maemo.org - Talk
Page 33 of 62 « First 233132 33 343543 Last »
Show 40 post(s) from this thread on one page

maemo.org - Talk (https://talk.maemo.org/index.php)
-   OS2008 / Maemo 4 / Chinook - Diablo (https://talk.maemo.org/forumdisplay.php?f=29)
-   -   ANNOUNCE: Diablo-Turbo first beta available (https://talk.maemo.org/showthread.php?t=69740)

Jimcz 2011-03-29 15:07
Re: ANNOUNCE: Diablo-Turbo first beta available
 
I'm running from flash. I don't quite understand how to convert my filesystem to ext3. Can you direct me to a walk through?

maacruz 2011-03-29 15:54
Re: ANNOUNCE: Diablo-Turbo first beta available
 
Quote:
Originally Posted by Jimcz (Post 977834)
I'm running from flash. I don't quite understand how to convert my filesystem to ext3. Can you direct me to a walk through?
Don't worry about that then, that's only for systems running from mmc.

Jimcz 2011-03-29 17:06
Re: ANNOUNCE: Diablo-Turbo first beta available
 
What if I am running from mmc? I always think flash media = flash.

maacruz 2011-03-29 19:29
Re: ANNOUNCE: Diablo-Turbo first beta available
 
Quote:
Originally Posted by Jimcz (Post 977899)
What if I am running from mmc? I always think flash media = flash.
mmc (sd/minisd) has a controller chip->it abstracts the underlying flash and emulates a disk->you can use any filesystem (fat, ntfs, ext3, whatever)
flash->barebones flash->you have to use a special filesystem (jffs2 here)
Very different

auouymous 2011-03-29 23:05
Re: ANNOUNCE: Diablo-Turbo first beta available
 
Quote:
Originally Posted by Jimcz (Post 977834)
I'm running from flash. I don't quite understand how to convert my filesystem to ext3. Can you direct me to a walk through?
Boot to the real flash (not mmc) and run these as root, just change the device to match your ext2 partition.
Code:
fsck -p -f /dev/mmcblk0p2
tune2fs -j /dev/mmcblk0p2
Then edit /mnt/initfs/bootmenu.conf so it boots as ext3 and reboot.

jwernerny 2011-03-30 02:51
Re: ANNOUNCE: Diablo-Turbo first beta available
 
bluez-utils_3.28-0osso7 breaks the depedency of bluez-utils-test (bluez-utils_3.28-0osso6), which in turn breaks minigpsd. That leaves one of my favorite mapping programs, Maemo Mapper, without a gps to use.

Could someone rebuild bluez-utils-test for the new bluez-utils?

TIA,
- John

momcilo 2011-03-30 07:08
Re: ANNOUNCE: Diablo-Turbo first beta available
 
Hi I would like to test this update, but the whole topic is to big to be read and understood without confusion.

Can somebody write an overview on what is the current status in term of stability and what follows?

For instance the list of present issues?

maacruz 2011-03-30 08:27
Re: ANNOUNCE: Diablo-Turbo first beta available
 
Quote:
Originally Posted by jwernerny (Post 978158)
bluez-utils_3.28-0osso7 breaks the depedency of bluez-utils-test (bluez-utils_3.28-0osso6), which in turn breaks minigpsd. That leaves one of my favorite mapping programs, Maemo Mapper, without a gps to use.

Could someone rebuild bluez-utils-test for the new bluez-utils?

TIA,
- John
Already uploaded to the garage page.

jwernerny 2011-03-30 10:09
Re: ANNOUNCE: Diablo-Turbo first beta available
 
Quote:
Originally Posted by maacruz (Post 978311)
[bluez-utils-test] Already uploaded to the garage page.
It installed fine and minigpsd is now happy again.

maacruz 2011-03-30 11:13
Re: ANNOUNCE: Diablo-Turbo first beta available
 
Quote:
Originally Posted by auouymous (Post 978096)
Then edit /mnt/initfs/bootmenu.conf so it boots as ext3 and reboot.
That's if you are using bootmenu, but bootmenu is not needed to boot from mmc, you can setup the device to boot first from mmc using flasher (from your PC "flasher-3.0 --set-root-device mmc") or cal-tool (from your device "chroot /mnt/initfs cal-tool -R mmc")


All times are GMT. The time now is 16:41.
Page 33 of 62 « First 233132 33 343543 Last »
Show 40 post(s) from this thread on one page

vBulletin® Version 3.8.8