maemo.org - Talk - [Announce] USB hostmode beta release

maemo.org - Talk (https://talk.maemo.org/index.php)

- Nokia N900 (https://talk.maemo.org/forumdisplay.php?f=44)

- - [Announce] USB hostmode beta release (https://talk.maemo.org/showthread.php?t=65232)

Re: [Announce] USB hostmode beta release

just transferred 1.5 GB of media files from my microSD card to another microSD card using a Trans Flash via h-e-n host mode. everything is awesome! files are okay, nothing was broken or corrupted. yes!!!!

Re: [Announce] USB hostmode beta release

okay, the no audio and no camera issue is back after i perform the post #366......why?

Re: [Announce] USB hostmode beta release

I successfully mounted Nokia N95 in Mass storage mode, meanwhile PC Suite mode didn't work.

Re: [Announce] USB hostmode beta release

Hi guys,
I was looking for stylish cable for h-e-n project and I found many different kinds but all of them looked ugly in my eyes, so I decided to buy INCOMPATIBLE one form N8 - CA-157 square one, and give it a try ;) ( I knew it wont fit first :p )
So here are what I did:
You only need key-file (small needle file for metal) TOOL and DESIRE!
Make sure that it fits easily, do not apply much pressure when you connect it to N900 port, compare with your stock/charger cable! If it's not fit easily then continue with the file tool until it fits nicely!

Even ID PIN is detected now :)
dmesg when cable is connected

Code:

tw14030_usb tw14030_usb: HW_CONDITIONS 0x54/84; link 3

You can give it a try if you want!

The other cable on the picture is bundle one it came with my device part.# CA-101D

For tose of you that do not want to play with file tool you can look this one: ARCHOS 7 OTG or this

NOT offtopic: I deleted all of my unnecessary post here: You should do the same! And my be that will bring back the developers here!

Re: [Announce] USB hostmode beta release

mveplus,
btw. Where did you get that other lengthy cable? Did it come with N900? Mine is mighty long.

Re: [Announce] USB hostmode beta release

Quote:

Originally Posted by teamer (Post 873762)

installed h-e-n , attached flash memory , mouse , keyboard ...
well , the leds on the devices works , but nothing mounted :s

i use the latest firmware update , no custom kernel .
anyone could tell me how to install the kernel 44 thing ?

thanks

READ THE WHOLE THREAD!!! ESPECIALLY #9 (you as well can delete your useless post)

Re: [Announce] USB hostmode beta release

Excellent!...........works perfectly!

Word of advice, I was pulling my hair our trying to make this work......GET A GOOD QUALITY USB ADAPTER!.....I was trying with a chineese one and it didn`t work.The new adapter made the difference.I nstalled v.45 kernel, HEN 0.2.8 , mount and boom all is working....no need to do any commands in terminal!

KUDOS TO EVERYBODY who worked their *** off to make this work!

Re: [Announce] USB hostmode beta release

sophocha you can run mouse and keyboard???

how??

i only can with pendrive with pr 1.3 and kernel 45 and bthid scripts mice

mouse have energy but not move and keyboard nothing and ps3 gamepad only run with kernel pr 1.3 original or hen incompatibility

Re: [Announce] USB hostmode beta release

Quote:

Originally Posted by samipower (Post 874084)

Are you sure it is a problem with the kernel? I haven't tested it with the latest power kernel yet, but with the version in extras it works perfectly.
I think the problem is caused by the BT-HID scripts. BT-HID support is not compatible with the PS3 controller program. But you can disable the BT input profile and thus enable the playstation controller compatibility. (as explained in the topic start of the bt HID scripts)

what happens if you run "set-bt-input off" as root in a terminal?
After that the playstation controller should work

Re: [Announce] USB hostmode beta release

does the mouse / ps3 gamepad show up in dmesg?
fine!
then how the F*** is that related to h-e-n?