rejecting I/O to dead device
[31590.663482] scsi 4:0:0:0: rejecting I/O to dead device
[31590.663513] scsi 4:0:0:0: [sda] READ CAPACITY failed
[31590.663543] scsi 4:0:0:0: [sda] Result: hostbyte=0x01 driverbyte=0x00
[31590.663604] scsi 4:0:0:0: [sda] Sense not available.
[31590.663665] scsi 4:0:0:0: rejecting I/O to dead device
[31590.663757] scsi 4:0:0:0: [sda] Write Protect is off
[31590.663787] scsi 4:0:0:0: [sda] Mode Sense: 00 00 00 00
[31590.663818] scsi 4:0:0:0: [sda] Assuming drive cache: write through
[31590.663909] scsi 4:0:0:0: rejecting I/O to dead device
[31590.664001] scsi 4:0:0:0: rejecting I/O to dead device
[31590.664093] scsi 4:0:0:0: rejecting I/O to dead device
[31590.664184] scsi 4:0:0:0: rejecting I/O to dead device
[31590.664245] scsi 4:0:0:0: [sda] READ CAPACITY failed
[31590.664276] scsi 4:0:0:0: [sda] Result: hostbyte=0x01 driverbyte=0x00
[31590.664306] scsi 4:0:0:0: [sda] Sense not available.
[31590.664367] scsi 4:0:0:0: rejecting I/O to dead device
[31590.664428] scsi 4:0:0:0: [sda] Write Protect is off
[31590.664459] scsi 4:0:0:0: [sda] Mode Sense: 00 00 00 00
[31590.664489] scsi 4:0:0:0: [sda] Assuming drive cache: write through
[31590.667572] usb 1-1:1.0: uevent
[31590.668914] usb 1-1: uevent
[31590.729156] hub 1-0:1.0: port 1 not reset yet, waiting 50ms
[31590.791351] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31591.002227] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31591.214202] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31591.214233] hub 1-0:1.0: port_wait_reset: err = -16
[31591.214263] hub 1-0:1.0: port 1 not enabled, trying reset again...
[31591.424163] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31591.635040] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31591.846008] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31591.846038] hub 1-0:1.0: port_wait_reset: err = -16
[31591.846038] hub 1-0:1.0: port 1 not enabled, trying reset again...
[31592.056945] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31592.268066] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31592.478973] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31592.479003] hub 1-0:1.0: port_wait_reset: err = -16
[31592.479034] hub 1-0:1.0: port 1 not enabled, trying reset again...
[31592.689849] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31592.900787] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31593.111724] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31593.111755] hub 1-0:1.0: port_wait_reset: err = -16
[31593.111785] hub 1-0:1.0: port 1 not enabled, trying reset again...
[31593.322662] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31593.533599] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31593.744598] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31593.744628] hub 1-0:1.0: port_wait_reset: err = -16
[31593.744659] hub 1-0:1.0: port 1 not enabled, trying reset again...
[31593.744689] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[31593.806915] hub 1-0:1.0: port 1 not reset yet, waiting 50ms
[31593.869384] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31594.080474] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31594.291412] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31594.291442] hub 1-0:1.0: port_wait_reset: err = -16
[31594.291473] hub 1-0:1.0: port 1 not enabled, trying reset again...
[31594.502349] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31594.713287] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31594.924285] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31594.924316] hub 1-0:1.0: port_wait_reset: err = -16
[31594.924346] hub 1-0:1.0: port 1 not enabled, trying reset again...
[31595.135162] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31595.346130] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31595.556945] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31595.557006] hub 1-0:1.0: port_wait_reset: err = -16
[31595.557037] hub 1-0:1.0: port 1 not enabled, trying reset again...
[31595.768005] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31595.978912] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31596.189910] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31596.189941] hub 1-0:1.0: port_wait_reset: err = -16
[31596.189971] hub 1-0:1.0: port 1 not enabled, trying reset again...
[31596.400848] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31596.611724] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31596.822540] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31596.822570] hub 1-0:1.0: port_wait_reset: err = -16
[31596.822601] hub 1-0:1.0: port 1 not enabled, trying reset again...
[31596.822631] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[31596.885192] hub 1-0:1.0: port 1 not reset yet, waiting 50ms
[31596.947784] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31597.158599] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31597.369415] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31597.369445] hub 1-0:1.0: port_wait_reset: err = -16
[31597.369476] hub 1-0:1.0: port 1 not enabled, trying reset again...
[31597.580474] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31597.791412] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31598.002410] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31598.002441] hub 1-0:1.0: port_wait_reset: err = -16
[31598.002471] hub 1-0:1.0: port 1 not enabled, trying reset again...
[31598.213348] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31598.424346] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31598.635162] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31598.635192] hub 1-0:1.0: port_wait_reset: err = -16
[31598.635223] hub 1-0:1.0: port 1 not enabled, trying reset again...
[31598.846069] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31599.056945] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31599.268157] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31599.268188] hub 1-0:1.0: port_wait_reset: err = -16
[31599.268218] hub 1-0:1.0: port 1 not enabled, trying reset again...
[31599.479095] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31599.689849] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31599.900787] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31599.900817] hub 1-0:1.0: port_wait_reset: err = -16
[31599.900848] hub 1-0:1.0: port 1 not enabled, trying reset again...
[31599.900878] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[31599.963287] hub 1-0:1.0: port 1 not reset yet, waiting 50ms
[31600.025878] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31600.236724] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31600.447662] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31600.447692] hub 1-0:1.0: port_wait_reset: err = -16
[31600.447723] hub 1-0:1.0: port 1 not enabled, trying reset again...
[31600.658660] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31600.869537] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31601.080352] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31601.080383] hub 1-0:1.0: port_wait_reset: err = -16
[31601.080413] hub 1-0:1.0: port 1 not enabled, trying reset again...
[31601.291412] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31601.502349] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31601.713287] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31601.713317] hub 1-0:1.0: port_wait_reset: err = -16
[31601.713348] hub 1-0:1.0: port 1 not enabled, trying reset again...
[31601.924224] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31602.135162] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31602.346099] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31602.346130] hub 1-0:1.0: port_wait_reset: err = -16
[31602.346160] hub 1-0:1.0: port 1 not enabled, trying reset again...
[31602.557037] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31602.768096] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31602.978912] hub 1-0:1.0: port 1 not reset yet, waiting 200ms
[31602.978942] hub 1-0:1.0: port_wait_reset: err = -16
[31602.978973] hub 1-0:1.0: port 1 not enabled, trying reset again...
[31602.979003] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[31602.979095] hub 1-0:1.0: unable to enumerate USB device on port 1
[31604.978973] hub 1-0:1.0: hub_suspend
[31604.979034] usb usb1: bus auto-suspend
[31844.648956] usb usb1: usb resume
[31844.666229] hub 1-0:1.0: hub_resume
[31844.666290] hub 1-0:1.0: port 1: status 0101 change 0001
[31844.775817] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000
[31844.775909] hub 1-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
[31844.900878] usb 1-1: new high speed USB device using musb_hdrc and address 29
[31845.025787] usb 1-1: device descriptor read/64, error -19
[31845.260162] usb 1-1: device descriptor read/64, error -19
[31845.494537] usb 1-1: new high speed USB device using musb_hdrc and address 30
[31845.619689] usb 1-1: device descriptor read/64, error -19
[31845.854003] usb 1-1: device descriptor read/64, error -19
[31846.088378] usb 1-1: new high speed USB device using musb_hdrc and address 31
[31846.510131] usb 1-1: device not accepting address 31, error -19
[31846.635253] usb 1-1: new high speed USB device using musb_hdrc and address 32
[31847.057006] usb 1-1: device not accepting address 32, error -19
[31847.057098] hub 1-0:1.0: unable to enumerate USB device on port 1
[31847.057159] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[31847.057220] hub 1-0:1.0: port 1 enable change, status 00000501
[31849.767883] hub 1-0:1.0: hub_suspend
[31849.767944] usb usb1: bus auto-suspend
[31934.570831] usb usb1: usb resume
[31934.588623] hub 1-0:1.0: hub_resume
[31934.588775] hub 1-0:1.0: port 1: status 0101 change 0001
[31934.697723] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000
[31934.697814] hub 1-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
[31934.822570] usb 1-1: new high speed USB device using musb_hdrc and address 33
[31934.973297] usb 1-1: default language 0x0409
[31934.975708] usb 1-1: uevent
[31934.975921] usb 1-1: usb_probe_device
[31934.975952] usb 1-1: configuration #1 chosen from 1 choice
[31934.979858] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
[31934.980194] usb 1-1:1.0: uevent
[31934.980468] libusual 1-1:1.0: usb_probe_interface
[31934.980529] libusual 1-1:1.0: usb_probe_interface - got id
[31934.980712] usb-storage 1-1:1.0: usb_probe_interface
[31934.980773] usb-storage 1-1:1.0: usb_probe_interface - got id
[31935.075317] scsi5 : SCSI emulation for USB Mass Storage devices
[31935.101623]
/home/builder2/maemo-fremantle-armel-extras-devel/work/kernel-power-2.6.28/drivers/usb/core/inode.c:
creating file '033'
[31935.102325] usb 1-1: New USB device found, idVendor=0951, idProduct=1624
[31935.102386] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[31935.102416] usb 1-1: Product: DataTraveler G2
[31935.102447] usb 1-1: Manufacturer: Kingston
[31935.102478] usb 1-1: SerialNumber: 001372982918A961A62D0044
[31935.102508] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[31935.102600] hub 1-0:1.0: port 1 enable change, status 00000503
[31935.109130] usb-storage: device found at 33
[31935.109161] usb-storage: waiting for device to settle before scanning
[31940.105743] usb-storage: device scan complete
[31940.166442] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[31940.228912] usb 1-1: reset high speed USB device using musb_hdrc and address 33
[31940.291534] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[31940.439910] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[31940.502349] usb 1-1: reset high speed USB device using musb_hdrc and address 33
[31940.564788] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[31940.713378] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[31940.776245] usb 1-1: reset high speed USB device using musb_hdrc and address 33
[31940.838348] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[31940.986846] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[31941.049133] usb 1-1: reset high speed USB device using musb_hdrc and address 33
[31941.111755] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002</p>

Could anyone help me?
Any known solution for this?

Re: Thread for problems getting USB hostmode working.

Hey Dark_Angel.

I do not know , where You are from, but check this out:
http://cgi.ebay.de/USB-2-0-Adapter-A...item4aa75879a0
or
http://cgi.ebay.de/USB-2-0-Adapter-B...583254572#shId

Both send to Germany for free. And both have good reputation (from me ;)).

@all
Wouldn't it be much more convenient for all to put the outputs of dmesg or similar into a small txt file and attach it with the post? Instead of "spamming" the thread with such long listings, making it hard to read?

Re: Thread for problems getting USB hostmode working.

Quote:

Originally Posted by WhiteWolf (Post 894174)

The problem we suffer is to mount USB drives. The script does not work.

Always properly enumerate my devices.

Completely assembled manually.

please read post #604 in hostmode thread. the problem is solved

Re: Thread for problems getting USB hostmode working.

Hi Deny_winarto,
this looks like your cable isn't good for highspeed. Try a better cable, or try connecting with fullspeed.

cheers
jOERG

Re: Thread for problems getting USB hostmode working.

@peterleinchen : sorry I'll do that next time

@joerg_rw ; thanks, so what cable/adapter combination would you recommend? I bought that cable because someone on the other thread managed to get it working on a HDD.

http://talk.maemo.org/showpost.php?p...&postcount=553

and what actually determines the success rate of hostmode? is it the quality of male pinout or the female pinout?

Re: Thread for problems getting USB hostmode working.

Quote:

my problem:

Trying to find that darn USB female-female converter....

Darn shops ain't got nothin in em

Hi all, I just brought 2 Usb cable (male - female) and cut the 2 female usb and connected themselves, following the colors of the cables. finally i made my female - female usb adaptator and it works pretty well!!! no need to buy an adaptator!

Re: Thread for problems getting USB hostmode working.

In case you have one of these around, its pretty much the fastest way to improvise...

http://img137.imageshack.us/img137/572/20101209001.jpg

TRX.

Re: Thread for problems getting USB hostmode working.

hi sami power

most emulators do not support joypad. they are supporting keyboard. this is how xjoypad works. it reads your joypad and send the pressed key to keyboard, so the emulator will thinks that the keyboard is being pressed.

it means, after you are succesfully enumerate your joypad and the joypad is listed in dev/input, you are able to control all applications that supports keyboard. this inlcuding your xterminal.

maybe the problem was, your joypad is not listed as js0. try to findout what is the codename of your joypad. since i have only one joypad, i am unable to find another codename, thats why i assign js0 as default in xjoypad.

try to reboot your N900,
cd /dev/input then type ls
enumerate your joypad,
then do cd /dev/input then type ls again.
any new item will be your joypad.

regard

Re: Thread for problems getting USB hostmode working.

gamepad codename ?? what numbers/letters in hen , is it?? , can you see my captures,

now i wil try it:

try to reboot your N900,
cd /dev/input then type ls
enumerate your joypad,
then do cd /dev/input then type ls again.
any new item will be your joypad.

edit:

you're very lucky , only 1 gamepad and it are running perfect

but you has been played only a psx and others emulators?

try mame, and others please and tell me . thanks

for example user IMPEHAM say it:

it is working - i was playing with such a joystick - connected my n900 to the TV and played mame games, playstation games with the emulator, and mupen 64 - amazing - the N900 has now become a full game console...

i used mgtech joystick: http://img.zap.co.il/pics/5/6/1/1/21601165b.gif

this gamepad are very compatible with all emulators

i tried 4 gamepads and only 1 ran and only with mame, very rare.

and without xjoypad, with xjoypad identical results.

i tried

enumerate joypad,
then do cd /dev/input then type ls again.
and not new item

i think that it depend compatibility drivers but

my big dude:

play 3 station gamepad original bluettoth have sixaxis driver installed and run very well

why are not running in usb mode? , if n900 have library ??

Re: Thread for problems getting USB hostmode working.

Quote:

Originally Posted by samipower (Post 912765)

greeting,

yes, i have tried it at three different emulator. its PSX4all, drNokSNES, iNES, Master gear, and it works fine. i just need to set up the emulators to read specific key in the joypad.

can you please tell me what was listed in /dev/input after you enumerate ur joypad? what i mean by "codename" is letter and numbers in /dev/input. for example js0.

regard

Re: Thread for problems getting USB hostmode working.

my steps exactly:

i started nokia n900
open xterminal and in dev/input are this files

event0 event1 event2 event3 keypad ts pwrbutton uinput

now i started hen
full speed vboost
connect usb gamepad ps3 original and enumerate , two times enumerate process
hen log: show name and compant gamepad and usb hid core driver 2.6

in dev/input/ i write ls

and nothing not new file created

but if i put on bluetooth and conect ps3 gamepad bluetoth mode

yes in dev/input magic js0 now

usb mode not js0
bluetoth mode yes js0

same gamepad ps3 original used

i used filebox and compress js0 file into zip file with bluetoth active

and after i tried with js0 file copy/paste in dev/input and try put usb ps3 original gamepad and hen enumerate and xjoypad

and yes xjoypad run ok now , but gamepad not run .

Re: Thread for problems getting USB hostmode working.

Quote:

Originally Posted by MohammadAG (Post 872584)

Before you mount, however you might need extra packages (that may/may not be available in maemo) for write support.

hello
very please help I want to connect a dvd rom as I have to do it
so to play dvd and if it is possible to have a record
Thank you for hen and greet

I apologize for the language

Re: Thread for problems getting USB hostmode working.

hi all, what im doing wrong? when i switch on h-e-n and i do all what i saw in all forums and youtube videos but i still cant get working any discs. i have nokia card reader and usb sandisk 4GB. mouse working properly, keyboard as well. what i have to do?thx

Re: Thread for problems getting USB hostmode working.

Hello,
I've got a little problem:
i plug my usb key, it's enumerate, i can see it in dmesg.
The mount button doesn't work at all.
I can mount it by in root: mount /dev/sda /media/flash -o uid=29999,gid=29999,utf8,dmask=027,fmask=137
and its appear in /media/flash that i created.
Is there a way that the mount button work?
Thx

Re: Thread for problems getting USB hostmode working.

hi,

I have tried to connect a usb DVD drive and got the following in the logs:

[39971.219238] /home/builder2/maemo-fremantle-armel-extras-devel/work/kernel-power-2.6.28/drivers/usb/core/inode.c: creating file '022'
[39971.219604] usb 1-1: New USB device found, idVendor=03f0, idProduct=5e07
[39971.219635] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[39971.219665] usb 1-1: Product: HP USB Mass Storage Device
[39971.219665] usb 1-1: Manufacturer: Hewlett-Packard
[39971.219696] usb 1-1: SerialNumber: 2104752485555557234
[39971.219726] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[39971.219757] hub 1-0:1.0: port 1 enable change, status 00000503
[39971.375396] Initializing USB Mass Storage driver...
[39971.375640] usb-storage 1-1:1.0: usb_probe_interface
[39971.375671] usb-storage 1-1:1.0: usb_probe_interface - got id
[39971.377471] scsi0 : SCSI emulation for USB Mass Storage devices
[39971.378784] usbcore: registered new interface driver usb-storage
[39971.378814] USB Mass Storage support registered.
[39971.381378] usb-storage: device found at 22
[39971.381378] usb-storage: waiting for device to settle before scanning
[39976.381317] usb-storage: device scan complete
[39976.394439] scsi 0:0:0:0: CD-ROM HP DVD-ROM rm475e JH21 PQ: 0 ANSI: 0

My guess is that h.e.n. is working, Is it? Further question is that how do I mount this one?(note: I have also posted http://talk.maemo.org/showthread.php...103#post927103) for help on this.)

Cheers,