Re: [Announce] Wifi Jamming Script - THE PURGE - with a simple GUI
 

just if you have KP v.50 !!!
please follow this instructions:

• remove all old files (go to MyDocs and delete ThePurge folder and/or delete all purge.sh script)
• download the attached zip (ThePurge v0.5 for KP50.zip)
• unzip the "ThePurge" folder in MyDocs (you must have this path: /home/user/MyDocs/ThePurge)
• in xterm (or FAP) >install< or >remove and reinstall< all dependencies (aircrack-ng, mdk3, zenity, macchanger)
• install the right injection driver; http://david.gnedt.eu/wl1251/wl1251-...-source.tar.gz (484MB)
• reboot
• open xterm and type "sudo gainroot" , then type "sh /MyDocs/ThePurge/purge0.5.sh" (note: whitout " ")

Re: [Announce] Wifi Jamming Script - THE PURGE - with a simple GUI
 

i downloaded the 484mb file. couldnot untar it in MyDocs so i copied it to home/user directory and untared it. after that i got a folder naming: wl1251-maemo. inside that folder there are 3tar file
1)compat-wireless-2.6.tar.bz2
2)compat.tar.bz2
3)wireless-testing.tar.bz2

and 1 sh file : build-wl.sh

i cannot untar the 3file. i get error::



BusyBox v1.19.3 (Debian 1.19.3power5) built-in shell (ash)
Enter 'help' for a list of built-in commands.

~ $ root


BusyBox v1.19.3 (Debian 1.19.3power5) built-in shell (ash)
Enter 'help' for a list of built-in commands.

Nokia-N900:~# cd /home/user/wl1251-maemo/
Nokia-N900:/home/user/wl1251-maemo# tar -xzvf compat-wireless-2.6.tar.bz2
gzip: invalid magic
tar: Child returned status 1
tar: Exiting with failure status due to previous errors
Nokia-N900:/home/user/wl1251-maemo#

where am i going wrong AGAIN :@

Re: [Announce] Wifi Jamming Script - THE PURGE - with a simple GUI
 

Hi again Red_Fox.
If i have the Purge working should i reinstall the dependencies ?

Your script is excellent keep up the good work :D :D :D :D

Re: [Announce] Wifi Jamming Script - THE PURGE - with a simple GUI
 

thanks :D

if all the attacks work, you don't need to reinstall the dependencies (the problem is just with mdk3 .. as you said ;))

Re: [Announce] Wifi Jamming Script - THE PURGE - with a simple GUI
 

plz help me with my problems. red fox. plzzz

Re: [Announce] Wifi Jamming Script - THE PURGE - with a simple GUI
 

mine is always saying /home/user/MyDocs/ThePurge/purgetmp/aptemp - file not found when trying to load the scanned list.


Also when doing a beacon flood the SSID is always "-g".

using 0.5 on kp50

Re: [Announce] Wifi Jamming Script - THE PURGE - with a simple GUI
 

sorry guys
I have not explained very well how and what to copy to run this script.

I updated the instructions, see the first page.

Re: [Announce] Wifi Jamming Script - THE PURGE - with a simple GUI
 

mine is located in home/user/MyDocs/ThePurge

after scanning for ap list and trying to load the list i get /home/user/MyDocs/ThePurge/ApList cannot be found...

Re: [Announce] Wifi Jamming Script - THE PURGE - with a simple GUI
 

after scan
A dialog box appears and asking you if you want to save the data ...have zenity installed?? You saved some AP??

Re: [Announce] Wifi Jamming Script - THE PURGE - with a simple GUI
 

my bad, was missing zenity....


got it working.. noticed a bug, beacon flood fails when SSID has a space in it.

Re: [Announce] Wifi Jamming Script - THE PURGE - with a simple GUI
 

I know that bug and fix it in next version

thanks for testing

Re: [Announce] Wifi Jamming Script - THE PURGE - with a simple GUI
 

no prob. thanks for making the script.

request - can you make an alternative beacon flood that generates random SSIDs as well instead of cloning a target.

Re: [Announce] Wifi Jamming Script - THE PURGE - with a simple GUI
 

WOW this script just gets better and better!!

i can see this script going places as one of the ultimate n900 security must haves! keep up the good work.

Re: [Announce] Wifi Jamming Script - THE PURGE - with a simple GUI
 

Yes this would be excellent!

Re: [Announce] Wifi Jamming Script - THE PURGE - with a simple GUI
 

Hi everybody...
hope this could help... Firstly, this script is amazing in its simplicity... Thanks Red_Fox !!! I was having a problem with the "code" since ThePurge always return me a "sleep: invalid number "1s" everytime i tried an attack. Despite the first option to load drivers and set mac doesn't work, almost everything else works fine... I still could search and save APs and Clients but when i was trying perform an attack, everything that i got was a "sleep" error :(
I'm just a noob but figured out if the "s" couldn't be the problem (I use only the stock busybox). Then, tested "sleep 1s" on x-term e got the same error. So, i just remove each "s" of each sleep command of the code e now everything is fine :D. Works like charm !!! That's it.
Forgive me about the terrible english...

Edit: had to reboot to stop some unidentified process that was eating my battery and fake hostname still there... Searching for solution... :cool:
Edit2: as fas as i understood the scrip, it don't restore the original hostname. So i change it manuallly...
And the process that was draining battery was using wl12xx and i couldn't killed it even with kill -9 or anything. Only reboot brings device back to normal state. I was searching and findout an ancient bug with wl12xx that makes a full battery empty in 6 hours without big cpu activity. http://test.maemo.org/testzilla/show_bug.cgi?id=6615
Seens like it stays permanently searching an wifi AP. But, like i sad before, i'm just a noob and don't have the skills to analise more deeply. If i could help with a log or anything is just to ask.
Thanks a lot guys.

Re: [Announce] Wifi Jamming Script - THE PURGE - with a simple GUI
 

I always get this , it loads drivers sucesfully .

Re: [Announce] Wifi Jamming Script - THE PURGE - with a simple GUI
 

Can this be ported or used on N9 ?

Re: [Announce] Wifi Jamming Script - THE PURGE - with a simple GUI
 

nope.

__________

Re: [Announce] Wifi Jamming Script - THE PURGE - with a simple GUI
 

have you installed the following :

mdk3
zenity
injection driver
aircrack-ng (aireplay-ng)
macchanger

if so, i recommend reinstalling mdk3 and zenity

Re: [Announce] Wifi Jamming Script - THE PURGE - with a simple GUI
 

I had them all installed but I reinstalled mdk3 and zenity and all works like a charm now . I tested it on my wifi , it really works , I was connected with n9 and it could not load any page while flooding with n900 . :D

One question ? Is it possible to make something to just disconnect all clients of a wifi network ?

Re: [Announce] Wifi Jamming Script - THE PURGE - with a simple GUI
 

Well from my testing , it depends on router and the wireless card being attacked, let me explain:

On my old netgear router combined with my built in Intel(R) PRO/Wireless 3945ABG card, i choose option 5 from wifi purge and i quickly get knocked off plus my router is unable to get onto the internet.

on a new netgear router (virgin superhubs and 1 year old dlink router (same wireless card) ,i stay connected but the router stays disconnected from the internet.

so to sum up , i think a combination of age of hardware & firmware that is being attacked plays a big part .

what i really want to test this out on is draytek wireless routers and Cisco APS, as they have a more industrial approach then a domestic router .....

its all about testing........