Originally Posted by gaggar (Post 1217399)

Yesterday my N9 started acting wierd...
suddently it:
lost all signal
camera coudn't launch
restarted by itself.

Once it had sartet up it wrote something like "there is something wrong with your sim-card" /
at other times is says "an error has occured cannot connect to network - Contact Nokia store"

I tried using my simcard in another phone - and it workes fine - so it's not the simcard causing this, i think.

Then i figured that it could be a software problem, så first i tried to:

Restore Settings, do the following:

Open “Settings”
Tap “Reset”
Choose “Restore Settings”
Tap “Yes” to confirm the process.

Still got the message "there is something wrong with your sim-card".

then i tried:

To Clear Device, do the following:

Open “Settings”
Tap “Reset”
Choose “Clear Device”
Tap “Yes” to confirm the process.

still got the same message once starting up.

Finally i tried to flash it following the steps in this guide...i used the """""""Flasher -f -F rootfs.bin -F emmc.bin -R"""""""" thing..

The result was this:




Microsoft Windows XP [version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Programmer\Nokia\Flasher>Flasher -f -F pr1.2.bin -F emmc.bin -R
flasher 3.12.1 (Oct 6 2011) Harmattan
WARNING: This tool is intended for professional use only. Using it may result
in permanently damaging your device or losing the warranty.

Suitable USB interface (bootloader/phonet) not found, waiting...
Found device RM-696, hardware revision 1501
NOLO version 2.3.6
Version of 'sw-release': DFL61_HARMATTAN_30.2012.07-1_PR_001
Sending ape-algo image (7096 kB)...
100% (7096 of 7096 kB, avg. 16238 kB/s)
Suitable USB interface (phonet) not found, waiting...
Ping attempt 1 (250 ms)
Server application: 1.7.2
Found product RM-696 rev. 1501
Server implements softupd protocol version 1.8
Image SW version DFL61_HARMATTAN_30.2012.07-1_PR_001
Image moslo not present
Image tar skipped
Image config skipped

Battery level 20 %, continuing.

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[_] cmt-algo [init 100 % 789 / 789 kB NA ]
[ ] cmt-mcusw [pending 0 % 0 / 0 kB NA ]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[x] kernel [finished 100 % 2714 / 2714 kB 2401 kB/s]
[_] rootfs [writing 3 % 39936 / 1163796 kB 8053 kB/s]
[ ] mmc [pending 0 % 0 / 0 kB NA ]
ERROR: SU_GET_UPDATE_STATUS_REQ terminated with error code 1: Unknown error

image [state progress transfer flash speed]
---------------------------------------------------------------------
[x] cert-sw [finished 100 % 1 / 1 kB NA ]
[x] cmt-2nd [finished 100 % 95 / 95 kB NA ]
[f] cmt-algo [init 0 % 789 / 789 kB NA ]
[-] cmt-mcusw [pending 0 % 0 / 0 kB NA ]
[x] xloader [finished 100 % 23 / 23 kB NA ]
[x] secondary [finished 100 % 94 / 94 kB NA ]
[x] kernel [finished 100 % 2714 / 2714 kB 2401 kB/s]
[x] rootfs [finished 100 % 1163796 / 1163796 kB 9780 kB/s]
[x] mmc [finished 100 % 1627169 / 1627169 kB 9369 kB/s]
Fetching error list:
========================================
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
bb5_rdc_cert_read failed
Timeout while waiting for the HWBREAK
Could not reboot into cold bootmode
[Pipe 6] Finishing in error state with status 1
========================================

ERROR: Failed to flash images

C:\Programmer\Nokia\Flasher>


My phone is a black 64GB bought in denmark - product code 059J187

PLEASE HELP.....it's driving CRAZY!!!!

Originally Posted by thedead1440 (Post 1271602)

Stick to ROW Firmware...Its honestly the better option...